Cisco Router DHCP Configuration Quiz
12 Questions
3 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the purpose of the 'hostname' command in the configuration?

  • Change the name of the router (correct)
  • Assign an IP address to the router
  • Create a new interface on the router
  • Enable DHCP on the router
  • What does the command 'no sh' following 'ip add' achieve?

  • Disables the interface
  • Assigns an IP address
  • Enables the interface (correct)
  • Configures DHCP
  • What is the significance of the '%LINK-5-CHANGED' message?

  • Represents a hardware failure
  • Indicates that a link has been successfully established (correct)
  • Shows an error in IP address assignment
  • Signals a problem with DHCP configuration
  • After configuring 'f0/1', what is the next step in setting up a DHCP server?

    <p>Configure DHCP pool settings</p> Signup and view all the answers

    What is the purpose of setting '255.255.255.0' after an IP address?

    <p>Defines the subnet mask</p> Signup and view all the answers

    Which command would you use to view the configured IP interfaces on the router?

    <p>show ip int br</p> Signup and view all the answers

    What is the status of FastEthernet0/1 interface?

    <p>Up up</p> Signup and view all the answers

    What is the IP address assigned to Vlan1?

    <p>Unassigned</p> Signup and view all the answers

    What command is used to exclude the IP address 192.168.1.1 from DHCP assignments?

    <p>ip dhcp exclude 192.168.1.1</p> Signup and view all the answers

    What is the subnet mask used for the network 192.168.2.0 in the DHCP pool configuration?

    <p>255.255.255.0</p> Signup and view all the answers

    Which address is configured as the default router for the network 192.168.2.0 in the DHCP pool configuration?

    <p>192.168.2.1</p> Signup and view all the answers

    What does 'dhcp-server(config)#' indicate in the given text?

    <p>'dhcp-server(config)#' represents a prompt in configuration mode.</p> Signup and view all the answers

    Study Notes

    Cisco Router Configuration

    • The hostname command is used to assign a name to a router.
    • The no sh command, when used after ip add, prevents the interface from being shut down.
    • The %LINK-5-CHANGED message indicates a change in the interface's link state.

    DHCP Server Configuration

    • After configuring f0/1, the next step in setting up a DHCP server is to configure the DHCP pool.
    • The 255.255.255.0 subnet mask is used to specify the range of IP addresses that can be assigned to devices on a network.
    • The show ip interface brief command is used to view the configured IP interfaces on the router.

    Interface Status and Configuration

    • The FastEthernet0/1 interface is up and configured with an IP address.
    • The IP address assigned to Vlan1 is not specified in the given text.
    • The dhcp exclude command is used to exclude the IP address 192.168.1.1 from DHCP assignments.
    • The subnet mask used for the network 192.168.2.0 in the DHCP pool configuration is 255.255.255.0.
    • The default router for the network 192.168.2.0 in the DHCP pool configuration is 192.168.2.1.
    • dhcp-server(config)# indicates that the user is in the DHCP server configuration mode.

    Studying That Suits You

    Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

    Quiz Team

    Description

    Test your knowledge on configuring DHCP on a Cisco router using Router CLI commands. This quiz covers initial configuration steps, setting up the interface, assigning IP addresses and enabling the interface.

    More Like This

    Use Quizgecko on...
    Browser
    Browser