Determination of Young's Modulus Quiz

The extension of a wire under tension depends on factors such as the tension, the diameter, length, and material of the wire.

Stress is defined as the force applied per unit area of cross-section, and its unit of measurement is Newton per square meter (N/m^2) or Pascal (Pa).

Strain is defined as the extension per unit length, and it has no units since it is the ratio of two lengths.

<p>The strain produced in a stretched wire is proportional to the stress within the limit of proportionality.</p> Signup and view all the answers

<p>Young's Modulus is the ratio of stress to strain within the limit of proportionality, and its unit of measurement is Newton per square meter (N/m^2).</p> Signup and view all the answers

<p>$ICM = \frac{1}{2}ML^2 + mz^2$</p> Signup and view all the answers

<p>$R = \frac{1}{2}L$</p> Signup and view all the answers

<p>$I\ddot{\theta} = -mgL\sin\theta$</p> Signup and view all the answers

<p>$\frac{M}{m} = 1$</p> Signup and view all the answers

<p>$g = \frac{-I\ddot{\theta}}{mz}$</p> Signup and view all the answers