Hand and Finger Injuries Safety Quiz
84 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

A crew member gave the signal to raise the crane ______.

hook

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the ______ it publishes.

documents

A tag line attached to the slings snagged on carabiners connected to the crew member's ______.

harness

The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their ______.

<p>operations</p> Signup and view all the answers

The lift was quickly stopped by the ______.

<p>banksman</p> Signup and view all the answers

If the job changes – STOP, re-assess, if necessary, activate a 'Management of ______' process.

<p>Change</p> Signup and view all the answers

There was a catastrophic failure of a diesel ______ on a vessel.

<p>generator</p> Signup and view all the answers

Wearing gloves would have prevented the ______.

<p>injury</p> Signup and view all the answers

The generator failure led to engine components being ejected by ______.

<p>force</p> Signup and view all the answers

The Hi-Fog fixed firefighting system was activated during the ______ room fire.

<p>engine</p> Signup and view all the answers

Gloves you can replace: fingers and hands, you can’t. Remember to use your ______!

<p>PPE</p> Signup and view all the answers

Onshore emergency response teams were assembled to support the vessel in case of ______.

<p>need</p> Signup and view all the answers

A crew member’s work restraint lanyard became entangled in a ______ and wire sling.

<p>hook</p> Signup and view all the answers

The fire was extinguished with limited damage to any further ______.

<p>machinery</p> Signup and view all the answers

Hand and finger injuries continue to be a significant theme in the incidents shared with IMCA by its members, particularly regarding ______ activities.

<p>manual handling</p> Signup and view all the answers

The incident happened during lifting operations offshore at a ______.

<p>wind turbine</p> Signup and view all the answers

A deckhand and trainee deckhand were both on deck receiving a load of four lifting bags, attached by a ______ wire sling.

<p>three-leg</p> Signup and view all the answers

The movement of the ram crushed the worker’s finger causing a ______ in the skin and a fracture.

<p>spit</p> Signup and view all the answers

Safety alerts can be sent by adding ______ to your internal distribution list.

<p><a href="mailto:[email protected]">[email protected]</a></p> Signup and view all the answers

The effectiveness of the IMCA Safety Flash system depends on members sharing ______.

<p>information</p> Signup and view all the answers

Before starting work, it is important to take the time to think things through and reassess the ______.

<p>hazard</p> Signup and view all the answers

In the incident described, the ram was placed on a flat pallet, which increased the potential for ______.

<p>movement</p> Signup and view all the answers

A toolbox talk had been conducted, but the full scope of the work had not been adequately ______.

<p>assessed</p> Signup and view all the answers

The crushed finger incident highlights the importance of ______ when dealing with heavy or movable objects.

<p>safety precautions</p> Signup and view all the answers

A catastrophic failure within one ______ generator caused the engine room fire.

<p>diesel</p> Signup and view all the answers

The Hi-Fog fixed firefighting system worked and provided good ______ capabilities.

<p>extinguishing</p> Signup and view all the answers

Fire-suits and associated equipment provided good protection from ______ and fire.

<p>heat</p> Signup and view all the answers

The offshore vessel management team demonstrated highly effective ______ in managing their response.

<p>leadership</p> Signup and view all the answers

A Thermal Imaging Camera could be useful in support of ______ teams.

<p>firefighting</p> Signup and view all the answers

Fire booklets should give details on the general layout, equipment, search routes, and ______ of each major area.

<p>length of hose runs</p> Signup and view all the answers

Emergency response plans should determine if the chosen ______ are correct.

<p>communications</p> Signup and view all the answers

BSEE has released Safety Alert 482 entitled Risk Based ______ Identifies Applicable Welding and Burning Hazards.

<p>Inspection</p> Signup and view all the answers

Multiple high potential fires were associated with welding and ______ operations.

<p>burning</p> Signup and view all the answers

Inspections revealed inadequate ______ practices with materials found close to hot work areas.

<p>housekeeping</p> Signup and view all the answers

Tools for fire prevention, such as fire extinguishers, were not properly ______.

<p>identified</p> Signup and view all the answers

There was inconsistent and infrequent training for personnel engaged in hot work and/or ______.

<p>welding</p> Signup and view all the answers

Hot work permits allowed the same person to perform fire watch and perform the hot ______.

<p>work</p> Signup and view all the answers

Ensure there are no flammable materials or hydrocarbons or other fire hazards nearby when preparing for _____ work;

<p>hot</p> Signup and view all the answers

Hot work operations should be inspected by someone in _____ before starting work;

<p>charge</p> Signup and view all the answers

Ensure a heightened level of planning specific to the hazards associated with _____ and burning operations;

<p>welding</p> Signup and view all the answers

Make sure that all persons involved in hot work attend and participate in pre-job _____ meetings;

<p>JSA</p> Signup and view all the answers

Check that training and competence requirements for persons doing hot work are in place and that they meet appropriate industry _____;

<p>standards</p> Signup and view all the answers

What specific incident involving a worker's hand was reported, and what caused the injury?

<p>A worker suffered a crushed right little finger while moving the moonpool door ram due to its placement on a flat pallet, leading to movement.</p> Signup and view all the answers

After conducting a toolbox talk, what crucial aspect was overlooked that contributed to the injury incident?

<p>The full scope of the work was not adequately assessed, particularly the potential movement of the ram.</p> Signup and view all the answers

What vital lesson was highlighted from the incident involving the crush injury to the worker's finger?

<p>The incident highlighted the importance of stopping to think and reassess hazards before starting work.</p> Signup and view all the answers

What action can IMCA members take to improve the effectiveness of their Safety Flash system?

<p>Members can share incident information and add <a href="mailto:[email protected]">[email protected]</a> to their internal distribution list for safety alerts.</p> Signup and view all the answers

Why is it essential to evaluate the risks before manual handling tasks, as reinforced by the incident discussed?

<p>Evaluating risks is essential to foresee and mitigate potential hazards, such as equipment movement that could cause injury.</p> Signup and view all the answers

What role did the environment, specifically the placement of equipment, play in the worker's injury?

<p>The flat pallet increased the potential for movement of the ram, which was not anticipated during the task.</p> Signup and view all the answers

What aspect of safety communication does the IMCA Safety Flash emphasize for its members?

<p>It emphasizes the importance of sharing information about incidents to learn lessons and prevent future occurrences.</p> Signup and view all the answers

How does the IMCA recommend handling new safety alerts to prevent similar incidents?

<p>They recommend subscribing to safety alerts through adding <a href="mailto:[email protected]">[email protected]</a> to internal distribution lists.</p> Signup and view all the answers

What was the primary reason the trainee's work restraint lanyard became entangled?

<p>The lanyard was worn loosely, making it susceptible to snagging.</p> Signup and view all the answers

How did the trainee manage to fall without sustaining injuries?

<p>The trainee fell onto a group of lifting bags, which cushioned the landing.</p> Signup and view all the answers

What actions indicated a quick and effective response during the crane incident?

<p>The banksman and crane operator promptly stopped the lift when the crew member was entangled.</p> Signup and view all the answers

What was the primary error made by the crew member during the lifting operation?

<p>The crew member stood in a hazardous position without recognizing the risks involved.</p> Signup and view all the answers

What communication failure contributed to the incident?

<p>The crane operator did not see or respond to the emergency stop signal.</p> Signup and view all the answers

What is one key lesson learned regarding lanyard usage?

<p>Lanyards should be secured and kept away from potential entanglement hazards.</p> Signup and view all the answers

What general lesson should crew members take away concerning their positions during lifts?

<p>Crew members should always be aware of their surroundings and avoid hazardous locations near lifting operations.</p> Signup and view all the answers

Before instructing the crane operator to raise equipment, what precaution should be taken?

<p>Ensure all lifting accessories are fully clear of any potential snagging points.</p> Signup and view all the answers

What caused the catastrophic failure of the diesel generator in the engine room?

<p>The generator experienced a catastrophic failure that ejected engine components.</p> Signup and view all the answers

What was done to manage the engine room fire following the generator failure?

<p>The Hi-Fog firefighting system was activated and emergency teams were mustered.</p> Signup and view all the answers

What action should crew members take if they notice potential hazards?

<p>They should always speak up and be prepared to STOP THE JOB.</p> Signup and view all the answers

What should personnel do to maintain awareness during lifting operations?

<p>Pay attention, even if there is no load or the lift is underway.</p> Signup and view all the answers

Despite the generator failure and fire, what was the outcome concerning personnel safety?

<p>No personnel were harmed during the incident.</p> Signup and view all the answers

How did the crew ensure safety after the engine room fire was extinguished?

<p>Non-essential personnel were mustered and assessed to ensure safety during the incident.</p> Signup and view all the answers

What safety practice can prevent lanyards from getting snagged?

<p>Manually guiding lifting accessories away from crew members can help prevent snagging.</p> Signup and view all the answers

What steps did the crew take after the incident to prevent future occurrences?

<p>The CTV operator reviewed procedures and discussed the incident with the crew.</p> Signup and view all the answers

What caused the engine room fire on the offshore vessel?

<p>A catastrophic failure within one diesel generator caused the engine room fire.</p> Signup and view all the answers

How effective was the Hi-Fog fixed firefighting system during the incident?

<p>The Hi-Fog fixed firefighting system worked effectively, providing good extinguishing capabilities.</p> Signup and view all the answers

What role did the fire-suits and PPE play in the emergency response?

<p>The fire-suits and associated equipment provided good protection from heat and fire, enhancing safety for responders.</p> Signup and view all the answers

What was one major lesson learned regarding firefighting support?

<p>A Thermal Imaging Camera could be useful in support of firefighting teams.</p> Signup and view all the answers

What should emergency response teams become familiar with?

<p>Emergency response teams should ensure familiarity with all applicable emergency procedures.</p> Signup and view all the answers

What recommendation was made for fire booklets at each fire station?

<p>Fire booklets should provide details on the general layout, equipment, search routes, and isolations.</p> Signup and view all the answers

What aspect of emergency response plans requires review according to the findings?

<p>Emergency response plans should be reviewed to ensure that chosen communications are correct.</p> Signup and view all the answers

What organizational qualities were demonstrated by the offshore vessel management team?

<p>The offshore vessel management team demonstrated highly effective leadership and decisive problem-solving during the emergency.</p> Signup and view all the answers

What should be done to minimize fire hazards before commencing hot work?

<p>Ensure there are no flammable materials or hydrocarbons nearby.</p> Signup and view all the answers

Why is it important to have fire protection barriers in place during hot work?

<p>Fire protection barriers help mitigate risks associated with hot work activities.</p> Signup and view all the answers

What process should individuals involved in hot work undergo before starting their tasks?

<p>They should attend and participate in pre-job JSA meetings and toolbox talks.</p> Signup and view all the answers

What role does supervision play during hot work operations?

<p>Adequate supervision and fire watches are necessary throughout the hot work.</p> Signup and view all the answers

What must be ensured regarding the training of individuals performing hot work?

<p>Training and competence requirements must meet appropriate industry standards.</p> Signup and view all the answers

What critical issues were noted during inspections related to hot work operations?

<p>Critical issues included inadequate housekeeping, personnel not following safe procedures, and lack of proper fire prevention tools.</p> Signup and view all the answers

Explain the risks associated with conducting hot work near hydrocarbons.

<p>Conducting hot work near hydrocarbons presents risks such as fire hazards due to sparks igniting flammable materials.</p> Signup and view all the answers

What were the consequences of inadequate training for personnel engaged in hot work?

<p>Inadequate training can result in personnel not following established procedures, leading to increased risk of accidents and fires.</p> Signup and view all the answers

How did the hot work incident lead to a fire in the living quarters?

<p>Hot slag from a cutting torch likely ignited the wooden subfloor of the living quarters after piercing a blanket barrier.</p> Signup and view all the answers

What safety measures should be taken to prevent incidents during hot work operations?

<p>Safety measures include maintaining proper distances from flammable materials, conducting thorough inspections, and ensuring personnel are well-trained.</p> Signup and view all the answers

Study Notes

Hand and Finger Injuries

  • Hand and finger injuries are a recurring safety concern
  • Two recent incidents are highlighted
  • Incident 1: A worker crushed their small finger while moving a moonpool door ram. The ram moved unexpectedly, despite a toolbox talk on manual handling. No-one stopped to assess the risk of the ram moving. Resulting in a crushed finger.
  • Incident 2: A worker cut their hand on a ceiling plate. They weren't wearing gloves.
  • Lessons: Stop and think before starting work. Be aware of your surroundings. Use appropriate personal protective equipment (PPE).

Crewmember Suspended Above Deck

  • A crew member's lanyard became entangled in lifting equipment.
  • The crew member was suspended a short distance from the deck.
  • The incident happened during lifting operations offshore.
  • The crew member fell onto a group of lifting bags on deck.
  • What went wrong: Crew member's lanyard had a loose position, crew member was too close to the equipment when it was raised. Crane operator didn't respond to the emergency stop signal.

CTV Crew Member Snagged on Tag Line

  • A crew member snagged their harness on a tag line while guiding slings.
  • The crew member was lifted.
  • The banksman quickly stopped the lift.
  • What went right: Quick response by banksman and crane operator.
  • What went wrong: Crew member in a hazardous position.

Engine Failure and Engine Room Fire

  • A diesel generator catastrophically failed, causing a fire in the engine room.
  • Hi-Fog fixed firefighting system was activated effectively.
  • Onshore emergency response teams assisted the vessel..
  • Only limited damage to machinery occurred.
  • Findings:
    • Catastrophic failure of one generator
    • Damage to a second generator
    • Hi-Fog system was effective.
    • Fire suits and PPE were effective
    • Effective response from offshore and onboard teams.
  • Lessons: A thermal imaging camera is potentially helpful. Ensure all personnel are familiar with emergency procedures.

BSEE: Welding and Burning Hazards

  • BSEE discovered several critical issues with welding and burning operations in the Gulf of Mexico.
  • Hot slag from a cutting torch pierced the underside blanket barrier, causing a fire.
  • Issues:
    • Hot work close to equipment containing hydrocarbons.
    • Inadequate housekeeping practices.
    • Tools for fire prevention not properly identified.
    • Offshore personnel not following hot work procedures.
    • Inconsistent training for personnel.
    • Hot work permits in same persons.
  • Recommendations:
    • Ensure there are no flammable materials/hydrocarbons/fire hazards nearby.
    • Ensure the correct condition rating and placement of fire protection equipment.
    • Review emergency response plans.
    • Check appropriate training and competence.

Studying That Suits You

Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

Quiz Team

Related Documents

IMCA Safety Flash 10-24 PDF

Description

This quiz covers recent incidents of hand and finger injuries in the workplace, highlighting the importance of safety measures and personal protective equipment. Participants will learn crucial lessons from these incidents to improve safety practices and prevent future injuries.

More Like This

Use Quizgecko on...
Browser
Open
Browser
Browser