Questions and Answers
The outside must go with which checker if any all to sign the tag?
2nd checker
What does the term piggy backing mean?
Hanging an electronic tag that has a previously attached physical tag on it.
What is a standard tag-out?
A prepared list of tags to allow more rapid issuing of tags in the event of a casualty or isolation for a large number of jobs.
When hanging a danger tag onto a component, what is the first step?
Signup and view all the answers
Is it normal to have multiple physical tags on the same component?
Signup and view all the answers
Personnel, equipment hazards, and danger associated with maintenance for danger line items is in what block?
Signup and view all the answers
What sheet must be printed to get CO's permission for tag-out?
Signup and view all the answers
When do we use AAO'S?
Signup and view all the answers
Which document provides information for PPE and safety for electronic/electric equipment?
Signup and view all the answers
WAF'S and instruction for use can be found in what manual and what volume?
Signup and view all the answers
When opening a breaker box and a danger tag falls out onto the ground, what would you do?
Signup and view all the answers
Who can authorize single valve protection to a high energy system?
Signup and view all the answers
Plastic danger tags are allowed?
Signup and view all the answers
Double barrier protection is required when?
Signup and view all the answers
What do red flags in E-tagout indicate?
Signup and view all the answers
What do green flags in E-tagout indicate?
Signup and view all the answers
What is restoration configuration?
Signup and view all the answers
What sticker should be placed on the backside of a caution tag? What color is a caution tag?
Signup and view all the answers
Which tab is used for electronic signature?
Signup and view all the answers
Which document provides amplifying instruction specific to the Nimitz?
Signup and view all the answers
What is placement config?
Signup and view all the answers
What is the Nimitz instruction for electrical safety program?
Signup and view all the answers
What is the max length of extension cord allowed in flight deck or hangar bay?
Signup and view all the answers
If tagging out DC equipment, which department must it be routed through?
Signup and view all the answers
What are the requirements for line items issue and time to match in E-tagout?
Signup and view all the answers
What is on the back of a caution tag and its color?
Signup and view all the answers
When are cross checks required?
Signup and view all the answers
Which tags must DC tags be routed through no matter what?
Signup and view all the answers
What color is an Out of Calibration sticker?
Signup and view all the answers
During CNO avails or dry dock when will the first audit for a tag be completed?
Signup and view all the answers
Tag out line items for PMS must contain formatting. What is the required format?
Signup and view all the answers
What does a blue flag in E-tagout indicate?
Signup and view all the answers
When will the RA sign the danger tag?
Signup and view all the answers
What is the Nimitz amplifying instruction for Tag Outs?
Signup and view all the answers
Which manual is not found in the tag out binder?
Signup and view all the answers
When are locking devices allowed?
Signup and view all the answers
What are the basic reasons for tag-outs IAW 9210.3E?
Signup and view all the answers
What are standard tags and what are they used for?
Signup and view all the answers
When would you be required to print a LIRS sheet if E-tagout is still up and running?
Signup and view all the answers
Are tag-outs needed for pulling dead fuses?
Signup and view all the answers
Is it okay to hang tags in absence of RA?
Signup and view all the answers
Which tab do you annotate the auditing division in ESOMS?
Signup and view all the answers
Who is overall in charge of safety on the Nimitz?
Signup and view all the answers
During dry dock the shipyard may have their own tagout binder which is not allowed to be audited by SF.
Signup and view all the answers
What form is required for outside work?
Signup and view all the answers
Drawings from MSC are validated for how long?
Signup and view all the answers
Electrical safety checks are broken down into what categories?
Signup and view all the answers
What does an orange tag in E-tagout signify?
Signup and view all the answers
Double barrier tagout is to be authorized by whom?
Signup and view all the answers
When are tag-out audits conducted?
Signup and view all the answers
What is the required signature for validation of drawing and isolation?
Signup and view all the answers
What is TORS and whose permission is needed for authorized use over E-tag?
Signup and view all the answers
Study Notes
E-Tagout Overview
- E-Tagout is critical for safety during maintenance and isolation of equipment.
- Utilizes electronic tags to indicate the status of components.
Key Definitions and Concepts
- 2nd Checker: The outside must coordinate with this person to sign the tag.
- Piggy Backing: Refers to attaching an electronic tag to a component that already has a physical tag.
- Standard Tag-Out: Pre-prepared tags that expedite the tagging process during large-scale outages or equipment isolation.
Danger Tagging Procedures
- Initial Step for Danger Tags: Verify the value, breaker, and designation against the related danger tags.
- Multiple Physical Tags: Not permitted on the same component to maintain clarity and safety.
Risk Assessment and Documentation
- Hazards Block: Contains personnel, equipment hazards, and associated dangers.
- CO Permission Document: LIRS must be printed to obtain permission for tagout.
- Nimitz Specific Instructions: "NIMITZINST 9210.E" provides amplifying instructions for tagging specific to the Nimitz.
Safety and Compliance Protocols
- Authorized Personnel: Only the CO can authorize single valve protection for high-energy systems.
- Plastic Danger Tags: Never allowed for safety reasons.
- Double Barrier Protection: Required in high-risk situations such as high temperature, pressure, or hazardous materials.
Tag Indicators
- Red Flags: Indicate tags hanging; caution is needed.
- Green Flags: Show that tags have been issued and processes are activated.
- Blue Flags: Indicate that components are ready to be cleared.
Tagging Conditions and Recommendations
- Caution Tag Instructions: Amplifying instructions should be affixed on the back of a yellow caution tag.
- Extension Cord Limit: Maximum length allowed in flight deck or hangar bay is 200 ft.
- Locking Devices: Not permitted at any time in the tagging process.
Audit and Oversight Procedures
- Tag-Out Audits Timing: Conducted weekly and as needed during maintenance checks.
- Engagement of Engineering Department: Required for routing DC equipment tagging.
Precision and Requirement Compliance
- No Tag Needed for Dead Fuses: Pulling dead fuses does not necessitate tagging.
- Drawing Validation: Drawings from MSC are valid for three months and require AO approval for validation.
- Presence of RA: Tags cannot be hung in the absence of the Responsible Authority (RA).
Nimitz Specific Protocols
- Nimitz Electrical Safety Program: Documented in Nimitz Instruction 5100.2L.
- Standardization for PMS Tag-Out: Must follow specific formatting: Shop[PMS]MIP PERIODICITY EQUIPMENT DATE.
- Tag Out Requirements for WAFs: Work Authorization Forms are necessary for outside work.
Summary of Essential Contacts
- CO's Role: Overall in charge of safety aboard the Nimitz, also responsible for authorizing various safety and isolation measures.
- Auditing Division Tab: Line item verification tab in ESOMS is vital for annotation.
Conclusion
Understanding these aspects of E-Tagout ensures compliance with safety protocols and effective maintenance operations aboard ships.
Studying That Suits You
Use AI to generate personalized quizzes and flashcards to suit your learning preferences.
Description
Test your knowledge on E-Tagout terminology with these flashcards. The quiz covers essential terms and definitions related to the E-Tagout process, including the roles of checkers and tag standards. Perfect for anyone involved in safety and compliance in the workplace.
