Podcast
Questions and Answers
What is the work possess for a helium gas at 20°C?
What is the work possess for a helium gas at 20°C?
- 168 kJ/kg
- 609 kJ/kg (correct)
- 229 kJ/kg
- 339 kJ/kg
What type of gas is in the 1 m3 tank at 200 kPa and 88°C?
What type of gas is in the 1 m3 tank at 200 kPa and 88°C?
- Helium (correct)
- Ethene
- Ethane
- Methane
If the internal energy of Helium is 200 kJ/kg, what is its enthalpy?
If the internal energy of Helium is 200 kJ/kg, what is its enthalpy?
- 333.42 kJ/kg
- 168 kJ/kg
- 144 kJ/kg
- 223.42 kJ/kg (correct)
What is the mass of a 2 m3 propane at 280 kPa and 40°C?
What is the mass of a 2 m3 propane at 280 kPa and 40°C?
What is the air flow in ft3/min of mechanical ventilation required to exhaust an accumulation of refrigerant due to leaks of the system for a mass of 4 lbs refrigerant?
What is the air flow in ft3/min of mechanical ventilation required to exhaust an accumulation of refrigerant due to leaks of the system for a mass of 4 lbs refrigerant?
What is the free aperture cross section in m3 for the ventilation of a machinery room if the mass of refrigerant is 9 kg?
What is the free aperture cross section in m3 for the ventilation of a machinery room if the mass of refrigerant is 9 kg?
What is the hydraulic gradient of a 1 mile, 17 inches inside diameter pipe when 3300 gal/min of water flow with f = 0.03?
What is the hydraulic gradient of a 1 mile, 17 inches inside diameter pipe when 3300 gal/min of water flow with f = 0.03?
Find the loss of head in the pipe entrance if speed of flow is 10 m/s.
Find the loss of head in the pipe entrance if speed of flow is 10 m/s.
Wet material, containing 220% moisture (dry basis), is to be dried at a rate of 1.5 kg/s in a continuous dryer to give a product containing 10% (dry basis). Find the moisture removed in kg/hr.
Wet material, containing 220% moisture (dry basis), is to be dried at a rate of 1.5 kg/s in a continuous dryer to give a product containing 10% (dry basis). Find the moisture removed in kg/hr.
Copra enters a dryer containing 70% moisture and leaves 7% moisture. Find the moisture removed on each pound of solid in the final product.
Copra enters a dryer containing 70% moisture and leaves 7% moisture. Find the moisture removed on each pound of solid in the final product.
A 1 m x 1.5 m cylindrical tank is full of oil with SG = 0.92. Find the force acting at the bottom of the tank in dynes.
A 1 m x 1.5 m cylindrical tank is full of oil with SG = 0.92. Find the force acting at the bottom of the tank in dynes.
Find the pressure at the 100-fathom depth of water in kPa.
Find the pressure at the 100-fathom depth of water in kPa.
Find the mass of 10 quartz of water.
Find the mass of 10 quartz of water.
Find the mass of carbon dioxide having a pressure of 20 psia at 200°F with 10 ft3 volume.
Find the mass of carbon dioxide having a pressure of 20 psia at 200°F with 10 ft3 volume.
Find the heat needed to raise the temperature of water from 30°C to 100°C with 60% quality.
Find the heat needed to raise the temperature of water from 30°C to 100°C with 60% quality.
Find the enthalpy of water at 212°F and 14.7 psi if the dryness factor is 30%.
Find the enthalpy of water at 212°F and 14.7 psi if the dryness factor is 30%.
Flashcards are hidden until you start studying
Study Notes
Thermodynamic Properties
- The work possess for a helium gas at 20°C is unknown.
- A 1 m3 tank at 200 kPa and 88°C contains an unknown type of gas.
Internal Energy and Enthalpy
- The internal energy of Helium is 200 kJ/kg.
- The enthalpy of Helium is unknown.
Mass of Gases
- The mass of a 2 m3 propane at 280 kPa and 40°C is unknown.
- The mass of carbon dioxide having a pressure of 20 psia at 200°F with 10 ft3 volume is unknown.
Ventilation and Flow Rate
- The air flow in ft3/min of mechanical ventilation required to exhaust an accumulation of refrigerant due to leaks of the system for a mass of 4 lbs refrigerant is unknown.
- The free aperture cross section in m3 for the ventilation of a machinery room if the mass of refrigerant is 9 kg is unknown.
Pipe Flow
- The hydraulic gradient of a 1 mile, 17 inches inside diameter pipe when 3300 gal/min of water flow with f = 0.03 is unknown.
- The loss of head in the pipe entrance if speed of flow is 10 m/s is unknown.
Drying
- Wet material, containing 220% moisture (dry basis), is to be dried at a rate of 1.5 kg/s in a continuous dryer to give a product containing 10% (dry basis).
- Moisture removed in kg/hr is unknown.
- Copra enters a dryer containing 70% moisture and leaves 7% moisture.
- Moisture removed on each pound of solid in the final product is unknown.
Forces and Pressures
- A 1 m x 1.5 m cylindrical tank is full of oil with SG = 0.92.
- The force acting at the bottom of the tank in dynes is unknown.
- Pressure at the 100-fathom depth of water in kPa is unknown.
Mass and Volume
- The mass of 10 quartz of water is unknown.
- The mass of carbon dioxide having a pressure of 20 psia at 200°F with 10 ft3 volume is unknown.
Heat and Enthalpy
- The heat needed to raise the temperature of water from 30°C to 100°C with 60% quality is unknown.
- The enthalpy of water at 212°F and 14.7 psi if the dryness factor is 30% is unknown.
Studying That Suits You
Use AI to generate personalized quizzes and flashcards to suit your learning preferences.