Podcast
Questions and Answers
The impression must extend into the ______ chamber
The impression must extend into the ______ chamber
nasal
It is these undercuts that provide the ______ capability of the appliance
It is these undercuts that provide the ______ capability of the appliance
retention
The impression materials used for this step are impression compound, elastomeric impression materials, and irreversible ______
The impression materials used for this step are impression compound, elastomeric impression materials, and irreversible ______
hydrocolloids
A number of positions have been adopted for cleft palate impression making in infants, including prone, facedown, upright and even ______ down
A number of positions have been adopted for cleft palate impression making in infants, including prone, facedown, upright and even ______ down
Signup and view all the answers
Before taking impression, deeper undercuts of cleft should be blocked with wet gauze piece tied in ______ thread
Before taking impression, deeper undercuts of cleft should be blocked with wet gauze piece tied in ______ thread
Signup and view all the answers
The reason for making the special tray from self-cured acrylic resin is to have sufficient rigidity to carry the secondary impression ______
The reason for making the special tray from self-cured acrylic resin is to have sufficient rigidity to carry the secondary impression ______
Signup and view all the answers
Some feeding plate designs are tied with ______ thread in order to facilitate easy insertion and removal of the prosthesis.
Some feeding plate designs are tied with ______ thread in order to facilitate easy insertion and removal of the prosthesis.
Signup and view all the answers
The feeding plate is fabricated using ______ acrylic resin material with a minimum thickness of 2mm.
The feeding plate is fabricated using ______ acrylic resin material with a minimum thickness of 2mm.
Signup and view all the answers
After proper trimming, finishing, and polishing, the feeding plate was tried in the patient’s oral cavity, and minor adjustments were made and final polishing of the feeding plate was done.
After proper trimming, finishing, and polishing, the feeding plate was tried in the patient’s oral cavity, and minor adjustments were made and final polishing of the feeding plate was done.
Signup and view all the answers
A regular follow-up of the patient Mother (holding the child at an angle of 45°), which reduces ______ regurgitation.
A regular follow-up of the patient Mother (holding the child at an angle of 45°), which reduces ______ regurgitation.
Signup and view all the answers
It is indicated that a check-up every 3-4 weeks is required. A new obturator should be constructed every three months to accommodate the enlarged ______ sutures at growth.
It is indicated that a check-up every 3-4 weeks is required. A new obturator should be constructed every three months to accommodate the enlarged ______ sutures at growth.
Signup and view all the answers
Construction feeding plate from ______ material with digital impression.
Construction feeding plate from ______ material with digital impression.
Signup and view all the answers
