Podcast
Questions and Answers
Mark each equipment item with the proper ______________ and _____________.
Mark each equipment item with the proper ______________ and _____________.
weight, center of balance
Prior to weighing a vehicle, ____________________________ before weighing the axle/axles.
Prior to weighing a vehicle, ____________________________ before weighing the axle/axles.
the driver and/or passengers must be out of the vehicle
Where on a pallet should you ensure its scale weight is clearly marked?
Where on a pallet should you ensure its scale weight is clearly marked?
clearly marked on one 88-inch side and one 108-inch side of the pallet
Married pallets do not require center of balance marking.
Married pallets do not require center of balance marking.
The DD Form 2775 can contain classified information only if approved by the installation commander.
The DD Form 2775 can contain classified information only if approved by the installation commander.
When marking the center of balance on a vehicle, the vertical portion of the 'T' will contain ______________.
When marking the center of balance on a vehicle, the vertical portion of the 'T' will contain ______________.
Do not leave vehicles on the cargo floor unattended until a minimum of ________ forward and ________ aft restraint devices are installed.
Do not leave vehicles on the cargo floor unattended until a minimum of ________ forward and ________ aft restraint devices are installed.
Due to taxiing aircraft and material handling equipment (MHE) movement on the flightline, which of the following should be escorted to and from aircraft?
Due to taxiing aircraft and material handling equipment (MHE) movement on the flightline, which of the following should be escorted to and from aircraft?
What is the maximum speed limit when within 25 feet of an aircraft?
What is the maximum speed limit when within 25 feet of an aircraft?
The deploying unit is responsible for the activities conducted within the marshaling area.
The deploying unit is responsible for the activities conducted within the marshaling area.
Which of the following are responsible for activities conducted within the Call Forward Area?
Which of the following are responsible for activities conducted within the Call Forward Area?
Which of the following are specific deploying unit responsibilities within the AHA?
Which of the following are specific deploying unit responsibilities within the AHA?
The Alert Holding Area (AHA) is the vehicle, equipment, supply, and personnel control area, under the control of the A/DACG.
The Alert Holding Area (AHA) is the vehicle, equipment, supply, and personnel control area, under the control of the A/DACG.
Container keys must be available during which of the following?
Container keys must be available during which of the following?
Vehicle drivers will not back a vehicle toward or into an aircraft until spotter personnel are in place and directed by a guide.
Vehicle drivers will not back a vehicle toward or into an aircraft until spotter personnel are in place and directed by a guide.
What is the fuel limit in vehicles loaded on the KC-10 and KC-135 aircraft?
What is the fuel limit in vehicles loaded on the KC-10 and KC-135 aircraft?
Fuel or brake system leaks, no matter how minor, will prevent air shipment.
Fuel or brake system leaks, no matter how minor, will prevent air shipment.
___________________ is defined as the orderly assembly, organization, and the movement of personnel and equipment from the unit to the aircraft.
___________________ is defined as the orderly assembly, organization, and the movement of personnel and equipment from the unit to the aircraft.
When conducting an ERO operation with a C-5 aircraft, vehicles and personnel exiting via the forward or aft ramp will proceed on a direct line with the fuselage at least _____ feet before turning, or at least _______ feet before stopping.
When conducting an ERO operation with a C-5 aircraft, vehicles and personnel exiting via the forward or aft ramp will proceed on a direct line with the fuselage at least _____ feet before turning, or at least _______ feet before stopping.
The Circle of Safety extends __________ feet from the aircraft nose, tail and wing tips.
The Circle of Safety extends __________ feet from the aircraft nose, tail and wing tips.
When computing the center of balance of wheeled items, always round decimal to the nearest whole number.
When computing the center of balance of wheeled items, always round decimal to the nearest whole number.
A moment is a product of ______________ the weight and distance.
A moment is a product of ______________ the weight and distance.
In the call forward area, cargo and equipment loads must be available for joint inspection (JI) _______ hours prior to departure; and personnel must be available for passenger briefings and manifest checks ________ hours prior to departure.
In the call forward area, cargo and equipment loads must be available for joint inspection (JI) _______ hours prior to departure; and personnel must be available for passenger briefings and manifest checks ________ hours prior to departure.
______________ issues cargo airlift certifications.
______________ issues cargo airlift certifications.
A _____________ will be pre-positioned to prevent a vehicle from striking an aircraft.
A _____________ will be pre-positioned to prevent a vehicle from striking an aircraft.
In which phase of the Departure Airfield Operations is the Joint Inspection conducted and discrepancies corrected?
In which phase of the Departure Airfield Operations is the Joint Inspection conducted and discrepancies corrected?
When you park a vehicle near an aircraft, you should:
When you park a vehicle near an aircraft, you should:
If proper clearance can be determined, vehicles can be driven between the wing tips of two aircraft.
If proper clearance can be determined, vehicles can be driven between the wing tips of two aircraft.
_________________ is responsible for certifying ammunition, explosives and other hazardous materials for movement on DoD owned and controlled aircraft.
_________________ is responsible for certifying ammunition, explosives and other hazardous materials for movement on DoD owned and controlled aircraft.
When marking the center of balance on a vehicle, what information will be shown on the horizontal portion of the 'T'?
When marking the center of balance on a vehicle, what information will be shown on the horizontal portion of the 'T'?
Which of the following cargo items require you to mark CB?
Which of the following cargo items require you to mark CB?
Flashcards
Proper Marking
Proper Marking
Mark equipment with weight and center of balance.
Weighing Vehicles
Weighing Vehicles
Exit the vehicle before weighing to get accurate readings.
Pallet Scale Marking
Pallet Scale Marking
Weight must be visible on 88-inch and 108-inch sides.
Married Pallet COB
Married Pallet COB
Signup and view all the flashcards
Classified Info Approval
Classified Info Approval
Signup and view all the flashcards
"T" Marking on Vehicle
"T" Marking on Vehicle
Signup and view all the flashcards
Vehicle Restraints
Vehicle Restraints
Signup and view all the flashcards
Troop Escort
Troop Escort
Signup and view all the flashcards
<25ft Speed Limit
<25ft Speed Limit
Signup and view all the flashcards
Marshaling Area Accountability
Marshaling Area Accountability
Signup and view all the flashcards
Call Forward Area
Call Forward Area
Signup and view all the flashcards
Alert Holding Area (AHA)
Alert Holding Area (AHA)
Signup and view all the flashcards
Container Key Access
Container Key Access
Signup and view all the flashcards
Vehicle Spotters
Vehicle Spotters
Signup and view all the flashcards
Fuel Limit
Fuel Limit
Signup and view all the flashcards
Prohibited Leaks
Prohibited Leaks
Signup and view all the flashcards
Marshalling
Marshalling
Signup and view all the flashcards
ERO Movement
ERO Movement
Signup and view all the flashcards
Circle of Safety
Circle of Safety
Signup and view all the flashcards
COB Rounding
COB Rounding
Signup and view all the flashcards
Moment
Moment
Signup and view all the flashcards
Joint Inspection Timelines
Joint Inspection Timelines
Signup and view all the flashcards
Airlift Certification Authority
Airlift Certification Authority
Signup and view all the flashcards
Wheel Chocks
Wheel Chocks
Signup and view all the flashcards
Ready Line
Ready Line
Signup and view all the flashcards
Parking Procedures
Parking Procedures
Signup and view all the flashcards
Clearance Check
Clearance Check
Signup and view all the flashcards
Commander Certification
Commander Certification
Signup and view all the flashcards
"T" Marking Horizontal
"T" Marking Horizontal
Signup and view all the flashcards
Vehicle CB Marking
Vehicle CB Marking
Signup and view all the flashcards
Study Notes
Equipment Preparation: Weighing and Marking
- Proper marking includes weight and center of balance (COB) on equipment items.
- Ensure the driver and passengers exit the vehicle before weighing the axle/axles.
- Pallet scale weight must be marked clearly on both an 88-inch side and a 108-inch side.
- Married pallets require center of balance markings; this statement is false.
- Classified information on DD Form 2775 requires installation commander approval; any unapproved information is false.
- The vertical part of the "T" marking on a vehicle includes the gross weight information.
Equipment Preparation: Safety
- Vehicles should not remain unattended on the cargo floor until at least one forward and one aft restraint device is installed.
- Troops and passengers need to be escorted when moving to and from aircraft due to movement in the flightline area.
- Maximum speed limit within 25 feet of an aircraft is 5 mph.
Equipment Preparation: Departure Airfield Operations
- Deploying units are accountable for activities in the marshaling area.
- The Call Forward Area responsibilities include load teams, mobility forces, and DACG.
- Deploying units must correctly assemble cargo and personnel for mission loads in the Alert Holding Area (AHA), a controlled area under A/DACG.
Equipment Preparation: Cargo and Joint Inspection Preparation
- Container keys must be accessible during all phases of marshaling, inspection, loading, and transportation.
Vehicle Operations Safety
- Vehicle drivers must have spotter personnel in place before backing toward or into an aircraft.
Fuel Regulations
- Vehicles loaded on KC-10 and KC-135 should not exceed a fuel limit of 1/2 tank.
- Any fuel or brake system leaks, even if minor, prohibit air shipment.
Marshalling Definition
- Marshalling refers to the organized assembly and movement of personnel and equipment from the unit to the aircraft.
Emergency Response Operation (ERO) Guidance
- During ERO operations with a C-5 aircraft, vehicles and personnel must move directly in line with the fuselage, at least 200 feet before turning and 300 feet before stopping.
Circle of Safety
- The Circle of Safety extends 25 feet from the aircraft's nose, tail, and wing tips.
Center of Balance Computation
- When calculating the center of balance for wheeled items, always round decimal numbers to the nearest whole number.
Moment Calculation
- A moment is calculated by multiplying weight by distance.
Joint Inspection Timeliness
- Cargo and equipment loads must be ready for joint inspection at least 8 hours before departure; personnel must be available for briefings and checks 4 hours prior.
Certification Authority
- ATTLA (Airlift Clearance Approval) issues cargo airlift certifications.
Safety Precaution Measures
- Wheel chocks are necessary to prevent vehicles from rolling into aircraft.
Ready Line Definition
- The Joint Inspection occurs in the Ready Line, where discrepancies are addressed.
Vehicle Parking Procedures
- Vehicles should be turned off, emergency brakes set, and keys left in the ignition when parked near an aircraft.
Clearance for Movement
- It's false to determine if vehicles can be driven between the wing tips of two aircraft without ensuring clearance.
Cargo Certification Responsibility
- The unit commander certifies ammunition, explosives, and hazardous materials for transport on DoD aircraft.
Center of Balance Marking Information
- The horizontal portion of the "T" marking on vehicles shows the gross weight information.
Cargo Marking Requirements
- All vehicles necessitate CB marking.
Studying That Suits You
Use AI to generate personalized quizzes and flashcards to suit your learning preferences.
Description
Test your knowledge on equipment preparation with this quiz focusing on weighing and marking procedures. Answer questions related to the proper marking techniques and the importance of ensuring accurate weight before the weighing process. Perfect for those involved in logistics and inventory management.
