22 Questions
What is the main purpose of the Maintenance process according to ISO/IEC/IEEE 15288?
To sustain the capability of the system to provide a service
Which activities are typically included in the Maintenance process?
Logistics support and material management
What are the typical outputs of the Maintenance process?
Maintenance and logistics report
Which inputs are required for the Maintenance process?
Life cycle concepts and operational system
What is the primary focus of the Maintenance process?
Sustaining system's ability to provide services
Which process is often concurrent with the Maintenance process?
Operation process
What controls are considered enablers for the Maintenance process?
Quality assurance and risk management
What constraints are imposed on the solution in the Maintenance process?
Requirements imposed on enabling systems
What are the typical outputs related to logistics in the Maintenance process?
'Maintenance and logistics report'
'Prepare for maintenance' is an activity related to:
''Maintenance' department
Which personnel need to be trained for the Maintenance process?
Technical support and maintenance personnel
What does the IPO diagram represent for the Maintenance process?
Input-Processing-Output diagram for integrated maintenance and logistics activities
What is the main focus of the Maintenance process?
Defining and maintaining strategies
Which type of maintenance uses data to predict failures?
Predictive maintenance
When should enabling systems, products, and materials needed for maintenance and logistics support be identified?
Early in the life cycle
What triggers maintenance actions in other systems?
Failure or malfunction of any system
Which activity is not included in the Maintenance process?
Conducting logistics operations
What is the purpose of preventive maintenance?
To schedule routine maintenance
Which type of maintenance restores system services to normal operation?
Corrective maintenance
What should the Maintenance of the SoI be coordinated with?
Maintenance of other systems in its environment
What drives changes in system of interest (SoI) according to the Maintenance process?
Maintenance process identifies requirements and design gaps
When should inputs and outputs for Maintenance process be referred to?
At the beginning of the life cycle
Study Notes
- The SE Handbook, Fifth Edition PDF is for personal use only and cannot be uploaded or distributed publicly.
- Maintenance process identifies requirements and design gaps, drives changes in system of interest (SoI), and supports the operation of the SoI throughout its life cycle.
- Inputs and outputs for Maintenance process are listed in Figure 2.55, descriptions provided in Appendix E.
- Activities for Maintenance process include: defining and maintaining strategies, identifying relevant regulations, planning for maintenance and logistics support, performing maintenance, conducting logistics operations, managing results, and initiating changes.
- Corrective maintenance restores system services to normal operation, preventive maintenance schedules routine maintenance, predictive maintenance uses data to predict failures, and system modification changes the system to sustain capabilities.
- Enabling systems, products, services, and materials needed for maintenance and logistics support should be identified early in the life cycle to allow for lead time.
- Maintenance of the SoI must be coordinated with the maintenance of other systems in its environment.
- Failure or malfunction of any system can trigger maintenance actions in other systems due to various reasons.
- Different modes of maintenance include corrective, preventive, predictive, and system modification.
This quiz covers the purpose and description of the Maintenance process as outlined in ISO/IEC/IEEE 15288. It includes the activities related to sustaining the system's capability to provide services for the operating organization's benefit.
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free
