35 Questions
What should the operator do before driving the vehicle?
Thoroughly familiarize themselves with the steering and handling of the vehicle
What should be done to cool down the turbo?
Let the engine run at idle for a few minutes
What is the purpose of the parking brake?
To prevent the vehicle from moving
Why is it important to wear a seat belt?
To prevent injury or death in case of an accident
What should be done to the transmission lever before driving?
Turn it to the neutral position
What should you ensure before using the vehicle?
The brake system operates properly
What is the purpose of the back-up alarm?
To prevent accidents when reversing
Why is it essential to keep radiators and oil coolers clean?
To prevent component overheating
What should you check before operating the vehicle?
The fuel level and DEF/AdBlue level
What hazardous gases are produced by a running engine?
Carbon monoxide and oxygen
What should you do if the hydraulic oil temperature is low?
Reduce the load on the engine and accessories until the normal oil temperature is reached
What is the purpose of the hazard lights?
To alert other vehicles to a potential hazard
What information can be found on page 103 of the manual?
Engine operating hours
What should you do if the vehicle is in limp home mode?
Check the main screen for a problem or fault
What is the purpose of the time of day display?
To show the time of day for the driver's convenience
What is required to clear the fault indication on the display?
A complete brake application cycle with the seat belt buckled
What is the function of the knob located on the overhead console?
To increase the fan speed
What happens to a fault once it has been cleared?
It is recorded in the microcontroller fault log as passive
What is the purpose of the erasing sequence?
To clear the fault indication on the display
What action is required to modify the fault status from active to passive?
Clearing the fault using the erasing sequence
The _______________ knob is located on the overhead console.
temperature control
The _______________ unit is located in the instrument cluster.
audio
The _______________ switch is used to turn on the strobe lights.
beacon light
The _______________ switch is used to turn on the rear window defroster.
rear window defroster
The _______________ switch is used to turn on the rear wiper.
rear wiper
What does the signal word DANGER indicate?
An immediate hazardous situation which will result in death or serious injury.
What should you do before refueling the vehicle?
Switch off the heater.
What is the purpose of the CAUTION signal word?
To indicate a potentially hazardous situation which may result in minor or moderate injury.
What does the NOTICE signal word indicate?
A situation that may result in damage or destruction of a component or system.
What is the purpose of the WARNING signal word?
To indicate a potentially hazardous situation which may result in death or serious injury.
What is the significance of the ENVIRONMENTAL PROTECTION icon?
It indicates information on environmental management.
What is the purpose of the symbol?
To prohibit an action.
What does the signal word signal?
A situation that may result in death or serious injury.
What is the purpose of the labels on the vehicle?
To provide warnings and cautions.
Why are signal words and symbols important?
They warn of potential hazards and provide safety guidance.
Learn about the importance of maintaining your vehicle's critical components, performing routine checks, and understanding safety features to avoid accidents and engine problems.
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free
