Electrical Circuits and Components

The portion of the wiring system between the load side of the overcurrent device or power-limited supply and the connected equipment, defines _______.

Conductors normally used to connect an equipment grounding conductor to the grounding electrode conductor, at the service equipment, or at the source of a separately derived system, defines a _______.

A device designed to open and close a circuit by nonautomatic means and to open the circuit automatically on a predetermined overcurrent without damage to itself when properly applied within its rating, defines a _______.

A contact device installed at the outlet for the connection of an attachment plug defines a _______.

The current, in amperes, that a conductor can carry continuously under the conditions of use without exceeding its temperature rating defines _______.

An enclosure that is designed for either surface mounting or flush mounting and provided with a frame, mat, or trim in which a swinging door or cover is hung defines a _______.

A general-use snap switch constructed so that it can be installed in device boxes or on box covers, or otherwise used in conjunction with wiring systems recognized by this Code defines an _______.

A connection intended to establish electrical continuity and conductivity between an equipment grounding conductor and other metallic parts of equipment defines an _______.

The assembly of one or more enclosed sections, having a common power bus and principally containing automatic overcurrent protective devices, defines a _______.

A switch intended for use in general distribution and branch circuits and is rated in amperes, and is capable of interrupting its rated current at its rated voltage defines a _______.