TB Apparatus C-2

They are not relieved from the responsibility of apparatus maintenance or inspection by the PMP.

They should be aware of special maintenance requirements and consult with Fleet Services Division for guidance.

They should familiarize themselves with the bulletin.

<p>It emphasizes the importance of seeking guidance from Fleet Services Division for maintenance.</p> Signup and view all the answers

<p>They are responsible for the condition and operation of apparatus under their control, and must be alert for any repairs or supplies needed.</p> Signup and view all the answers

<p>The company commander.</p> Signup and view all the answers

<p>Battery/air maintenance systems should be utilized while the apparatus is parked in quarters, and engine block heaters should be utilized while the apparatus is parked outside of quarters during cold weather.</p> Signup and view all the answers

<p>Spare apparatus and equipment must be given the same care and attention as regularly assigned apparatus and equipment.</p> Signup and view all the answers

<p>They should immediately notify the officer-on-duty.</p> Signup and view all the answers

<p>While the apparatus is parked in quarters</p> Signup and view all the answers

<p>While the apparatus is parked outside of quarters during cold weather</p> Signup and view all the answers

<p>Utilize battery/air maintenance systems while parked in quarters and utilize engine block heaters while parked outside of quarters during cold weather.</p> Signup and view all the answers

<p>To ensure proper and standardized maintenance procedures are followed</p> Signup and view all the answers

<p>They are responsible for overseeing and implementing the Preventive Maintenance Program (PMP) for the apparatus.</p> Signup and view all the answers

<p>They aid in ensuring the proper functioning and longevity of the apparatus in varying environmental conditions.</p> Signup and view all the answers

<p>Guide to Company Apparatus Care and Maintenance (RT-14)</p> Signup and view all the answers

<p>Consulting with Fleet Services Division and being guided by their instructions</p> Signup and view all the answers

<p>When repairs or supplies are needed for the apparatus under their control</p> Signup and view all the answers

<p>Fill fuel tank</p> Signup and view all the answers

<p>During tour, after extended periods of operation, or when necessary</p> Signup and view all the answers

<p>Fill the fuel tank</p> Signup and view all the answers

<p>After extended periods of operation, or when necessary during the tour</p> Signup and view all the answers

<p>Contributing to the maintenance of the apparatus</p> Signup and view all the answers

<p>fraying, mounting brackets, locking mechanism</p> Signup and view all the answers

<p>It serves as a guide for care and maintenance of company apparatus</p> Signup and view all the answers

<p>Check for the presence of fraying, mounting brackets, and the locking mechanism.</p> Signup and view all the answers

<p>When the temperature falls below 32°F (0°C) or as per the manufacturer's recommendations.</p> Signup and view all the answers

<p>It provides detailed guidelines for the care and maintenance of company apparatus, ensuring uniform and thorough maintenance practices.</p> Signup and view all the answers

<p>Check sirens, air horns, and lights for operability and secured mounting; look for obstructions in and/or over the air horn and siren speaker; clean warning light lenses.</p> Signup and view all the answers

<p>Sirens, air horns, and lights.</p> Signup and view all the answers

<p>Air horn and siren speaker.</p> Signup and view all the answers

<p>Clean warning light lenses.</p> Signup and view all the answers

<p>Check for operability, ensure they are mounted securely, ensure lenses are cleaned, and replace headlight bulbs when necessary.</p> Signup and view all the answers

<p>For all other bulbs requiring replacement.</p> Signup and view all the answers

<p>The lenses should be cleaned.</p> Signup and view all the answers

<p>Operating the motor at moderate speed until maximum pressure is attained, shutting the motor, operating the drain cable for each air tank to discharge water, and releasing the cable when dry air is discharged.</p> Signup and view all the answers

<p>It is important to discharge water from the air tanks to ensure dry air is discharged, especially during sub-freezing weather to prevent freezing and potential damage.</p> Signup and view all the answers

<p>If the lenses are not clean, the immediate action required is to clean the lenses of the response warning devices.</p> Signup and view all the answers

<p>The guide is significant as it provides instructions and guidelines for the care and maintenance of company apparatus, ensuring proper maintenance practices are followed.</p> Signup and view all the answers

<p>Clean the lenses of the response warning devices.</p> Signup and view all the answers

<p>They contribute to the maintenance of the apparatus.</p> Signup and view all the answers

<p>They must consult with Fleet Services Division and be guided by their instructions.</p> Signup and view all the answers

<p>They should be utilized when repairs or supplies are needed for the apparatus under their control.</p> Signup and view all the answers

<p>Purge air tanks by operating the motor at moderate speed until maximum pressure is attained, then shut the motor and operate the drain cable for each air tank to discharge water. Release the cable when dry air is discharged.</p> Signup and view all the answers

<p>Check for operability, ensure they are mounted securely, clean lenses, and replace headlight bulbs when necessary.</p> Signup and view all the answers

<p>Operability, secure mounting, obstructions in and/or over the air horn and siren speaker, and clean warning light lenses.</p> Signup and view all the answers

<p>When repairs or supplies are needed for the apparatus under their control.</p> Signup and view all the answers

<p>It provides essential guidance for the maintenance of company apparatus and ensures adherence to proper care protocols.</p> Signup and view all the answers

<p>Check for fraying, check mounting brackets, and check the locking mechanism.</p> Signup and view all the answers

<p>Prevents freezing and ensures proper functioning of the apparatus</p> Signup and view all the answers

<p>Inspect and secure mounting</p> Signup and view all the answers

<p>When the auto eject plug receptacles are utilized</p> Signup and view all the answers

<p>They contribute to the proper functioning and maintenance of the apparatus</p> Signup and view all the answers

<p>The specific steps are not listed in the given text</p> Signup and view all the answers

<p>Response warning devices</p> Signup and view all the answers

<p>To ensure the apparatus is in a safe and efficient operating condition</p> Signup and view all the answers

<p>It ensures proper care and maintenance of company apparatus</p> Signup and view all the answers

<p>Purge the air tanks</p> Signup and view all the answers

<p>Clean the lenses</p> Signup and view all the answers

<p>They are responsible for the condition and operation of the apparatus under their control, and must immediately notify the officer-on-duty of any repairs or supplies needed.</p> Signup and view all the answers

<p>The PMP does not relieve company officers and chauffeurs from the responsibility of apparatus maintenance or inspection.</p> Signup and view all the answers

<p>Company commanders should consult with Fleet Services Division and be guided by their instructions when some apparatus have special maintenance requirements in addition to those outlined in the bulletin.</p> Signup and view all the answers

<p>Department personnel are responsible for the condition and operation of apparatus equipped with battery/air maintenance systems and engine block heaters, and should be alert for any repairs or supplies needed for these systems.</p> Signup and view all the answers

<p>The lenses of response warning devices should be cleaned immediately after the 0900 and 1800 roll calls if they are found to be dirty.</p> Signup and view all the answers

<p>Company officers and chauffeurs should familiarize themselves with the care and maintenance bulletin to ensure safe and efficient operation of the apparatus.</p> Signup and view all the answers

<p>1 lb.</p> Signup and view all the answers

<p>When the engine is cool or after it has been shut down for at least 15 minutes.</p> Signup and view all the answers

<p>13.5 to 14.2 volts</p> Signup and view all the answers

<p>30 to 70 psi</p> Signup and view all the answers

<p>3/16 inch</p> Signup and view all the answers

<p>Greater than 5 psi</p> Signup and view all the answers

<p>10 lbs.</p> Signup and view all the answers

<p>When the engine is cool</p> Signup and view all the answers

<p>13.5 to 14.2 volts</p> Signup and view all the answers

<p>Operate motor at moderate speed until maximum pressure is attained. Shut motor. Operate the drain cable for each air tank to discharge water. Release the cable when dry air is discharged.</p> Signup and view all the answers

<p>Check for operability, ensure they are mounted securely, clean lenses, replace headlight bulbs when necessary.</p> Signup and view all the answers

<p>None specified</p> Signup and view all the answers

<p>The fan belt</p> Signup and view all the answers

<p>Tower Ladder Boom and Aerial Ladder</p> Signup and view all the answers

<p>Tower ladder baskets; Fleet Services</p> Signup and view all the answers

<p>All gates and valves, and strainers on suction inlets</p> Signup and view all the answers

<p>The pump</p> Signup and view all the answers

<p>Tower Ladder Emergency System and Aerial Emergency System</p> Signup and view all the answers

<p>Electric fuel pump primer indicator</p> Signup and view all the answers

<p>Hydraulic system for Tower Ladder and Aerial Ladder</p> Signup and view all the answers

<p>Aerial Ladder</p> Signup and view all the answers

<p>The turntable</p> Signup and view all the answers

<p>Transmission fluid</p> Signup and view all the answers

<p>The radiator</p> Signup and view all the answers

<p>Wipe down</p> Signup and view all the answers

<p>Consult and be guided by their instructions</p> Signup and view all the answers

<p>Maintenance of apparatus</p> Signup and view all the answers

<p>Inspection and secured mounting</p> Signup and view all the answers

<p>No more than 4 pounds</p> Signup and view all the answers

<p>To ensure safe and efficient operation of the apparatus</p> Signup and view all the answers

<p>At the end of each shift</p> Signup and view all the answers

<p>28 to 32 volts</p> Signup and view all the answers

<p>Windshield wipers, mirrors, and glass</p> Signup and view all the answers

<p>Apparatus maintenance</p> Signup and view all the answers

<p>Various components of the apparatus</p> Signup and view all the answers

<p>Cleaned and disinfected</p> Signup and view all the answers

<p>Check battery casing for cracks or leaks, check for corrosion at each cable and clean as needed, check for loose connections at each cable, and check the condition of the battery hold down mechanism.</p> Signup and view all the answers

<p>The fuel tank of the apparatus should be checked and filled after extended periods of operation.</p> Signup and view all the answers

<p>Company officers and chauffeurs must ensure the safe and efficient operation of the apparatus.</p> Signup and view all the answers

<p>The response warning device lenses should be cleaned immediately after the roll calls.</p> Signup and view all the answers

<p>14.8 volts or higher</p> Signup and view all the answers

<p>700 to 800 rpm</p> Signup and view all the answers

<p>2 psi</p> Signup and view all the answers

<p>During sub-freezing weather</p> Signup and view all the answers

<p>12 volts or higher</p> Signup and view all the answers

<p>Immediate cleaning is required</p> Signup and view all the answers

<p>25 to 45 psi</p> Signup and view all the answers

<p>2 psi</p> Signup and view all the answers

<p>Maximum 1 lb.</p> Signup and view all the answers

<p>When a loss occurs over 10 lbs. per application</p> Signup and view all the answers

<p>Check if present, should read green</p> Signup and view all the answers

<p>To be utilized for the apparatus</p> Signup and view all the answers

<p>1 lb.</p> Signup and view all the answers

<p>Regarding bulb replacement and repairs</p> Signup and view all the answers

<p>Their responsibilities are not mentioned in the provided text.</p> Signup and view all the answers

<p>Battery</p> Signup and view all the answers

<p>10 lbs</p> Signup and view all the answers

<p>They ensure proper functioning in sub-freezing weather.</p> Signup and view all the answers

<p>It provides specific instructions for maintenance and inspections.</p> Signup and view all the answers

<p>To inspect the apparatus daily and report any defects.</p> Signup and view all the answers

<p>Cold or after the engine has been shutdown for at least 15 minutes</p> Signup and view all the answers

<p>The dipstick must be withdrawn, wiped clean, inserted all the way, withdrawn again for a true reading</p> Signup and view all the answers

<p>Between the 'Add' and 'Full' marks</p> Signup and view all the answers

<p>Do not check the oil level with the engine running</p> Signup and view all the answers

<p>Check it cold or after the engine has been shutdown for at least 15 minutes.</p> Signup and view all the answers

<p>They contribute to the maintenance of the apparatus by aiding in battery and air system maintenance as well as providing engine block heating.</p> Signup and view all the answers

<p>Non-response lights should be cleaned if the lenses are not clean after the 0900 and 1800 roll calls.</p> Signup and view all the answers

<p>The air system should be engaged momentarily to ensure it is functioning, as running it dry will cause damage.</p> Signup and view all the answers

<p>Withdraw and wipe clean the dipstick, then insert all the way and withdraw again for a true reading. Ensure the oil level is between the 'Add' and 'Full' marks on the dipstick.</p> Signup and view all the answers

<p>No more than 3 psi.</p> Signup and view all the answers

<ol> <li>Drain the air tanks daily and check the operation of the moisture ejector. 2. Ensure that the air tanks are drained completely. 3. Continue to drain the tanks until only air is heard escaping.</li> </ol> Signup and view all the answers

<p>After each extended period of operation and before returning to quarters.</p> Signup and view all the answers

<p>25 to 45 psi</p> Signup and view all the answers

<p>4 psi</p> Signup and view all the answers

<p>When the apparatus is parked inside station quarters for extended periods</p> Signup and view all the answers

<p>4/32 inch</p> Signup and view all the answers

<p>Add and Full marks</p> Signup and view all the answers

<p>2 psi</p> Signup and view all the answers

<p>They should be cleaned immediately</p> Signup and view all the answers

<p>During extended periods of inactivity or sub-freezing weather</p> Signup and view all the answers

<p>2 psi</p> Signup and view all the answers

<p>Minimum and maximum marks</p> Signup and view all the answers

<p>During sub-freezing weather</p> Signup and view all the answers

<p>35 to 45 psi</p> Signup and view all the answers

<p>Be guided by the Fluid Placard Chart on the inside of the chauffeur's door</p> Signup and view all the answers

<p>After extended periods of operation</p> Signup and view all the answers

<p>As indicated on the dipstick</p> Signup and view all the answers

<p>The engine oil level; the appropriate personnel</p> Signup and view all the answers

<p>Greater than 5 psi</p> Signup and view all the answers

<p>30 to 70 psi</p> Signup and view all the answers

<p>On apparatus equipped with battery/air maintenance systems and engine block heaters</p> Signup and view all the answers

<p>The voltmeter should show a reading of 13.5 to 14.2 volts</p> Signup and view all the answers

<p>30 to 70 psi</p> Signup and view all the answers

<p>3 psi</p> Signup and view all the answers

<p>10 to 15 psi</p> Signup and view all the answers

<p>Greater than 14.2 volts</p> Signup and view all the answers

<p>Greater than 5 psi</p> Signup and view all the answers

<p>After extended periods of operation</p> Signup and view all the answers

<p>Not specified</p> Signup and view all the answers

<p>Not specified</p> Signup and view all the answers

<p>Wheel-Checks are a loose wheel nut indicator that can identify a loose wheel nut with a simple visual inspection.</p> Signup and view all the answers

<p>Defects, partial loss of air pressure, and flats are not easily detectable on tires on dual wheels.</p> Signup and view all the answers

<p>Checking for indications of the rim having rotated in relation to the spokes on open rim wheels is important to ensure wheel safety and integrity.</p> Signup and view all the answers

<p>The tread wear depth of 3/16 inch is the recommended threshold for tire replacement.</p> Signup and view all the answers

<p>Between the 'Add' and 'Full' marks on the dipstick</p> Signup and view all the answers

<p>To ensure proper maintenance and care of company apparatus</p> Signup and view all the answers

<p>3 psi</p> Signup and view all the answers

<p>Over 14.2 volts</p> Signup and view all the answers

<p>Defects, partial loss of air pressure, and flats are difficult to detect in tires on dual wheels because they are hidden from view and can be obscured by the adjacent tire.</p> Signup and view all the answers

<p>The depth of tread wear on the tires should be 4/32 of an inch before requesting replacement.</p> Signup and view all the answers

<p>The auto eject plug receptacles should be utilized when the apparatus is parked indoors or in a protected environment.</p> Signup and view all the answers

<p>The recommended oil pressure reading when the engine is operating between 1500 to 2100 rpm should be 35 to 60 psi.</p> Signup and view all the answers

<p>Not easily detectable</p> Signup and view all the answers

<p>Ensure adherence and implementation</p> Signup and view all the answers

<p>2 psi</p> Signup and view all the answers

<p>When the battery is being charged</p> Signup and view all the answers

<p>Special attention should be paid to tires on dual wheels because defects, partial loss of air pressure, and flats are difficult to detect due to the proximity of the tires and the lack of visibility.</p> Signup and view all the answers

<p>Battery/air maintenance systems and engine block heaters play a crucial role in maintaining the battery's charge and ensuring the engine starts in cold weather.</p> Signup and view all the answers

<p>After the 0900 and 1800 roll calls, immediate action is required to clean the lenses of non-response lights if they are dirty or obstructed.</p> Signup and view all the answers

<p>The recommended oil level indicated on the dipstick should be between the 'Add' and 'Full' marks.</p> Signup and view all the answers

<p>Identify a loose wheel nut</p> Signup and view all the answers

<p>2 psi</p> Signup and view all the answers

<p>10 psi</p> Signup and view all the answers

<p>During cold weather</p> Signup and view all the answers

<p>To help identify a loose wheel nut</p> Signup and view all the answers

<p>2 psi</p> Signup and view all the answers

<p>4/32 of an inch</p> Signup and view all the answers

<p>Regularly checking the battery charge (voltmeter) with the engine running and reading the Guide to Company Apparatus Care and Maintenance (RT-14)</p> Signup and view all the answers

<p>Notify the Officer on duty</p> Signup and view all the answers

<p>Inspect and clean the lenses</p> Signup and view all the answers

<p>1 psi</p> Signup and view all the answers

<p>13.5 to 14.2 volts</p> Signup and view all the answers

<p>Notify the Officer on duty</p> Signup and view all the answers

<p>30-60 psi</p> Signup and view all the answers

<p>2 psi</p> Signup and view all the answers

<p>The same level of care and attention as the regular apparatus and equipment.</p> Signup and view all the answers

<p>Leaf springs</p> Signup and view all the answers

<p>During sub-freezing weather</p> Signup and view all the answers

<p>As low as possible</p> Signup and view all the answers

<p>Clean the lenses immediately</p> Signup and view all the answers

<p>Tools must not come loose or come in contact with electrical unit located under the seat.</p> Signup and view all the answers

<p>Behind the rearward facing seat of the crew cab on the chauffeur's side.</p> Signup and view all the answers

<p>10 psi</p> Signup and view all the answers

<p>4/32 inch</p> Signup and view all the answers

<p>No more than 4 psi</p> Signup and view all the answers

<p>Leaf springs, torque rods, and shock absorbers</p> Signup and view all the answers

<p>Over 16 volts</p> Signup and view all the answers

<p>To detect any wheel movement or loosening</p> Signup and view all the answers

<p>Precautions or provisions must be made so that these tools do not come loose, or come in contact with electrical unit located under seat.</p> Signup and view all the answers

<p>Units are not to store tools or equipment behind the rearward facing seat of the crew cab on the chauffeur's side.</p> Signup and view all the answers

<p>Check the fuel tank for tightness, and it must be free from oil and grease, with no cuts or visible wear.</p> Signup and view all the answers

<p>Company officers and chauffeurs should follow the guidelines in the Guide to Company Apparatus Care and Maintenance (RT-14) to ensure safe and efficient operation of the apparatus.</p> Signup and view all the answers

<p>Ensure that the tools do not come loose or come in contact with the electrical unit located under the seat.</p> Signup and view all the answers

<p>The recommended oil pressure reading is typically 10 psi for every 1000 rpm.</p> Signup and view all the answers

<p>Special attention is required due to the challenges in detecting defects, partial loss of air pressure, and flats in tires on dual wheels.</p> Signup and view all the answers

<p>The PMP is significant for ensuring the proper maintenance and functioning of company apparatus.</p> Signup and view all the answers

<p>Radiator level; maintenance division</p> Signup and view all the answers

<p>30 to 60 psi</p> Signup and view all the answers

<p>Auto eject plug receptacles</p> Signup and view all the answers

<p>Tools stored under the chauffeur's seat</p> Signup and view all the answers

<p>On-board compressor and battery charger</p> Signup and view all the answers

<p>To check and fill the fuel tank</p> Signup and view all the answers

<p>To ensure proper maintenance and safety</p> Signup and view all the answers

<p>Air maintenance systems and engine block heaters</p> Signup and view all the answers

<p>One inch below the radiator cap or to the full mark on the surge tank</p> Signup and view all the answers

<p>220º F</p> Signup and view all the answers

<p>The fan belt</p> Signup and view all the answers

<p>Radiator, engine block, or hose connections</p> Signup and view all the answers

<p>about one inch below the radiator cap or to the full mark on the surge tank</p> Signup and view all the answers

<p>Not applicable</p> Signup and view all the answers

<p>under the chauffeur's seat</p> Signup and view all the answers

<p>response warning devices</p> Signup and view all the answers

<p>One inch below the radiator cap or to the full mark on the surge tank</p> Signup and view all the answers

<p>Recommended maximum air loss in the brake system per 10 minutes during sub-freezing weather</p> Signup and view all the answers

<p>Battery/air maintenance systems and engine block heaters play a specific role in the maintenance of the apparatus</p> Signup and view all the answers

<p>Auto eject plug receptacles should be utilized on apparatus equipped with battery/air maintenance systems and engine block heaters</p> Signup and view all the answers

<p>Zero</p> Signup and view all the answers

<p>Higher than 14.2 volts</p> Signup and view all the answers

<p>Between 10 and 25 psi</p> Signup and view all the answers

<p>They help with cold-weather starting and battery maintenance</p> Signup and view all the answers

<p>The recommended maximum air loss in the brake system per 10 minutes during sub-freezing weather should be 1 psi.</p> Signup and view all the answers

<p>The auto eject plug receptacles should be utilized when the apparatus equipped with battery/air maintenance systems and engine block heaters is not in use for a period of time.</p> Signup and view all the answers

<p>The Guide to Company Apparatus Care and Maintenance (RT-14) provides important guidelines and procedures for the care and maintenance of company apparatus.</p> Signup and view all the answers

<p>Battery/air maintenance systems and engine block heaters contribute to maintaining the proper functioning and condition of the apparatus, especially during periods of inactivity or sub-freezing weather.</p> Signup and view all the answers

<p>Compression and tension bolts</p> Signup and view all the answers

<p>4 psi</p> Signup and view all the answers

<p>They should be cleaned immediately</p> Signup and view all the answers

<p>Over 15 volts</p> Signup and view all the answers

<p>The hydraulic lines</p> Signup and view all the answers

<p>Check when the engine is cool</p> Signup and view all the answers

<p>As needed</p> Signup and view all the answers

<p>As needed</p> Signup and view all the answers

<p>Cracks and/or missing parts</p> Signup and view all the answers

<p>2 psi</p> Signup and view all the answers

<p>When bulbs are found to be inoperative</p> Signup and view all the answers

<p>It provides guidance for the maintenance of apparatus</p> Signup and view all the answers

<p>2 psi</p> Signup and view all the answers

<p>1 inch below the filler neck</p> Signup and view all the answers

<p>10 psi</p> Signup and view all the answers

<p>In temperatures below 32°F</p> Signup and view all the answers

<p>The engine oil level should be checked by removing the dipstick, wiping it clean, reinserting it, then removing it to check the oil level.</p> Signup and view all the answers

<p>Battery/air maintenance systems and engine block heaters help maintain the battery charge, air pressure, and ensure easier starting in cold weather.</p> Signup and view all the answers

<p>The pump should be engaged for a maximum of 30 seconds to check its functioning.</p> Signup and view all the answers

<p>The air pressure in the air tanks should remain relatively level, and excessive drift downward should be notified to the appropriate personnel.</p> Signup and view all the answers

<p>3/16 inch</p> Signup and view all the answers

<p>Clean the lenses</p> Signup and view all the answers

<p>During sub-freezing weather</p> Signup and view all the answers

<p>Ensuring safety and efficiency</p> Signup and view all the answers

<p>Operate all gates and valves with the engine shut down, momentarily engage pump with engine running, and check all pump indicator lights.</p> Signup and view all the answers

<p>The recommended level of anti-freeze in the radiator when the engine is cool is to visually check for cracks and/or missing parts during the suspension inspection.</p> Signup and view all the answers

<p>The immediate action to be taken regarding response warning devices after the 0900 and 1800 roll calls, if the lenses are not clean, is to check gauges on the pump panel against corresponding gauges in the cab to verify their accuracy.</p> Signup and view all the answers

<p>Strainers on suction inlets should be tested for a maximum of 30 seconds, with their fluid level checked and proper fluid added as necessary.</p> Signup and view all the answers

<p>The lenses for cleanliness</p> Signup and view all the answers

<p>Cleaning the lenses</p> Signup and view all the answers

<p>Checking for obstructions preventing proper air circulation through the core</p> Signup and view all the answers

<p>Over 14 volts</p> Signup and view all the answers

<p>They should be checked for operating efficiency.</p> Signup and view all the answers

<p>The recommended maximum air loss is not specified in the given text.</p> Signup and view all the answers

<p>It signifies the importance of company commanders seeking guidance from Fleet Services Division.</p> Signup and view all the answers

<p>Wheel-Checks are indicators used to identify a loose wheel nut by showing movement or a change in position.</p> Signup and view all the answers

<p>Gauges on the pump panel</p> Signup and view all the answers

<p>When the apparatus is parked in quarters</p> Signup and view all the answers

<p>Oil level</p> Signup and view all the answers

<p>Clean the lenses</p> Signup and view all the answers

<p>Gauges on the pump panel</p> Signup and view all the answers

<p>The chauffeur should take action</p> Signup and view all the answers

<p>13.5 to 14.2 volts</p> Signup and view all the answers

<p>The pump should remain relatively level; the appropriate personnel should be notified</p> Signup and view all the answers

<p>No more than 4 psi</p> Signup and view all the answers

<p>They aid in maintaining battery charge and keeping the engine warm in cold weather.</p> Signup and view all the answers

<p>It emphasizes the importance of collaboration and adherence to the instructions provided by the Fleet Services Division for effective maintenance.</p> Signup and view all the answers

<p>Immediate cleaning of the lenses if they are not clean.</p> Signup and view all the answers

<p>Damage to the pump</p> Signup and view all the answers

<p>When the engine is cool</p> Signup and view all the answers

<p>Recommended reading for battery charge</p> Signup and view all the answers

<p>Oil level on the dipstick; Company officers</p> Signup and view all the answers

<p>Fluid Placard Chart on the inside of the chauffeur's door</p> Signup and view all the answers

<p>oilless</p> Signup and view all the answers

<p>vent hole</p> Signup and view all the answers

<p>a guide for the care and maintenance of company apparatus</p> Signup and view all the answers

<p>Fluid Placard Chart on the inside of the chauffeur's door</p> Signup and view all the answers

<p>Primer pump oil</p> Signup and view all the answers

<p>Refer to the Fluid Placard Chart on the inside of the chauffeur's door</p> Signup and view all the answers

<p>Adhere to the Guide to Company Apparatus Care and Maintenance (RT-14)</p> Signup and view all the answers

<p>4/32 of an inch</p> Signup and view all the answers

<p>20 to 45 psi</p> Signup and view all the answers

<p>Obstructions</p> Signup and view all the answers

<p>They contribute to ensuring the safety and efficiency of apparatus operation.</p> Signup and view all the answers

<p>Department personnel are responsible for utilizing the auto eject plug receptacles on apparatus equipped with battery/air maintenance systems and engine block heaters.</p> Signup and view all the answers

<p>The fuel tank should be visually checked for damage and the fuel cap should be secured tightly.</p> Signup and view all the answers

<p>The voltmeter should show a reading above 15 volts when the battery is over-charging.</p> Signup and view all the answers

<p>After the roll calls, the seat belts should be checked for damage and proper functioning.</p> Signup and view all the answers

<p>Condition of safety belts installed in basket.</p> Signup and view all the answers

<p>Boom cradle.</p> Signup and view all the answers

<p>Tower ladder baskets; Fleet Services.</p> Signup and view all the answers

<p>They help in maintaining the apparatus.</p> Signup and view all the answers

<p>Electrical outlets and lights at basket.</p> Signup and view all the answers

<p>In the crew cab.</p> Signup and view all the answers

<p>Steel rod held in place by a spring clip or nut</p> Signup and view all the answers

<p>Tower ladder baskets; Fleet Services</p> Signup and view all the answers

<p>Leveling pistons</p> Signup and view all the answers

<p>Hydraulic lines to the main reservoir</p> Signup and view all the answers

<p>Electrical outlets and lights</p> Signup and view all the answers

<p>Boom cradle</p> Signup and view all the answers

<p>Pedestal and basket railings, basket gates, and locks</p> Signup and view all the answers

<p>40 to 60 psi</p> Signup and view all the answers

<p>Guide to Company Apparatus Care and Maintenance (RT-14)</p> Signup and view all the answers

<p>3 inches below the filler neck</p> Signup and view all the answers

<p>Base of basket riser, pistons at base of boom and at basket level, jacks, outriggers, and turntable</p> Signup and view all the answers

<p>Springs, shock absorbers, u-bolts, and spring and shackle brackets</p> Signup and view all the answers

<p>Fuel tank should be visually checked for leaks and the fuel level should be noted</p> Signup and view all the answers

<p>3 psi</p> Signup and view all the answers

<p>The recommended maximum air loss in the brake system per 10 minutes during sub-freezing weather should be minimal, ideally zero.</p> Signup and view all the answers

<p>Battery/air maintenance systems and engine block heaters help in ensuring the proper functioning and readiness of the apparatus in varying weather conditions, especially during cold weather.</p> Signup and view all the answers

<p>The voltmeter should show a reading of 13.5 to 14.2 volts when the battery is charging.</p> Signup and view all the answers

<p>The strainers on suction inlets should be periodically checked and cleaned to ensure proper functioning.</p> Signup and view all the answers

<p>Outlets and lights</p> Signup and view all the answers

<p>2 psi</p> Signup and view all the answers

<p>Cracks and/or missing parts</p> Signup and view all the answers

<p>Over 15 volts</p> Signup and view all the answers

<p>the primer pump</p> Signup and view all the answers

<p>over 15.5 volts</p> Signup and view all the answers

<p>3 psi</p> Signup and view all the answers

<p>They are indicators to show if a wheel nut has loosened</p> Signup and view all the answers

<p>brass bushings</p> Signup and view all the answers

<p>leveling pistons</p> Signup and view all the answers

<p>not specified</p> Signup and view all the answers

<p>not specified</p> Signup and view all the answers

<p>Visual check for cuts, leaks, or signs of failure</p> Signup and view all the answers

<p>After the completion of the 0900 and 1800 roll calls</p> Signup and view all the answers

<p>28 to 32 volts</p> Signup and view all the answers

<p>It provides guidance for company commanders in consultation with Fleet Services Division</p> Signup and view all the answers

<p>Boom cradle</p> Signup and view all the answers

<p>Clean lenses, replace lenses if necessary</p> Signup and view all the answers

<p>2 psi</p> Signup and view all the answers

<p>Voltmeter should show over 15 volts</p> Signup and view all the answers

<p>Cracks and/or missing parts in the suspension</p> Signup and view all the answers

<p>Utilization and maintenance of battery/air maintenance systems and engine block heaters</p> Signup and view all the answers

<p>Level of anti-freeze in the radiator; Notify the appropriate supervisor or mechanic</p> Signup and view all the answers

<p>Clean the lenses immediately</p> Signup and view all the answers

<p>Steel rod held in place by a spring clip or nut</p> Signup and view all the answers

<p>Suspension</p> Signup and view all the answers

<p>As per the text, the maximum air loss should be $3 psi$ per 10 minutes during sub-freezing weather.</p> Signup and view all the answers

<p>As per the text, the recommended tread wear depth on tires before requesting replacement is 4/32 inch.</p> Signup and view all the answers

<p>The six skid plate bolts located at the end of each boom section on both sides of the boom.</p> Signup and view all the answers

<p>The recommended tread wear depth is important to monitor, and it is 4/32 inches.</p> Signup and view all the answers

<p>The immediate action should be taken to clean the lenses of the response warning devices.</p> Signup and view all the answers

<p>The voltmeter should show a reading between 13.8 and 14.4 volts when the battery is charging.</p> Signup and view all the answers

<p>Check for missing or sheared bolts, and perform a hand check for tightness of accessible bolts.</p> Signup and view all the answers

<p>The recommended maximum air loss in the brake system per 10 minutes during sub-freezing weather is 2 psi.</p> Signup and view all the answers

<p>Components such as the ladder, ladder sections, and the turntable should be inspected for looseness, wear, or defective welds and/or cracks.</p> Signup and view all the answers

<p>They play a role in maintaining the battery/air systems and keeping the engine block warm in cold weather.</p> Signup and view all the answers

<p>Tools or equipment carried in bed</p> Signup and view all the answers

<p>Maximum air loss in the brake system per 10 minutes</p> Signup and view all the answers

<p>Battery/air maintenance systems and engine block heaters</p> Signup and view all the answers

<p>Voltmeter showing when the battery is over-charging</p> Signup and view all the answers

<p>Obstructions which may prevent proper air circulation through the core</p> Signup and view all the answers

<p>When repairs or supplies are needed for the apparatus</p> Signup and view all the answers

<p>Above 28 volts</p> Signup and view all the answers

<p>They are indicators to detect overheating caused by friction and they help identify a loose wheel nut by changing color.</p> Signup and view all the answers

<p>Inspect ladder for damage (rails and rungs), check ladder slide wear blocks, and visually check hydraulic lines to the main reservoir for cuts, leaks, or possible signs of failure.</p> Signup and view all the answers

<p>The lenses should be cleaned, and if they remain dirty, they should be reported to the appropriate personnel.</p> Signup and view all the answers

<p>The recommended maximum air loss in the brake system per 10 minutes during sub-freezing weather is 3 psi.</p> Signup and view all the answers

<p>Department personnel are responsible for ensuring the safe and efficient operation of battery/air maintenance systems and engine block heaters, including monitoring, maintenance, and utilization as required.</p> Signup and view all the answers

<p>1 psi</p> Signup and view all the answers