Module 8: Decontamination Point of Use Preparation and Transport
10 Questions
1 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is an essential requirement for the immersion method of cleaning devices?

  • A sink with a brush for scrubbing
  • A sink with a mixture of water and detergent
  • A sink that can hold enough water and detergent to fully immerse the item (correct)
  • A sink with warm water
  • Why is temperature control important in the wash and rinse sinks?

  • To create a warm detergent solution
  • To avoid splashing and aerosols
  • To ensure the brushes are sanitized
  • To keep the temperature below 40C (correct)
  • What is the preferred type of taps for controlling temperature in the wash and rinse sinks?

  • Sensor-activated taps
  • Twist knobs
  • Manual push-button taps
  • Thermostatic mixer taps (correct)
  • Why is it recommended to use a selection of nondamaging brushes in different sizes for cleaning devices?

    <p>To clean both external and internal surfaces effectively</p> Signup and view all the answers

    Why should brushes be used under water during cleaning?

    <p>To prevent aerosols and splashing</p> Signup and view all the answers

    What is the recommendation for drying manually washed devices that will not go through a washer-disinfector?

    <p>Place devices in a drying cabinet</p> Signup and view all the answers

    What should be used if a drying cabinet is not available to dry washed devices?

    <p>A lint-free, absorbent wipe</p> Signup and view all the answers

    Why is it necessary to follow written procedures for effective manual cleaning of devices?

    <p>To maintain consistency and quality of cleaning</p> Signup and view all the answers

    What is the significance of wearing PPE while handling contaminated devices?

    <p>To protect against potential hazards during cleaning</p> Signup and view all the answers

    Why is single-use preferable when it comes to using brushes for cleaning devices?

    <p>To reduce the risk of cross-contamination</p> Signup and view all the answers

    More Like This

    Use Quizgecko on...
    Browser
    Browser