How well do you know E-band radio polarities and antenna options?
5 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the purpose of a Geiger meter in the context of network testing?

  • To analyze radio frequency signals
  • To test the voltage of network components
  • To detect and measure ionizing radiation emissions from network equipment and cables (correct)
  • To measure the speed of data transfer

    • When should a coax cable be tested?

  • Never, coax cables do not need to be tested
  • Only when there is packet loss between MBU and radio
  • Anytime a new fitting or connector is added (correct)
  • When a customer is only receiving 100mbps

    • What is the default IP address of an Aviat?

  • 10.10.1.1
  • 192.168.1.1
  • 192.168.1.10 (correct)
  • 192.168.0.1

    • What is the purpose of a weep hole on an antenna or radome?

    <p>To allow for drainage of water or condensation</p> Signup and view all the answers

    What is the purpose of 'clear grease' on an Aviat?

    <p>To prevent water from entering through O-ring gaskets</p> Signup and view all the answers

    More Like This

    Use Quizgecko on...
    Browser
    Open
    Browser
    Browser