CCNP Dump: IP SDP SA-cache and RPF
11 Questions
1 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the RPF interface for the IP address 10.1.255.241?

  • Vlan11
  • Vlan10 (correct)
  • Fo9/1.1034
  • Fo9/1.1035

Which multicast group does the IP address 10.88.184.101 belong to?

  • 239.192.0.2 (correct)
  • 239.192.0.3
  • 239.192.0.1
  • 239.192.0.4

What is the Reason given for the rejection of (10.8.148.101, 239.192.0.1)?

  • rpf all learned fromte st (correct)
  • jeasons rpf-fall
  • originated from site a RT1
  • learned from central site RTI

Which Routing Table entry provides information about 10.1.255.241/32?

<p>&quot;ospf 15” distance 110, metric 3, type intra area (B)</p> Signup and view all the answers

What configuration is missing to establish an OSPF neighbor adjacency between R1 and R2?

<p>Configuring OSPF on the e0/0 interface of R2 (C)</p> Signup and view all the answers

What step is missing to achieve the goal of R1 pinging the Loopback0 interface of R2?

<p>Configuring OSPF on the e0/0 interface of R1 (D)</p> Signup and view all the answers

What is needed for R2 to receive a single summary route 172.16.100.0/22 for networks 172.16.100.0/24, 172.16.101.0/24, and 172.16.103.0/24?

<p>Configuring a summary route on R2 (B)</p> Signup and view all the answers

What command should be configured on R2 to allow the ASNs to interwork with each other?

<p>ldp mapping-server (B)</p> Signup and view all the answers

Which configuration is required on R2 to enable service traffic from R1 to R6 to participate in the LDP and SR domains?

<p>Router2(config)# segment-routing ... (A), Router2(config)# segment-routing ... (B), Router2(config)# segment-routing ... (C), Router2(config)# segment-routing ... (D)</p> Signup and view all the answers

What does the command 'neighbor 192.168.1.2 remote-as 65516' in the BGP configuration signify?

<p>It sets up a BGP neighbor relationship with remote AS 65516. (A)</p> Signup and view all the answers

What does the 'permit ^65516$' statement in the AS path access list signify?

<p>It matches any AS path that starts and ends with 65516. (A)</p> Signup and view all the answers

Flashcards

What is the RPF interface for the IP address 10.1.255.241?

It identifies the VLAN interface associated with the given IP address.

Which multicast group does the IP address 10.88.184.101 belong to?

It tells you the multicast group that the IP address belongs to.

What is the Reason given for the rejection of (10.8.148.101, 239.192.0.1)?

This message indicates how the router determined the source of the packet.

Which Routing Table entry provides information about 10.1.255.241/32?

It provides information about the route to the destination network, including its distance, metric, and type.

Signup and view all the flashcards

What configuration is missing to establish an OSPF neighbor adjacency between R1 and R2?

OSPF must be configured on the interface connecting R1 and R2 to establish an adjacency.

Signup and view all the flashcards

What step is missing to achieve the goal of R1 pinging the Loopback0 interface of R2?

OSPF must be configured on the e0/0 interface of R1 for it to communicate with R2 and send pings.

Signup and view all the flashcards

What is needed for R2 to receive a single summary route 172.16.100.0/22 for networks 172.16.100.0/24, 172.16.101.0/24, and 172.16.103.0/24?

A summary route must be configured on R2 to advertise a single route for the subnet.

Signup and view all the flashcards

What command should be configured on R2 to allow the ASNs to interwork with each other?

This command allows the ASNs to exchange routing information.

Signup and view all the flashcards

Which configuration is required on R2 to enable service traffic from R1 to R6 to participate in the LDP and SR domains?

This configuration enables service traffic from R1 to R6 to participate in the LDP and SR domains.

Signup and view all the flashcards

What does the command 'neighbor 192.168.1.2 remote-as 65516' in the BGP configuration signify?

This command configures a BGP neighbor relationship with the specified remote AS number.

Signup and view all the flashcards

What does the 'permit ^65516$' statement in the AS path access list signify?

This statement allows only AS paths that start and end with the AS number 65516.

Signup and view all the flashcards

Use Quizgecko on...
Browser
Browser