CQA Tester Training: Compliance Submission
30 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the purpose of switching the Release Check Mode to Release during testing?

  • To check for differences in the build (correct)
  • To test the console's connectivity
  • To improve the installation process
  • To verify the test cases

    • Which of the following steps is NOT part of the Xbox One installation process described in the text?

  • Select the Add console option
  • Open the Xbox One Manager
  • Type in the console IP and press Add
  • Locate the .XVC files provided by your lead and drag them onto the Manager (correct)

    • What is the first step in the Switch installation process described in the text?

  • Connect your Switch to your PC using the relay box and USB cable (correct)
  • Select the console in the list and click 'OK'
  • Right click in the Target List and select Add Target
  • Open Nintendo Target Manager

    • What is the purpose of the 'Release Check Mode' mentioned in the text?

    <p>To check for differences in the build</p> Signup and view all the answers

    Which of the following is NOT a step in the Switch installation process described in the text?

    <p>Locate the .XVC file on your local drive and press OK to begin installation</p> Signup and view all the answers

    What is the purpose of the 'CQA runs' mentioned in the text?

    <p>To perform installation and general testing</p> Signup and view all the answers

    Which of the following is NOT a step in the Xbox One installation process described in the text?

    <p>Locate the .XVC files provided by your lead and drag them onto the Manager</p> Signup and view all the answers

    What is the purpose of the 'Test Cases' mentioned in the text?

    <p>To change the settings for installation and general testing</p> Signup and view all the answers

    What is the purpose of the 'relay box' mentioned in the Switch installation process?

    <p>To connect the Switch to the PC</p> Signup and view all the answers

    What is the purpose of the 'Nintendo Target Manager' mentioned in the Switch installation process?

    <p>To add the Switch console to the Target List</p> Signup and view all the answers

    The Release Check Mode should be switched to Debug at some point during testing.

    <p>False</p> Signup and view all the answers

    The Xbox One Manager is opened before selecting the Add console option.

    <p>True</p> Signup and view all the answers

    The.XVC files are usually provided by the manager in charge of the testing process.

    <p>False</p> Signup and view all the answers

    The Switch must be connected to the PC using a HDMI cable in the E-DevKit.

    <p>False</p> Signup and view all the answers

    In the Switch installation process, the build needs to be located on a local drive before installation begins.

    <p>True</p> Signup and view all the answers

    The Release Check Mode should be switched to Test during general testing.

    <p>False</p> Signup and view all the answers

    The Nintendo Target Manager should be opened before adding a Switch target.

    <p>True</p> Signup and view all the answers

    The 'CQA runs' setting should not be changed during Test Cases.

    <p>False</p> Signup and view all the answers

    Selecting 'Connect' in the Target List establishes the connection with the console in Nintendo Target Manager.

    <p>True</p> Signup and view all the answers

    'Application or Patch' must be installed before locating the build on the local drive during Switch installation.

    <p>False</p> Signup and view all the answers

    Match the following actions with their correct console: Open the Xbox One Manager

    <p>Xbox One = Select the Add console option in the top left Switch = Right click in the Target List and select Add Target</p> Signup and view all the answers

    Match the following steps with their correct console: Connect your Switch to your PC, using the relay box and USB cable provided in the E-DevKit

    <p>Xbox One = Drag the .XVC file from windows explorer onto white area in the Manager Switch = Open Nintendo Target Manager</p> Signup and view all the answers

    Match the following terms with their correct purpose: Release Check Mode

    <p>Release Check Mode = Should ideally be switched to Release at some point during testing to check for differences Nintendo Target Manager = Should be opened before adding a Switch target CQA runs = Use these settings for Installation and general testing in CQA runs, changing as required for Test Cases Test Cases = Changing as required for Test Cases</p> Signup and view all the answers

    Match the following actions with their correct step: Right click in the Target List and select Add Target

    <p>Nintendo Target Manager = 'Application or Patch' must be installed before locating the build on the local drive Xbox One Manager = 'Locate the .XVC files generally provided by your lead</p> Signup and view all the answers

    Match the following instructions with their correct process: Locate the build on your local drive and press OK to begin installation

    <p>Switch = 'Connect' in the list and select 'Connect' Xbox One = 'Connect' in the list and select 'Connect'</p> Signup and view all the answers

    Match the following settings with their correct purpose: CQA runs

    <p>CQA runs = Use these settings for Installation and general testing in CQA runs, changing as required for Test Cases Release Check Mode = Should be switched to Test during general testing Test Cases = 'CQA runs' setting should not be changed during Test Cases Nintendo Target Manager = 'CQA runs' mentioned in Nintendo Target Manager</p> Signup and view all the answers

    Match the following terms with their purpose: Relay box

    <p>Relay box = 'Connect your Switch to your PC, using the relay box and USB cable provided in the E-DevKit Release Check Mode = 'Connect your Switch to your PC, using the relay box and USB cable provided in the E-DevKit Nintendo Target Manager = 'Connect your Switch to your PC, using the relay box and USB cable provided in Nintendo Target Manager Test Cases = 'Connect your Switch to your PC, using HDMI cable in E-DevKit</p> Signup and view all the answers

    Match the following actions with their correct sequence: Type in the console IP and press Add

    <p>Xbox One = 'Open Nintendo Target Manager' Switch = 'Type in console IP and press Add'</p> Signup and view all the answers

    Match the following steps with their correct order: Open Nintendo Target Manager

    <p>Nintendo Target Manager = 'Right click on console in list and select Connect' Xbox One Manager = 'Right click on console in list and select Install Application or Patch' Switch = 'Open Nintendo Target Manager'</p> Signup and view all the answers

    Match the following terms with their correct usage: .XVC files

    <p>.XVC files = .XVC files should be connected correctly through HDMI cable during installation</p> Signup and view all the answers

    More Like This

    Mastering the Nintendo Switch
    10 questions

    Mastering the Nintendo Switch

    BeneficialSense avatar
    BeneficialSense
    Use Quizgecko on...
    Browser
    Open
    Browser
    Browser