30 Questions
What does the word 'shall' indicate in the context of the national standard?
Mandatory requirements
What does the word 'should' imply in terms of requirements?
Optional recommendations
Which organization initiated the pursuance of the Philippine Agricultural Engineering Standard on Forage Chopper methods of test?
AMTEC
Based on the context provided, what do ISO 8909-1 and ISO 8909-2 relate to?
Vocabulary and specifications of forage harvesters
In the preparation of the standard, which document/publication was considered for Moisture Measurement related to Forages?
ASAE S358.1
What does the use of 'should' in a standard imply regarding recommendations?
'Should' recommends but doesn't exclude other possibilities
What does PAES 219:2004 specify?
Methods of test and inspection for power-driven forage chopper
Who plays a role in the selection of the forage chopper to be tested?
Manufacturer/dealer
What is the purpose of verifying the manufacturer's technical data and information?
To ensure compliance with performance standards
Which document provides a minimum list of field and laboratory test equipment and materials?
Annex A
Where are the methods of testing and inspection defined according to PAES 219:2004?
In the Performance Test Data Sheet
What is the focus of PAES 219:2004 standard?
Forage chopper performance testing
What should be done before the start of each test trial regarding fuel consumption?
The fuel tank should be filled to its capacity
How should the tank be kept when refilling after a test trial?
Horizontal
What should be used to measure electric energy consumption if an electric motor is used as the prime mover?
Power meter
How many samples should be randomly taken for measuring the conditions of test materials such as length of forage crop?
20 representative samples
When are samples collected from the output chute for analysis in the laboratory?
During each test trial
What represents the fuel consumption for the test according to the text?
The amount refueled using a graduated cylinder
What is the significance of setting an adjustment of components at minimum length?
To reduce wear and tear
What does the running-in period refer to in the context of the machine?
The preliminary operation period to stabilize the machine
What is the role of the representative of the manufacturer/dealer during testing?
To operate, adjust, and repair the machine
Why is it important for the manufacturer to submit specifications and other relevant information about the forage chopper?
To ensure compliance with regulations
What should be contained between the vertical planes parallel to the median plane of the machine?
All parts of the forage chopper projecting upwards
In what conditions should a forage chopper be tested?
As installed for normal operation
What is the purpose of using the other half (500g) of the one kilogram sample for reference purposes?
To conduct a second check in case of review
What type of method is used to determine moisture content?
Oven-dry method
What temperature is maintained while drying the sample in the oven?
103°C ± 1°C
What should be done after removing the samples from the oven during the moisture content determination process?
Place the moisture can plus sample in a desiccator to cool
How many representative samples should be selected for each test trial during moisture content determination?
Three
Where can one find the laboratory test data sheet to be used for analysis?
Annex D
Test your knowledge on forage chopper components, overall width distance, and prime mover types such as electric motors and internal combustion engines. Questions may cover adjustment settings, running-in period, and other related concepts.
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free