Nomad Wings Extreme

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson
Download our mobile app to listen on the go
Get App

Questions and Answers

What should be used to secure the cables near the antenna for outdoor setups?

  • Plastic adhesive strips
  • Standard zip ties
  • UV-resistant cable ties (correct)
  • Metal clamps

What is the purpose of waterproofing the RF connectors?

  • To allow for better signal transmission
  • To enhance the appearance of the setup
  • To increase the strength of the connectors
  • To prevent moisture damage in outdoor installations (correct)

Which tool is recommended for cleaning the connectors before making a connection?

  • A dry cloth
  • Compressed air or isopropyl alcohol (correct)
  • Water and soap
  • A soft brush

What should the RSSI signal strength be in order to confirm a successful installation?

<p>Higher than -75dB (D)</p> Signup and view all the answers

What is the minimum separation required from the antenna to comply with RF exposure safety regulations?

<p>20 cm (D)</p> Signup and view all the answers

What feature of the Nomad Wings Extreme ensures effective performance across the entire 5G spectrum?

<p>2X data speeds (A)</p> Signup and view all the answers

What is the maximum cable length recommendation to minimize signal loss?

<p>As short as possible (D)</p> Signup and view all the answers

Which tool is NOT required for the installation of the Nomad Wings Extreme?

<p>Mallet (D)</p> Signup and view all the answers

How far must the antenna be kept away from electrical devices to avoid interference?

<p>24 inches (B)</p> Signup and view all the answers

For wall mounting the antenna, which of the following steps is NOT necessary?

<p>Drill two 5/16” holes (B)</p> Signup and view all the answers

Which mounting option should be used for outdoor installations on a vertical pole?

<p>Pole Mount (B)</p> Signup and view all the answers

What is the recommended diameter range of the pole for mounting the Nomad Wings Extreme?

<p>1.5 inches to 2.5 inches (B)</p> Signup and view all the answers

Which aspect of the Nomad Wings Extreme contributes to its discreet aesthetic?

<p>Minimalist design (A)</p> Signup and view all the answers

Flashcards

Nomad Wings Extreme Antenna

A high-performance 5G cellular antenna for enterprise environments, indoor or outdoor.

2X2 MIMO

A multiple-input and multiple-output antenna technology that increases data speeds.

5G spectrum

The range of radio frequencies used by 5G cellular networks (600 MHz to 6 GHz).

Omni-Directional Antenna

An antenna that transmits and receives signals in all directions evenly.

Signup and view all the flashcards

IP54 Rating

A standard indicating the antenna's protection against dust and water.

Signup and view all the flashcards

Signal Interference

Disturbances to a wireless signal, caused by nearby electrical devices.

Signup and view all the flashcards

Wall Mount Installation

Using a bracket to attach the antenna to a non-metallic wall.

Signup and view all the flashcards

Pole Mount Installation

Mounting the antenna to a vertical pole using V-bolt and saddle clamp.

Signup and view all the flashcards

Cable Tie Placement

Secure cables approximately 6 inches below the antenna using UV-resistant cable ties for outdoor installations.

Signup and view all the flashcards

Waterproof Connectors

Use electrical tape or heat-shrink tubing to waterproof RF connectors for outdoor use.

Signup and view all the flashcards

Connector Cleaning

Clean RF connectors with canned air or isopropyl alcohol to remove dust.

Signup and view all the flashcards

Antenna Cable Connections

Connect antenna cables to router terminals: CELL 1 to MAIN0, CELL 2 to AUX0/DIV.

Signup and view all the flashcards

RSSI Signal Strength

Use a cellular device's diagnostics to check for an RSSI signal strength higher than -75dB.

Signup and view all the flashcards

Study Notes

Nomad Wings Extreme Antenna Overview

  • High-performance 5G antenna, 2X2 MIMO, omni-directional, for indoor/outdoor enterprise use
  • Delivers 2X data speeds across 600 MHz to 6 GHz 5G spectrum
  • Ideal for boosting cellular coverage in retail, office, or outdoor spaces
  • Minimalist design, small footprint, high-capacity throughput
  • IP54-rated, wall or pole mountable
  • Includes low-loss cables for optimal performance and router optimization

Required Tools

  • Phillips Screwdriver
  • 5/16” Torque Wrench (5 in.-lb)
  • 7/32” Drill Bit
  • 7/16” Wrench
  • Loctite or 3M Red 271 Thread Locker

Mounting Options

  • Wall Mount: Indoor installations, use provided bracket and screws, secure to non-metallic wall
  • Pole Mount: Outdoor/pole installations, use V-bolt, saddle clamp, and hardware, pole diameter 1.5-2.5 inches

Placement Considerations

  • Omni-Directional: Proper mounting for maximum 360° horizontal coverage
  • Interference: Maintain 24 inches separation from electrical devices (lights, routers, AC units)
  • Signal Path Loss: Avoid obstructions (concrete walls, metal objects)
  • Cable Length: Use shortest possible cables to minimize signal loss; avoid sharp cable bends

Installation Steps (Pole Mount)

  • Choose location with clear line of sight to cellular tower
  • Attach mounting bracket to antenna
  • Mount antenna to pole using V-bolt and hardware, tighten nuts with 7/16" wrench

Installation Steps (Wall Mount)

  • Use stud finder for stable location
  • Drill two 7/32" holes, avoiding metal obstructions
  • Attach mounting bracket to antenna & fasten to wall with screws

Cable Routing

  • Route cables to router, avoid sharp bends
  • Secure cables approximately 6 inches below antenna (use UV-resistant cable ties outdoors)
  • Waterproof RF connectors (electrical tape or heat-shrink tubing for outdoors)

Cable Connection Instructions

  • Clean connectors with canned air or isopropyl alcohol
  • Connect cables to router terminals: CELL 1 to MAIN0, CELL 2 to AUX0/DIV

Commissioning & Testing

  • Ensure all coaxial cable connectors are secure and no sharp bends
  • Verify RSSI signal strength higher than -75dB
  • Ensure cellular connection supports required data rates

Safety Warnings

  • Maintain 20 cm minimum separation from antenna (RF exposure)
  • Avoid installation in windy conditions or near power lines
  • Contact Nomad Internet Support for inquiries/support ([email protected])

Studying That Suits You

Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

Quiz Team

More Like This

Nomad Wings Auto
13 questions

Nomad Wings Auto

TruthfulRocket2570 avatar
TruthfulRocket2570
Nomad Wings Lite
5 questions

Nomad Wings Lite

TruthfulRocket2570 avatar
TruthfulRocket2570
Nomad Wings
8 questions

Nomad Wings

TruthfulRocket2570 avatar
TruthfulRocket2570
Use Quizgecko on...
Browser
Browser