Podcast
Play an AI-generated podcast conversation about this lesson
Questions and Answers
What should be checked for abnormality in the equipment?
What should be checked for abnormality in the equipment?
- Temperature and humidity
- Physical condition and abnormal sound/noise (correct)
- Operational speed and efficiency
- Visual appearance and color
What should be done if the Top Lid Cover Gasket is found to be loose?
What should be done if the Top Lid Cover Gasket is found to be loose?
- Ignore and continue operation
- Increase operating pressure
- Apply lubricant
- Tighten or replace (correct)
What component's tightness should be checked along with the Top Lid Cover toggle clamp?
What component's tightness should be checked along with the Top Lid Cover toggle clamp?
- Gear Box and Motor foundation nut bolts (correct)
- Cooling water inlet valve
- Conveyor belt tension
- Control panel wiring
What should be done if the Chain and Gears are found to be in poor condition?
What should be done if the Chain and Gears are found to be in poor condition?
Signup and view all the answers
What should be checked in relation to the oil level in the gearbox?
What should be checked in relation to the oil level in the gearbox?
Signup and view all the answers
What should be checked for physically and working condition?
What should be checked for physically and working condition?
Signup and view all the answers
What should be examined for tightness and physical condition?
What should be examined for tightness and physical condition?
Signup and view all the answers
Which component's working condition should be assessed?
Which component's working condition should be assessed?
Signup and view all the answers
What electrical connections should be inspected?
What electrical connections should be inspected?
Signup and view all the answers
What should be cleaned as part of the equipment inspection?
What should be cleaned as part of the equipment inspection?
Signup and view all the answers
