Podcast
Play an AI-generated podcast conversation about this lesson
Questions and Answers
What should be done after connecting the 1" flare hose to the vapor line of the tank?
What should be done after connecting the 1" flare hose to the vapor line of the tank?
- Depressurize the hose.
- Open the valve on the Flare System and the valve on the tank or vessel slowly. (correct)
- Monitor for vapor or liquid left in the hose.
- Close the valve on the vapor line of the tank and the flare system.
Why is it important to watch the pressure on the venting tank closely during flaring or venting?
Why is it important to watch the pressure on the venting tank closely during flaring or venting?
- To prevent leaks or vapors from escaping.
- To maintain a constant flow of vapors in the flare line.
- To avoid contaminating the tank with flare line debris.
- To ensure that the pressure does not drop below the desired level. (correct)
When should the flare hose be disconnected and cap lines placed?
When should the flare hose be disconnected and cap lines placed?
- Before venting or flaring to desired pressure.
- After connecting the flare hose to the vapor line of the tank.
- After depressurizing the hose.
- Once transfer into or pressuring of tank is finished. (correct)
What should be done to the hose after transferring into or pressuring of tank is finished?
What should be done to the hose after transferring into or pressuring of tank is finished?
Signup and view all the answers
