Fiber Optic Circuitry Introduction
10 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

Why are optical fiber links replacing co-axial trunks between telephone exchanges?

  • To reduce the number of repeaters required
  • Because of low maintenance cost
  • Due to low attenuation and high transmission bandwidth (correct)
  • Because of ease of installation
  • What is the advantage of using optical waveguide in urban broadband service networks?

  • It requires more repeaters
  • It is more costly than co-axial cable
  • It provides a higher transmission bandwidth (correct)
  • It provides a lower transmission bandwidth
  • What is the function of Q1 in the fiber optic transmitter circuit?

  • To amplify the signal
  • To convert the electrical signal to an optical signal
  • To receive the sound signal
  • To bias a transistor (correct)
  • What is the function of MIC1 in the fiber optic transmitter circuit?

    <p>To receive the sound signal (D)</p> Signup and view all the answers

    Why is Q2 used in the fiber optic transmitter circuit?

    <p>To amplify the signal further (D)</p> Signup and view all the answers

    What is the advantage of using NE555 in the fiber optic transmitter circuit?

    <p>It is low-cost and has a fairly good performance efficiency (A)</p> Signup and view all the answers

    What is the purpose of C1 in the fiber optic transmitter circuit?

    <p>To pass a fluctuating signal to bias a transistor (D)</p> Signup and view all the answers

    What is the function of the transmitter circuit in fiber optic transmission?

    <p>To transmit the signal (D)</p> Signup and view all the answers

    What is the advantage of using optical fiber links over co-axial trunks?

    <p>Higher transmission bandwidth and lower attenuation (A)</p> Signup and view all the answers

    What is the purpose of using repeaters in fiber optic transmission?

    <p>To amplify the signal (D)</p> Signup and view all the answers

    More Like This

    Optical Fiber and Multimode Fiber Quiz
    10 questions
    Optical Fiber Basics
    10 questions

    Optical Fiber Basics

    QualifiedGulf5196 avatar
    QualifiedGulf5196
    Fiber Optic Circuitry Introduction
    10 questions
    Use Quizgecko on...
    Browser
    Browser