Connecting VPCs to a Transit Gateway

Play an AI-generated podcast conversation about this lesson

Which attachment type is used as the underlying transport by the Connect attachment?

Transport attachment (correct)

VPC attachment

Direct Connect attachment

Connect attachment

What protocol is used over the Connect attachment?

BGP

GRE (correct)

TCP

HTTP

What is the CIDR block used for BGP peering?

192.0.2.175/29

169.254.120.0/24

10.0.0.29/32

169.254.0.0/16 (correct)

What is the CIDR block range for IP-v4 that must be specified for the Connect peer?

192.0.2.175/29 Signup and view all the answers

What is the IP address of the FortiGate side of the TGW Connect peer?

10.0.0.29 Signup and view all the answers

What is the IP address of the Transit gateway side of the Connect peer?

169.254.120.0 Signup and view all the answers

How many peering connections are shown in the slide?

2 Signup and view all the answers

What is the CIDR block range for the TGW GRE IP address?

192.0.2.175/29 Signup and view all the answers

What is the CIDR block range for the autogenerated IP address of the Transit gateway side of the Connect peer?

169.254.120.0/24 Signup and view all the answers

What is the CIDR block range for the inside IP addresses used for BGP peering?

169.254.0.0/16 Signup and view all the answers

Which IP-address is configured on the FortiGate device as the peer BGP IP-address?

169.254.120.1 Signup and view all the answers

Which IP-addresses are configured on the TGW side of the connected peer?

169.254.120.2 and 169.254.120.3 Signup and view all the answers

What must be done when attaching a VPC to a transit gateway?

Add routes to the subnet route table Signup and view all the answers

Which traffic will use the TGW attachment as the next hop?

All traffic except 192.168.50.0/24 subnet traffic in the Spoke VPC A Signup and view all the answers

What is the purpose of the transit gateway default route table?

To propagate routes from the attached VPCs, VPN connections, and direct connect gateways Signup and view all the answers

What can be done by creating additional route tables and disabling the default route table?

Isolate subsets of attachments Signup and view all the answers

How does the transit gateway route packets between attachments?

Using transit gateway route tables Signup and view all the answers

What can be added to the transit gateway route tables?

Routes from the route tables for the attached VPCs, VPN connections, and direct connect gateways Signup and view all the answers

What happens when a packet comes from one attachment?

It is routed to another attachment using the route that matches the destination IP-address Signup and view all the answers

What is the CIDR-block for each VPC used for?

To propagate to the route table Signup and view all the answers