CSX Conductor Training Week 1 Test Review

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

Who is responsible for making pay claims?

Ranking Employee or Employee to be paid

What is the hand signal for reduce speed?

Arm out horizontal over the track

Which of the following are allowed by the Rulebook?

Disregard signals

Take the unsafe course

Always take the safe course (correct)

Ignore safety protocols

What is the hand signal for release air brakes?

Hand held overhead when equipment is standing Signup and view all the answers

Who authorizes a utility employee to join an assigned crew?

Ranking Employee Signup and view all the answers

What is the normal position for a switch or derail?

In the 'on' or derailing position Signup and view all the answers

Before lining a switch or derail, what must an employee do?

Ensure that any preceding movement has passed clearance points and that the device is not locked, spiked, or tagged 'out of service' Signup and view all the answers

If a lock is found to be defective or missing on a main line switch or derail, what must an employee do?

Report the device to Trainmaster/Dispatcher and follow their instructions Signup and view all the answers

When an employee determines that a switch or derail is defective, what must they do?

Not operate the device and report it to the proper authority Signup and view all the answers

After lining each switch when standing in a yard using multiple switches, an employee should check what?

That all switch points are flush and aligned properly Signup and view all the answers

When using a portable radio in a shove move, employee instructions must specify what?

Employee is clear of all tracks and that switches and derails are properly aligned for the move Signup and view all the answers

What is a system of tracks, other than main tracks and sidings, used for making up trains for storing cars and other purposes?

Yard Signup and view all the answers

By definition, what is the location in a turnout where it is unsafe to pass on an adjacent track?

Clearance Point Signup and view all the answers

What is a track connection between two adjacent tracks, not necessarily parallel, consisting of two switches?

Crossover Signup and view all the answers

What is a device of 'necessary track' used to change from one track to another?

Switch Signup and view all the answers

What is the minimum distance you must stand from a switch or derail involved in the route of a passing train?

30' Signup and view all the answers

When crossing tracks with standing equipment, what safety precautions must be taken?

Stop and check both directions and do not cross within 25' of standing equipment Signup and view all the answers

In addition to facing the equipment, what steps must be taken when disembarking moving equipment?

Avoid getting off in an unsafe area and stop at the bottom rung to observe where to place your foot Signup and view all the answers

When crossing standing equipment, you must find sufficient handholds and avoid what?

Putting feet on couplers, air hoses, anglecocks, etc. Signup and view all the answers

When riding a car, what must you maintain?

3 points of contact and face the direction of movement Signup and view all the answers

Do not ride on a car with a grab bar that is less than ___________ above the ground.

12" Signup and view all the answers

What is required when riding a car approaching a close clearance?

Dismount the car prior to reaching the close clearance Signup and view all the answers

What can be used to clear foreign materials from a switch?

Broom Signup and view all the answers

Employees are prohibited from using alcohol...

On CSX property or vehicles Signup and view all the answers

When working with air hoses, which of the following apply?

Make certain that both anglecocks are closed before adjusting hoses Signup and view all the answers

When handling an EOT device, what must an employee do?

Secure EOT air hose by S hook if available and do not place the EOT where it may become a tripping hazard Signup and view all the answers

When lifting objects, what safety steps must be taken?

Never use excessive force and assume a balanced posture Signup and view all the answers

Your coworker is acting in an unsafe manner, what should you do?

Warn the employee of their unsafe behavior Signup and view all the answers

Study Notes

Pay Claims

Responsible party for making pay claims is the ranking employee or the employee to be paid.

Hand Signals

Hand signal for reducing speed: Arm extended horizontally over the track.
Hand signal for releasing air brakes: Hand held overhead when equipment is standing.

Safety Protocols

Always prioritize safety by taking the safe course as outlined in the rulebook.
Before lining a switch or derail, confirm that any preceding movement has cleared and that the device is not locked or tagged out of service.
Reporting is essential for defective or missing locks on mainline switches or derails to the Trainmaster or Dispatcher.

Equipment and Switch Operations

The normal position for a switch or derail is in the "on" or derailing position.
After lining switches during a long shove in the yard, check that all switch points are flush and aligned.
Ensure to be clear of all tracks and properly aligned switches when using a portable radio during maneuvers.

Definitions of Key Locations

A yard is a system of tracks used for making up trains, storing cars, and other purposes.
Clearance point: The location in a turnout where it's unsafe to pass on an adjacent track.
Crossover: A track connection between two adjacent tracks, allowing crossing from one to another using two switches.

Safety Distances

Maintain a minimum distance of 30 feet from a switch or derail involved in the route of a passing train.
When crossing tracks with standing equipment, stop to check both directions and avoid crossing within 25 feet of the standing equipment.

Dismounting and Riding Precautions

Maintain three points of contact while disembarking from moving equipment and observe foot placement.
Avoid unsafe areas when getting off and prepare for unexpected movements when riding a car; face the direction of movement.

Handling Equipment

Do not ride on cars with grab bars less than 12 inches above ground.
Dismount a car before reaching close clearance to ensure safety.
Use appropriate tools like brooms to clear foreign materials from switches.

Alcohol and Conduct

Prohibition of alcohol applies while on duty, reporting for duty, or on CSX property and vehicles.

Air Hose Procedures

When working with air hoses, avoid extending hoses over the drawbar and ensure both anglecocks are closed before manual adjustments.

Handling EOT Devices

Secure EOT air hoses using an s-hook and avoid creating trip hazards with the EOT placement.

Lifting Safety Guidelines

When lifting, refrain from using excessive force and maintain a balanced posture for safety.

Addressing Unsafe Behaviors

If a coworker is exhibiting unsafe behavior, warn them about their conduct for overall safety.

Studying That Suits You

Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

Description

Prepare for your CSX Conductor training with this Week 1 test review flashcards. Each flashcard covers critical concepts such as pay claims responsibility and hand signals used in train operations. Boost your understanding of the rulebook and safety protocols essential for the role.