Podcast
Questions and Answers
What does the 'connection-state=established' matcher mark?
What does the 'connection-state=established' matcher mark?
- Packet belongs to an existing connection, for example a reply packet or a packet which belongs to already replied connection (correct)
- Packet does not correspond to any known connection
- Packet is related to, but not part of an existing connection
- Packet begins a new TCP connection
Which protocol is used for Ping and Trace route?
Which protocol is used for Ping and Trace route?
- IP
- ICMP - ping (correct)
- UDP - trace route
- TCP
If 'check-gateway' is enabled for an ECMP route and one of the gateways is unreachable, then:
If 'check-gateway' is enabled for an ECMP route and one of the gateways is unreachable, then:
- ECMP is going to send packets to all gateways even if one is unreachable (correct)
- The ECMP route becomes inactive
- The unreachable gateway is not going be used in Round Robin algorithm
Which of the following protocols/ports are used for SNMP (Simple Network Management Protocol)?
Which of the following protocols/ports are used for SNMP (Simple Network Management Protocol)?
What is marked by 'connection-state=invalid' matcher?
What is marked by 'connection-state=invalid' matcher?
Which protocol/port is typically used for DHCP (Dynamic Host Configuration Protocol)?
Which protocol/port is typically used for DHCP (Dynamic Host Configuration Protocol)?
When clicking the 'Backup' button in WinBox's Files window, what happens?
When clicking the 'Backup' button in WinBox's Files window, what happens?
What is required to connect a MikroTik router to a wireless access point?
What is required to connect a MikroTik router to a wireless access point?
Is it possible to limit how many clients are able to connect to an access point?
Is it possible to limit how many clients are able to connect to an access point?
Can you manually add drivers to RouterOS in case your PCI Ethernet card is not recognized?
Can you manually add drivers to RouterOS in case your PCI Ethernet card is not recognized?
How many wireless clients can connect when a wireless card is configured to mode=bridge?
How many wireless clients can connect when a wireless card is configured to mode=bridge?
Which protocol does Ping use?
Which protocol does Ping use?
If you use either Telnet or FTP, which is the highest layer you are using to transmit data?
If you use either Telnet or FTP, which is the highest layer you are using to transmit data?
What is the correct order for PPPoE discovery stage?
What is the correct order for PPPoE discovery stage?
