Engineering Drawing and Design: Dimensioning Tolerances
10 Questions
1 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the Basic Size in engineering dimensioning?

  • The designation used for general identification
  • The maximum and minimum sizes permissible for a specific dimension
  • The measured size
  • The theoretical size from which the limits for that dimension are derived (correct)

    • What is the Nominal Size used for in engineering dimensioning?

  • Theoretical size
  • Maximum and minimum permissible sizes
  • Measured size
  • General identification (correct)

    • What does Bilateral Tolerance permit in engineering dimensioning?

  • Variation in both directions from the specified dimension (correct)
  • No variation from the specified dimension
  • Fixed tolerance value
  • Variation in only one direction from the specified dimension

    • What is Maximum Material Size (Maximum material condition) in engineering dimensioning?

    <p>The limit of size that results in the part containing the maximum amount of material</p> Signup and view all the answers

    What is Design Size in engineering dimensioning?

    <p>The size from which the limits of size are derived by the application of tolerances</p> Signup and view all the answers

    What is the difference between Basic Size and Design Size in engineering dimensioning?

    <p>Basic Size is the theoretical size from which the limits for that dimension are derived, while Design Size refers to the size from which the limits of size are derived by the application of tolerances.</p> Signup and view all the answers

    What does Bilateral Tolerance permit in engineering dimensioning?

    <p>Variation is permitted in both directions from the specified dimension.</p> Signup and view all the answers

    What is Maximum Material Size (Maximum material condition) in engineering dimensioning?

    <p>The limit of size of a feature that results in the part containing the maximum amount of material.</p> Signup and view all the answers

    What is meant by Unilateral Tolerance in engineering dimensioning?

    <p>Variation is permitted in only one direction from the specified dimension.</p> Signup and view all the answers

    What does Nominal Size refer to in engineering dimensioning?

    <p>The designation used for general identification.</p> Signup and view all the answers

    More Like This

    Technical Drawing Quiz
    10 questions

    Technical Drawing Quiz

    KnowledgeablePrehnite avatar
    KnowledgeablePrehnite
    Sketching and Dimensioning Techniques
    16 questions

    Sketching and Dimensioning Techniques

    GenuineDobro avatar
    GenuineDobro
    Engineering Drawing Standards
    85 questions

    Engineering Drawing Standards

    SolicitousOklahomaCity avatar
    SolicitousOklahomaCity
    Dimensioning and Tolerancing Fundamentals
    80 questions

    Dimensioning and Tolerancing Fundamentals

    MightyMoldavite5525 avatar
    MightyMoldavite5525
    Use Quizgecko on...
    Browser
    Open
    Browser
    Browser