Connecting VPCs to a Transit Gateway
20 Questions
1 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

Which IP-address is configured on the FortiGate device as the peer BGP IP-address?

  • 169.254.120.2
  • 169.254.120.1 (correct)
  • 192.168.50.0
  • 169.254.120.3

    • Which two IP-addresses are configured on the TGW side of the connected peer?

  • 169.254.120.1 and 169.254.120.2
  • 192.168.50.0 and 169.254.120.1
  • 169.254.120.2 and 169.254.120.3 (correct)
  • 169.254.120.1 and 169.254.120.3

    • What must be done when attaching a VPC to a transit gateway?

  • Isolate subsets of attachments
  • Create an additional route table
  • Add routes to the subnet route table (correct)
  • Disable the default route table

    • Which traffic will use the TGW attachment as the next hop, as per the example shown?

    <p>0.0.0.0/0</p> Signup and view all the answers

    What does the transit gateway default route table serve as?

    <p>The default association and propagation route table</p> Signup and view all the answers

    What can be done by creating additional route tables and disabling the default route table?

    <p>Isolate subsets of attachments</p> Signup and view all the answers

    What does the transit gateway route packets between attachments using?

    <p>Transit gateway route tables</p> Signup and view all the answers

    What can be configured to propagate routes to the transit gateway route tables?

    <p>All of the above</p> Signup and view all the answers

    What can be added to the transit gateway route tables?

    <p>Static routes</p> Signup and view all the answers

    How are packets routed from one attachment to another attachment?

    <p>Using the route that matches the destination IP-address</p> Signup and view all the answers

    Which attachment type is used as the underlying transport by the Connect attachment?

    <p>Transport attachment</p> Signup and view all the answers

    Which protocol is used over the Connect attachment?

    <p>GRE</p> Signup and view all the answers

    What is the CIDR block for the BGP addresses used for BGP peering?

    <p>169.254.120.0/24</p> Signup and view all the answers

    What is the CIDR block range for the inside IP addresses used for BGP peering?

    <p>169.254.0.0/16</p> Signup and view all the answers

    What is the IP address of the TGW GRE side of the Connect peer?

    <p>192.0.2.175</p> Signup and view all the answers

    What is the IP address of the FortiGate side of the TGW Connect peer?

    <p>10.0.0.29</p> Signup and view all the answers

    What type of connection is established between the TGW and FortiGate VM in the VPC?

    <p>Connect attachment</p> Signup and view all the answers

    What is the CIDR block range for IP-v4 inside addresses?

    <p>169.254.0.0/16</p> Signup and view all the answers

    What is the CIDR block range for the TGW CIDR block?

    <p>192.0.2.175/29</p> Signup and view all the answers

    What is the CIDR block range for the IP-v4 addresses used for BGP peering?

    <p>169.254.120.0/24</p> Signup and view all the answers

    More Like This

    Transit Gateway
    10 questions

    Transit Gateway

    VisionarySugilite avatar
    VisionarySugilite
    Transit Gateway (TGW) Attachment Methods and Connectivity Quiz
    6 questions

    Transit Gateway (TGW) Attachment Methods and Connectivity Quiz

    VisionarySugilite avatar
    VisionarySugilite
    Transit Gateway Route Associations Quiz
    20 questions

    Transit Gateway Route Associations Quiz

    VisionarySugilite avatar
    VisionarySugilite
    Connecting VPCs to a Transit Gateway
    20 questions

    Connecting VPCs to a Transit Gateway

    VisionarySugilite avatar
    VisionarySugilite
    Use Quizgecko on...
    Browser
    Open
    Browser
    Browser