Magnetic Pickup (MPU) in Engine Control

To increase or decrease the ramp rate for starting and taking load.

The actuator controls the flow of fuel into the engine, similar to the fuel pedal in a car.

A relay is an electrically operated switch used to control a circuit by an independent low-power signal or to control multiple circuits with one signal.

<p>Latching relays require only a single pulse of control power to operate the switch persistently, and a second pulse or a pulse with opposite polarity to reset the switch.</p> Signup and view all the answers

<p>Magnetic latching relays are useful in applications where interrupted power should not affect the circuits they control.</p> Signup and view all the answers

<p>A starter relay serves as an electrical circuit completer or circuit breaker between the generator’s battery and the starter motor.</p> Signup and view all the answers

<p>To generate a voltage pulse each time a gear tooth passes the end of the sensor and provide an AC voltage reference for the speed controller to manage fuel allowance and engine speed.</p> Signup and view all the answers

<p>It automatically manages the engine speed when there are more demanding loads and controls the fuel demand on a generator.</p> Signup and view all the answers

<p>Speed, idle, stability, gain, starting fuel, and speed ramping.</p> Signup and view all the answers

<p>It is used for the idling speed when enabled.</p> Signup and view all the answers