10 Questions
Section under Chapter 2 (Scope of Safety) of Safety Management Manual which is a key component of safety management and includes hazard identification, safety risk assessment, safety risk mitigation and risk acceptance.
Safety Risk Management
Who Decides on course of action of Low Level Risk?
Supervisory Personnel
Who Decides on course of action of Medium-Level Risk?
Division Managers
Who Decides on course of action of High-Level Risk?
CEO and VPs
If a condition exist that is deemed to be a “No-Go” item, the process shall be stopped immediately until acceptable level of safety is acquired and maintained thru the conduct of proper risk assessment process. The following conditions are considered “No-Go” item except?
Process with medium risk potential where no mitigating action/s has been established based on the performance of risk assessment.
The principal objective of an open safety reporting policy is to proactively identify safety and health hazards within the system to prevent incidents and occurrences, and to mitigate these hazards that may pose a risk to employees, customers or operations. Note that every occurrence is used as an opportunity to learn valuable safety lessons.
True
What is a Safety Risk Assessment?
Evaluation of Potential Risk
First Step in Risk Assessment Process?
Identify the Safety Hazards
Step 2 in Risk Assessment Process?
Who might be harmed and how
Step 3 of Risk Assessment Process
Evaluate the Risk involved and on precautions.
Explore key components of safety management including hazard identification, safety risk assessment, mitigation, and risk acceptance as outlined in Chapter 2 of the Safety Management Manual.
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free
