DB-5R5D105T Capacitor Datasheet

DB-5R5D105T Datasheet

• DB-5R5D105T is a 5.5V standard capacitor series with a small size and large capacity.

• It has excellent voltage holding and a wide

  Specifications

  • Category temperature: The DB-5R5D105T capacitor series is designed to operate within a wide temperature range of -25°C to +70°C, making it suitable for various applications. This range allows for reliable performance in different environmental conditions, ensuring the capacitor's stability and functionality.

  range of -25 to +70°C.

Characteristics

• The capacitor has a uniform 5mm pitch of terminal spacing.
• The φ21.5×7.5L size can encase up to 1.5F.
• It is ideal for backing up of This capacitor operates reliably in a wide temperature range of -25°C to +70°C, making it suitable for various applications. It features a uniform 5mm pitch of terminal spacing, φ21.5×7.5L size, and is ideal for backing up CMOS, ICs, RAMs, RTCs, and other devices., ICs, RAMs, RTCs, and other devices.

Specifications

• Category The DB-5R5D105T capacitor series is a 5.5V standard capacitor with a small size and large capacity, operating within a wide temperature range of -25°C to +70°C, making it suitable for various applications.range: -25 to +70°C.
• Tolerance at rated capacitance: -20 to +80%.
• Internal resistance at 1 kHz: 0.047 to 1.5F (depending on the rated capacitance).

Performance at High and Low Temperature

• Percentage of capacitance change: Within ±30% of the value at 20°C.
• Internal resistance: Less than five times of the value at 20°C.

Endurance and Shelf Life

• Endurance test time: 1000 hours at 70°C.
• Percentage of capacitance change: Within ±30% of the initial measured value.
• Internal resistance: Within four times of the initial specified value.
• Shelf life: 1000 hours at 70°C, with the same performance as endurance.

Applicable Standards

• Conforms to JIS C5160-1 2009 (IEC 62391-1 2006).

DBN Series (Low Resistance)

• The DBN series has a lower internal resistance (85% of the DB series).
• It excels in rapid charge, with a capacity to charge and discharge with 1.5 times as much current (mA) as the rated capacitance.

DBN Series Specifications

• Category temperature range: -25 to +70°C.
• Tolerance at rated capacitance: -20 to +80%.
• Internal resistance at 1 kHz: 25 to 20Ω (depending on the rated capacitance).

DBN Series Performance

• Percentage of capacitance change: Within ±30% of the value at 20°C.
• Internal resistance: Less than five times of the value at 20°C.

DBN Series Endurance and Shelf Life

• Endurance test time: 1000 hours at 70°C.
• Percentage of capacitance change: Within ±30% of the initial measured value.
• Internal resistance: Within four times of the initial specified value.
• Shelf life: 1000 hours at 70°C, with the same performance as endurance.

Absolute Maximum Ratings

• Input voltage (REFIN, VIN, VLDOIN, VOSNS) must be between -0.3V and 3.6V.
• Input voltage (EN) must be between -0.3V and 6.5V.
• Output voltage (REFOUT, VO) must be between -0.3V and 3.6V.
• Output voltage (PGOOD) must be between -0.3V and 6.5V.
• Operating junction temperature (TJ) must be between -40°C and 150°C.
• Storage temperature (Tstg) must be between -55°C and 150°C.

Electrical Characteristics

• Supply current (IIN) is typically 1 mA at 25°C, VEN = 3.3V, and no load.
• Shutdown current (IIN(SDN)) is typically 80 μA at 25°C, VEN = 0V, and no load.
• Supply current of VLDOIN (ILDOIN) is typically 1 μA at 25°C, VEN = 3.3V, and no load.
• Shutdown current of VLDOIN (ILDOIN(SDN)) is typically 50 μA at 25°C, VEN = 0V, and no load.
• Input current (IREFIN) is typically 1 μA.
• Output DC voltage (VO) is typically 1.25V, 0.9V, 0.75V, or 0.6V depending on the DDR type.
• Output voltage tolerance (VVOTOL) is typically ±25mV.
• VO source current limit (IVOSRCL) is typically 3A to 4.5A.
• VO sink current limit (IVOSNCL) is typically 3.5A to 5.5A.
• Discharge current (IDSCHRG) is typically 18Ω to 25Ω.
• PGOOD threshold (VTH(PG)) is typically -20% to 20% with respect to REFOUT.
• PGOOD hysteresis is typically 5%.
• PGOOD start-up delay (tPGSTUPDLY) is typically 2ms.
• Output low voltage (VPGOODLOW) is typically 0.4V.
• PGOOD bad delay (tPBADDLY) is typically 10μs.
• Leakage current (IPGOODLK) is typically 1μA.
• REFIN voltage range is typically 0.5V to 1.8V.
• REFIN undervoltage lockout (VREFINUVLO) is typically 360mV to 420mV.
• REFIN undervoltage lockout hysteresis (VREFINUVHYS) is typically 20mV.
• REFOUT voltage is typically equal to REFIN voltage.