Electrical Measurements ELEG 323 Quiz
12 Questions
1 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the main purpose of an anti-aliasing filter in the context of analog-to-digital conversion?

  • To digitize the analog signal and hold it for quantization and encoding
  • To optimize the sampling frequency and price ratio
  • To improve the resolution and reduce noise in the sampled signal
  • To prevent harmful folding by ensuring the sampling frequency is twice the maximum frequency component of the function being sampled (correct)

Why must the sampling frequency in analog-to-digital conversion adhere to the Nyquist sampling theorem?

  • To ensure accurate display of the digital signal
  • To avoid harmful folding due to aliasing (correct)
  • To optimize the price-to-resolution ratio
  • To reduce noise and improve resolution

Which step in analog-to-digital conversion involves capturing and holding the analog signal for further processing?

  • Resolving and encoding
  • Quantization and encoding
  • Anti-aliasing filtering
  • Sampling and holding (correct)

Which measurement involves rise-time, attenuation, bridge circuit, resonance, and oscillation frequency?

<p>Capacitance and inductance measurement (C)</p> Signup and view all the answers

Which type of converter is known for its high resolution, linearity, and accuracy but has a limited bandwidth for DC signals?

<p>Dual Slope Converter (D)</p> Signup and view all the answers

What is the distinctive feature of the Flash Converter?

<p>Conversion of all bits in parallel (D)</p> Signup and view all the answers

What characterizes the Pipeline Converter in terms of processing samples?

<p>Residual is calculated and passed to next stage (A)</p> Signup and view all the answers

Which converter uses an iterative method to convert the signal bit by bit, starting from the most significant bit (MSB)?

<p>Successive Approximation Register (SAR) (A)</p> Signup and view all the answers

What is a key characteristic of the Delta-Sigma Converter?

<p>Modulator outputs a stream of ones and zeros (B)</p> Signup and view all the answers

What is a disadvantage of using a shunt resistor for current measurements?

<p>Voltage seen by the source changes as a function of current (C)</p> Signup and view all the answers

What is a key advantage of using a current sense amplifier for high-side measurement?

<p>Easy to detect load short to ground (B)</p> Signup and view all the answers

What does the modulator output in a Delta-Sigma Converter represent?

<p>A stream of ones and zeros (D)</p> Signup and view all the answers

More Like This

Electrical Measurements INM-300
10 questions

Electrical Measurements INM-300

SatisfactoryDenouement avatar
SatisfactoryDenouement
Electrical Measurements Overview Quiz
15 questions
Use Quizgecko on...
Browser
Browser