Podcast
Questions and Answers
What is the first step in the procedure described?
What is the first step in the procedure described?
- Determine the working length
- Use the ProTaper S1 and S2 instruments
- Use a No. 10K File to negotiate the canal (correct)
- Irrigate the canal
After using the ProTaper S1 and S2 instruments, what should be done?
After using the ProTaper S1 and S2 instruments, what should be done?
- Irrigate, recapitulate, and re-irrigate (correct)
- Irrigate and recapitulate
- Determine the working length again
- Proceed directly to the F1 instrument
What should be done if the F1 instrument ceases to advance deeper into the canal?
What should be done if the F1 instrument ceases to advance deeper into the canal?
- Remove the file, clear its blades, then continue using it (correct)
- Irrigate and recapitulate
- Determine the working length again
- Switch to a different instrument
After using the F1 instrument, what should be done next?
After using the F1 instrument, what should be done next?
If the 20 hand file is snug at length after using the F1 instrument, what should be done?
If the 20 hand file is snug at length after using the F1 instrument, what should be done?
If the 20 hand file is loose at length after using the F1 instrument, what should be done?
If the 20 hand file is loose at length after using the F1 instrument, what should be done?
What should be done after using the F2 or F3 instrument?
What should be done after using the F2 or F3 instrument?
What is the purpose of using the ProTaper S1 and S2 instruments?
What is the purpose of using the ProTaper S1 and S2 instruments?
What is the purpose of using the F1, F2, and F3 instruments?
What is the purpose of using the F1, F2, and F3 instruments?
What is the importance of irrigating, recapitulating, and re-irrigating during the procedure?
What is the importance of irrigating, recapitulating, and re-irrigating during the procedure?