project 2 - 7 storey apartment building

what would be the thickness and kind glass would you use of its shower enclosure

what would be the best economical but appropriate lighting for this project

what would be the best and cost effective material for toilet

what is the button part of an elevator which is used to request elevator when pushed

the putty or sealant compound uses to connect a glass is ____________

what is the minumum width of the common hallway, in meters

select the appropriate and cost-effective paint for the ceiling at the lobby

what is the nearest allowable maximum building footprint of the project rounded off to the nearest square meters

what is the minimum width of the common stair at the ground floor in nearest meters

what is the approximate length in meters of the car parking

an artificial stone made up of mixing cement, aggregates and water is _______ concrete

what is the most common type of cement that is in general use

which cement type has low hardening characteristics

crushed stones, crushed gravel or natural gravel with particles retained on a 5mm sieve is a _________ aggregate

a closed loop of reinforcement bars that is used to hold the mail reinforcement bars of beam is called a

a closed loop of reinforced cement bars that is used to hold the mail reinforcement bars in columns is called a

a composite material in which concretes relatively low tensile strength and ductility are counteracted by the inclusion of reinforcement having higher tensile strength and or ductility is a ______________

a composite material in which concretes relatively low tensile strength and ductility are counteracted by the inclusion of reinforcement having higher tensile strength and or ductility is a __________

which is NOT a raw material for rebar spacer

what is NOT considered a temporary facility needed during construction

which part of the building elements is considered not part of architectural design drawings

a graphic horizontals section looking up instead of down as normal drawing

in what architectural design service phase does an architect renders the initial line drawings representing design studies leading to a recommended design solution including the general description of the project

the general term for precast materials that are fastened to a metal frame and carry no load is a _________ walls

what type of window designs that may be introduced on this project that will provide more space