Mobile Communication Network Setup Procedure
5 Questions
1 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What does the mobile unit do when turned on?

  • Initiates a handshake with the called unit
  • Sends a request for connection to the MTSO
  • Transmits on the reverse channel immediately
  • Scans and selects the strongest setup control channel (correct)

    • What happens when the mobile unit enters a new cell?

  • The MTSO attempts to complete the connection to the called unit
  • A new BS is selected (correct)
  • The call is dropped
  • The mobile unit switches to a different frequency band

    • What does the mobile unit do to initiate a call?

  • Monitors all setup channels simultaneously
  • Transmits on all reverse channels
  • Sends the number of the called unit on the pre-selected setup channel (correct)
  • Sends a request to the MTSO directly

    • What does the MTSO do after receiving the request for connection from the BS?

    <p>Attempts to complete the connection to the called unit</p> Signup and view all the answers

    What does the receiver at the mobile unit do before transmitting on the reverse channel?

    <p>Checks that the setup channel is idle</p> Signup and view all the answers

    More Like This

    Use Quizgecko on...
    Browser
    Open
    Browser
    Browser