Questions and Answers
A 250 Volt, 1 amp, Class H cartridge fuse would look identical to a 250 volt, 30 amp, Class H cartridge fuse.
True
A new 250 volt, 50 amp, Class H cartridge fuse should have Class H stamped on it.
False
A 250 volt, 100 amp, Class H cartridge fuse can be purchased with an interrupt rating of 200,000 amps.
False
A 600 volt, 70 amp Class H cartridge fuse would fit into a 100 amp, 600 volt, non-rejection fuseholder.
Signup and view all the answers
A 600 volt, 200 amp, Class H cartridge fuse could be purchased current limiting.
Signup and view all the answers
A 250 volt, 50 amp, Class H cartridge fuse could be purchased in a renewable fuse type.
Signup and view all the answers
A 250 volt, 30 amp, Class H fuse would look just like a 250 volt, 30 amp, Class K fuse.
Signup and view all the answers
A Class H style fuse could fit into either a rejection fuseholder or a non-rejection fuseholder.
Signup and view all the answers
A 250 volt, 125 amp, Class H fuse will look identical to a 250 volt, 200 amp, Class H fuse.
Signup and view all the answers
A 600 volt, 200 amp class H fuse will fit into the same fuse holder as a 600 volt, 225 amp class H fuse.
Signup and view all the answers
A 250 volt, 35 amp, Class H fuse will fit into the same fuseholder as a 250 volt, 60 amp, Class K fuse.
Signup and view all the answers
Single Element and 'non-time delay' fuses mean the same thing.
Signup and view all the answers
Dual Element and Non Time Delay fuses refer to the same type of fuse.
Signup and view all the answers
A 50 Amp time delay fuse is likely to allow a 100 Amp overload current to pass through it for a minute or more before opening.
Signup and view all the answers
A Class K fuse can be purchased with a 200,000 amp interrupt rating.
Signup and view all the answers
Class K fuses can be purchased either current limiting or non-current limiting.
Signup and view all the answers
Class K fuses can be purchased either single element or dual element.
Signup and view all the answers
Class K fuses can be purchased in the renewable type.
Signup and view all the answers
A 250 volt, 30 amp, Class K fuse will fit into the same fuseholder as a 250 volt, 30 amp, Class H fuse.
Signup and view all the answers
A 600 volt, 100 amp Class RK fuse will fit into the same fuse holder designed to handle a 600 volt, 100 amp Class K fuse.
Signup and view all the answers
A 600 volt, 100 amp, RK fuse will fit into a fuseholder meant to hold a 600 volt, 70 amp, Class H fuse.
Signup and view all the answers
A Class RK-1 fuse can be purchased with an interrupt rating of 100,000 amps.
Signup and view all the answers
The great advantage of RK fuses is their ability to open quickly on overloads.
Signup and view all the answers
A 250 volt, 60 amp, Class K fuse will fit into a 250 volt, 60 amp, rejection fuseholder.
Signup and view all the answers
Class H and Class K fuses look identical and have the same short circuit/fault characteristics.
Signup and view all the answers
Class K and Class RK fuses look identical and have the same operating characteristics.
Signup and view all the answers
A class K-1 fuse will open just as quickly during a high fault condition as a class RK-1 fuse will.
Signup and view all the answers
Circuit Breakers provide overload protection but not short circuit protection.
Signup and view all the answers
Circuit Breakers provide short circuit protection but not overload protection.
Signup and view all the answers
Study Notes
Fuse Types and Characteristics
- Class H cartridge fuses can vary in amp ratings (1 amp to 200 amp), and identical appearance despite different ratings.
- A 250 volt, 30 amp Class H fuse appears similar to a Class K fuse of the same voltage and amperage.
- Class H fuses can be renewable, as seen in some 50 amp versions.
- Class K fuses have a maximum interrupt rating of 200,000 amps and can be single or dual element.
- Class K fuses cannot be renewable and differ in operating characteristics compared to RK fuses.
Compatibility and Fit
- 600 volt, 70 amp Class H fuses fit in 100 amp, 600 volt non-rejection fuseholders.
- A 250 volt, 35 amp Class H fuse fits into fuseholders designed for 250 volt, 60 amp Class K fuses.
- Class H and K fuses are interchangeable in terms of fit as they look identical.
- Class RK and K fuses also share a common fit in compatible fuseholders.
- Class RK fuses do not open quickly on overload, indicating slower response times under specific conditions.
Technical Specifications
- Single Element and non time delay fuses are equivalent, whereas dual element fuses are not.
- A 50 amp time delay fuse is designed to handle temporary overloads, allowing significant current without tripping.
- Class RK-1 fuses can be purchased but do not have specific interrupt ratings of 100,000 amps.
- Circuit breakers provide both overload and short circuit protection, contrary to misconceptions that they only protect against one.
Studying That Suits You
Use AI to generate personalized quizzes and flashcards to suit your learning preferences.
Description
Test your knowledge on electrical fuses with this quiz focusing on Class H cartridge fuses. Challenge yourself with true/false statements and learn more about specifications and ratings. Perfect for students or professionals in electrical engineering.