IS I 2492 - 1976 Members Directorate of Military Farms Quiz

What is the recommended speed for the mechanical agitator to run at?

What material is the agitator shaft made of?

How long should it take for the agitator to mix the milk sufficiently?

What type of motor drives the side agitator?

What is the minimum diameter of the toughened glass in the light and sight glass assemblies?

What type of protection does the induction motor have?

Where should the step bearing at the bottom of the vertical shaft agitator be located?

What is used to protect the opening for the agitator shaft from external matter?

What is another name for a mechanical seal?

The mechanical agitator typically runs at 42 rpm to ensure proper mixing of milk in the tank within 10 min.

The agitator shaft is made of a single piece solid rod of stainless steel with a diameter of 40 mm.

The step bearing at the bottom of the vertical shaft agitator should not interfere with the drainage of milk from the tank.

The light glass assembly should be provided with a lamp holder made of stainless steel.

The stainless steel sight glass assembly must be positioned in a way that provides a partial view of the inside of the tank.

The side agitator consists of a stainless steel shaft and is driven by a 6 pole TEFC squirrel cage flanged induction motor.

The agitator assembly should be mounted on an aluminum supporting structure.

The opening for the agitator shaft is protected against entrance of external matter by providing permanently fixed fittings.

The lamp used for the light glass assembly must operate on a 12 V dc system.

The mechanical seal provided for the side agitator ensures airtightness within the tank.