BCSP Certification Exam Prep
120 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the term for the total number of protons present in the nucleus of an atom?

  • Atomic Mass
  • Atomic Number (correct)
  • Mole
  • Molecular Weight

    • What is the quantity of a substance that contains as many particles as there are atoms in 0.012 kilogram of carbon-12?

  • Molecular Weight
  • Atomic Number
  • Atomic Mass
  • Mole (correct)

    • What is the relationship between the volume of a gas and its pressure at constant temperature?

  • Inversely proportional (correct)
  • Directly proportional
  • Directly proportional squared
  • Inversely proportional squared

    • What is the ideal gas law equation?

    <p>PV = nRT</p> Signup and view all the answers

    What is the unit of measurement for the concentration of a gas or vapor?

    <p>All of the above</p> Signup and view all the answers

    What is the term for the average concentration of a substance over a period of time?

    <p>Time-weighted average</p> Signup and view all the answers

    What is the term for the minimum concentration of a substance that can be ignited?

    <p>Lower flammability limit</p> Signup and view all the answers

    What is the conversion factor for converting pressure units to atmospheric pressure units?

    <p>All of the above</p> Signup and view all the answers

    What is the term used to describe the pressure exerted by a fluid at equilibrium?

    <p>Hydrostatic Pressure</p> Signup and view all the answers

    What is the term used to describe the pressure of a fluid in motion?

    <p>Velocity Head</p> Signup and view all the answers

    What is the principle that states that the total energy of a fluid in motion remains constant?

    <p>Bernoulli's Principle</p> Signup and view all the answers

    What is the term used to describe the pressure loss due to friction in a fluid flow?

    <p>Pressure Drop</p> Signup and view all the answers

    What is the term used to describe the sum of the pressure and velocity of a fluid?

    <p>Total Head</p> Signup and view all the answers

    What is the law that states that the pressure of a fluid is proportional to the height of the fluid column?

    <p>Torricelli's Law</p> Signup and view all the answers

    What is the term used to describe the flow rate of a fluid?

    <p>Flow Rate</p> Signup and view all the answers

    What is the principle that states that the pressure of a fluid at a given point is equal in all directions?

    <p>Pascal's Law</p> Signup and view all the answers

    What is the International Standard Book Number-13 of the book?

    <p>978-0-367-26363-8</p> Signup and view all the answers

    Which company is the publisher of the book?

    <p>CRC Press</p> Signup and view all the answers

    What is the main purpose of using ventilation?

    <p>To control contaminants in the air</p> Signup and view all the answers

    What is the address of the publisher?

    <p>6000 Broken Sound Parkway NW, Suite 300</p> Signup and view all the answers

    In which year was the book published?

    <p>2020</p> Signup and view all the answers

    What type of ventilation involves the removal of contaminants from a specific area?

    <p>Local (exhaust) ventilation</p> Signup and view all the answers

    What is the term for the calculation of the volume of air required to dilute contaminants to a safe level?

    <p>Volumetric air flow</p> Signup and view all the answers

    What is the name of the copyright holder?

    <p>Taylor &amp; Francis Group, LLC</p> Signup and view all the answers

    What is the purpose of the Copyright Clearance Center, Inc.?

    <p>To provide licenses and registration for a variety of users</p> Signup and view all the answers

    What type of ventilation hood is used to capture contaminants from a specific area, such as a workstation?

    <p>Canopy hood</p> Signup and view all the answers

    What is the purpose of a duct in a ventilation system?

    <p>To distribute air to various areas</p> Signup and view all the answers

    What is the website to access for permission to photocopy or use material electronically?

    <p><a href="http://www.copyright.com">www.copyright.com</a></p> Signup and view all the answers

    What type of business is Informa?

    <p>Not-for-profit</p> Signup and view all the answers

    What is the term for the measurement of air flow velocity?

    <p>Anemometry</p> Signup and view all the answers

    What is the purpose of a pitot tube in ventilation measurement?

    <p>To measure air flow velocity</p> Signup and view all the answers

    What is the term for the rate at which contaminants are generated in a given area?

    <p>Rate of generation</p> Signup and view all the answers

    What percentage of the ASP Examination Blueprint is dedicated to Mathematics?

    <p>18%</p> Signup and view all the answers

    What is the minimum qualification to sit for the CSP Examination?

    <p>Both Academic Requirements and Professional Safety Experience</p> Signup and view all the answers

    What is the percentage of the CSP Examination Blueprint dedicated to Emergency Preparedness, Fire Prevention, and Security?

    <p>10.59%</p> Signup and view all the answers

    What is the main purpose of the ASP/CSP Process?

    <p>To obtain certification as a safety professional</p> Signup and view all the answers

    How many domains are there in the ASP Examination Blueprint?

    <p>7</p> Signup and view all the answers

    What is the percentage of the ASP Examination Blueprint dedicated to Environmental Management?

    <p>15%</p> Signup and view all the answers

    What is the main purpose of the Examination Blueprint?

    <p>To outline the content of the ASP/CSP Examinations</p> Signup and view all the answers

    What is the percentage of the CSP Examination Blueprint dedicated to Risk Management?

    <p>14.49%</p> Signup and view all the answers

    What percentage of the ASP Examination Blueprint is dedicated to Safety Management Systems?

    <p>23%</p> Signup and view all the answers

    Which of the following domains is NOT part of the ASP Examination Blueprint?

    <p>Law and Ethics</p> Signup and view all the answers

    What is the percentage of the CSP Examination Blueprint dedicated to Advanced Sciences and Math?

    <p>9.95%</p> Signup and view all the answers

    How many domains are there in the CSP Examination Blueprint?

    <p>9</p> Signup and view all the answers

    What is the percentage of the ASP Examination Blueprint dedicated to Occupational Health?

    <p>11%</p> Signup and view all the answers

    Which of the following is a domain in the ASP Examination Blueprint?

    <p>Ergonomics</p> Signup and view all the answers

    What is the percentage of the CSP Examination Blueprint dedicated to Management Systems?

    <p>13.34%</p> Signup and view all the answers

    What is the percentage of the ASP Examination Blueprint dedicated to Fire Prevention and Protection?

    <p>10%</p> Signup and view all the answers

    What is the principle that states that the total energy of a fluid in motion remains constant?

    <p>Bernoulli's Principle</p> Signup and view all the answers

    What is the term used to describe the pressure exerted by a fluid at equilibrium?

    <p>Hydrostatic Pressure</p> Signup and view all the answers

    What is the term used to describe the sum of the pressure and velocity of a fluid?

    <p>Velocity Head</p> Signup and view all the answers

    What is the law that states that the pressure of a fluid is proportional to the height of the fluid column?

    <p>Pascal's Law</p> Signup and view all the answers

    What is the term used to describe the flow rate of a fluid?

    <p>Flow Rate</p> Signup and view all the answers

    What is the principle that states that the pressure of a fluid at a given point is equal in all directions?

    <p>Hydrostatic Pressure Principle</p> Signup and view all the answers

    What is the term used to describe the pressure loss due to friction in a fluid flow?

    <p>Head Loss</p> Signup and view all the answers

    What is the term used to describe the calculation of the volume of air required to dilute contaminants to a safe level?

    <p>Dilution Ventilation</p> Signup and view all the answers

    What is the purpose of obtaining written permission from the publisher?

    <p>To photocopy or use material electronically</p> Signup and view all the answers

    What is the role of the Copyright Clearance Center, Inc.?

    <p>To provide licenses and registration for various users</p> Signup and view all the answers

    What is the consequence of not obtaining written permission from the publisher?

    <p>Legal action can be taken against the user</p> Signup and view all the answers

    What is the website to access for permission to photocopy or use material electronically?

    <p><a href="http://www.copyright.com">www.copyright.com</a></p> Signup and view all the answers

    What type of business is Informa?

    <p>A business conglomerate</p> Signup and view all the answers

    What is the address of the publisher?

    <p>6000 Broken Sound Parkway NW, Suite 300, Boca Raton, FL 33487-2742</p> Signup and view all the answers

    What is the International Standard Book Number-13 of the book?

    <p>978-0-367-26363-8</p> Signup and view all the answers

    Who is the publisher of the book?

    <p>CRC Press</p> Signup and view all the answers

    What is the term for the total number of protons present in the nucleus of an atom?

    <p>Atomic Number</p> Signup and view all the answers

    What is the relationship between the volume of a gas and its temperature at constant pressure?

    <p>Directly proportional</p> Signup and view all the answers

    What is the term for the minimum concentration of a substance that can be ignited?

    <p>Lower Flammability Limit</p> Signup and view all the answers

    What is the unit of measurement for the concentration of a gas or vapor?

    <p>Parts per million (ppm)</p> Signup and view all the answers

    What is the term for the average concentration of a substance over a period of time?

    <p>Time-Weighted Average</p> Signup and view all the answers

    What is the conversion factor for converting pressure units to atmospheric pressure units?

    <p>1013.25 mbar</p> Signup and view all the answers

    What is the term for the calculation of the volume of air required to dilute contaminants to a safe level?

    <p>Dilution Ventilation</p> Signup and view all the answers

    What is the purpose of the Universal Gas Constant?

    <p>To calculate the ideal gas law</p> Signup and view all the answers

    What is the purpose of general ventilation?

    <p>To reduce the concentration of contaminants in the air</p> Signup and view all the answers

    What type of ventilation involves the removal of contaminants from a specific area?

    <p>Local ventilation</p> Signup and view all the answers

    What is the formula to calculate the volumetric air flow?

    <p>Q = AV</p> Signup and view all the answers

    What is the purpose of a canopy hood?

    <p>To capture contaminants from a specific area</p> Signup and view all the answers

    What is the term for the calculation of the rate at which contaminants are generated in a given area?

    <p>Contaminant generation rate</p> Signup and view all the answers

    What is the purpose of a pitot tube?

    <p>To measure air flow velocity</p> Signup and view all the answers

    What is the term for the pressure exerted by a fluid in motion?

    <p>Velocity pressure</p> Signup and view all the answers

    What is the purpose of a fan in a ventilation system?

    <p>To increase the air flow velocity</p> Signup and view all the answers

    What is the primary purpose of the Copyright Clearance Center, Inc.?

    <p>To provide licenses and registration for a variety of users</p> Signup and view all the answers

    What is the primary purpose of obtaining permission from the publisher?

    <p>To reprint, reproduce, transmit, or utilize material in any form</p> Signup and view all the answers

    What is the purpose of the International Standard Book Number-13?

    <p>To uniquely identify the book</p> Signup and view all the answers

    What is the purpose of the publisher's address?

    <p>To contact the publisher for permission to photocopy or use material electronically</p> Signup and view all the answers

    What is the purpose of the publication year?

    <p>To determine the validity of the information</p> Signup and view all the answers

    What is the purpose of the copyright notice?

    <p>To acknowledge the intellectual property rights of the author</p> Signup and view all the answers

    What is the purpose of the disclaimer statement?

    <p>To limit the liability of the publisher</p> Signup and view all the answers

    What is the purpose of the International Standard Book Number-13 on the book?

    <p>To uniquely identify the book</p> Signup and view all the answers

    What percentage of the ASP Examination Blueprint is dedicated to Ergonomics?

    <p>13%</p> Signup and view all the answers

    What is the minimum qualification to sit for the ASP examination?

    <p>A Bachelor's degree in a safety-related field</p> Signup and view all the answers

    How many domains are there in the CSP Examination Blueprint?

    <p>9</p> Signup and view all the answers

    What percentage of the CSP Examination Blueprint is dedicated to Environmental Management Systems?

    <p>7.38%</p> Signup and view all the answers

    What is the main purpose of the ASP/CSP Process?

    <p>To evaluate the knowledge and skills of safety professionals</p> Signup and view all the answers

    What percentage of the ASP Examination Blueprint is dedicated to Safety Management Systems?

    <p>23%</p> Signup and view all the answers

    What is the main purpose of the Examination Blueprint?

    <p>To outline the topics and percentages of the ASP/CSP examinations</p> Signup and view all the answers

    What percentage of the CSP Examination Blueprint is dedicated to Advanced Application of Key Safety Concepts?

    <p>14.69%</p> Signup and view all the answers

    What is the term for the pressure of a fluid at a given point in a state of equilibrium?

    <p>Hydrostatic pressure</p> Signup and view all the answers

    What is the principle that states that the sum of the pressure and velocity of a fluid is constant?

    <p>Bernoulli's principle</p> Signup and view all the answers

    What is the term for the pressure loss due to friction in a fluid flow?

    <p>Head loss</p> Signup and view all the answers

    What is the law that states that the pressure of a fluid is proportional to the height of the fluid column?

    <p>Pascal's law</p> Signup and view all the answers

    What is the term for the flow rate of a fluid?

    <p>Volume flow rate</p> Signup and view all the answers

    What is the principle that states that the pressure of a fluid at a given point is equal in all directions?

    <p>Isotropic principle</p> Signup and view all the answers

    What is the term for the sum of the pressure and velocity head of a fluid?

    <p>Total head</p> Signup and view all the answers

    What is the law that states that the velocity of a fluid is proportional to the square root of the height of the fluid column?

    <p>Torricelli's law</p> Signup and view all the answers

    What is the purpose of a receiving hood in local exhaust ventilation?

    <p>To capture contaminants from a specific area</p> Signup and view all the answers

    What is the term for the calculation of the rate at which contaminants are generated in a given area?

    <p>Contaminant generation rate</p> Signup and view all the answers

    What is the purpose of a pitot tube in ventilation measurement?

    <p>To measure air flow velocity</p> Signup and view all the answers

    What is the term for the pressure loss due to friction in a fluid flow?

    <p>Entry loss</p> Signup and view all the answers

    What is the purpose of a duct in a ventilation system?

    <p>To transport air from the hood to the fan</p> Signup and view all the answers

    What is the term for the measurement of the volume of air required to dilute contaminants to a safe level?

    <p>Volumetric air flow</p> Signup and view all the answers

    What is the purpose of a fan in a ventilation system?

    <p>To create a pressure difference</p> Signup and view all the answers

    What is the term for the calculation of the air flow velocity required to capture contaminants from a specific area?

    <p>Capture velocity</p> Signup and view all the answers

    What is the relationship between the volume of a gas and its temperature at constant pressure?

    <p>Directly proportional</p> Signup and view all the answers

    What is the unit of measurement for the concentration of a gas or vapor?

    <p>Both A and B</p> Signup and view all the answers

    What is the term for the average concentration of a substance over a period of time?

    <p>Time-weighted average</p> Signup and view all the answers

    What is the term for the minimum concentration of a substance that can be ignited?

    <p>Lower flammability limit</p> Signup and view all the answers

    What is the conversion factor for converting pressure units to atmospheric pressure units?

    <p>All of the above</p> Signup and view all the answers

    What is the ideal gas law equation?

    <p>PV = nRT</p> Signup and view all the answers

    What is the term for the calculation of the volume of air required to dilute contaminants to a safe level?

    <p>Dilution ventilation</p> Signup and view all the answers

    What is the term for the rate at which contaminants are generated in a given area?

    <p>Generation rate</p> Signup and view all the answers

    Study Notes

    Board of Certified Safety Professionals

    • The Board of Certified Safety Professionals has definitions and requirements for the ASP and CSP examinations.

    Minimum Qualifications to Sit for the ASP Examination

    • Academic requirements: [insert specific requirements]
    • Professional safety experience: [insert specific requirements]

    Minimum Qualifications to Sit for the CSP Examination

    • Academic requirements: [insert specific requirements]
    • Professional safety experience requirements: [insert specific requirements]

    ASP/CSP Process

    • The ASP/CSP process involves an examination blueprint that outlines the domains and percentages of each domain.

    Examination Blueprint

    • Associate Safety Professional (ASP) Examination Blueprint:
      • Domain #1: Mathematics (18%)
      • Domain #2: Safety Management Systems (23%)
      • Domain #3: Ergonomics (13%)
      • Domain #4: Fire Prevention and Protection (11%)
      • Domain #5: Occupational Health (11%)
      • Domain #6: Environmental Management (15%)
      • Domain #7: Training, Education, and Communication (9%)
    • Certified Safety Professional (CSP) Examination Blueprint:
      • Domain #1: Advanced Sciences and Math (9.95%)
      • Domain #2: Management Systems (13.34%)
      • Domain #3: Risk Management (14.49%)
      • Domain #4: Advanced Application of Key Safety Concepts (14.69%)
      • Domain #5: Emergency Preparedness, Fire Prevention, and Security (10.59%)
      • Domain #6: Occupational Health and Ergonomics (12.05%)
      • Domain #7: Environmental Management Systems (7.38%)
      • Domain #8: Training and Education (10.18%)
      • Domain #9: Law and Ethics (7.33%)

    Particulates and Gases

    • The periodic table of the elements lists elements by their atomic number and atomic mass.
    • Atomic number is the number of protons in an atom's nucleus.
    • Atomic mass is the total number of protons and neutrons in an atom's nucleus.
    • Atoms are the building blocks of matter and are made up of protons, neutrons, and electrons.
    • Chemical bonding occurs when atoms share or exchange electrons.
    • Moles are a unit of measurement that represents 6.022 x 10^23 particles.
    • Molecules are groups of atoms that are chemically bonded together.
    • Mixtures are combinations of two or more substances that are not chemically bonded together.
    • Chemical formulas represent the types and numbers of atoms in a molecule.
    • Atomic weight of compounds is the total number of atoms in a molecule multiplied by their atomic mass.
    • Percentage of element in a compound (by weight) is the percentage of the total weight of the compound that is made up of a particular element.
    • Acids, bases, and pH's are related to the concentration of hydrogen ions in a solution.
    • Gas laws, such as Boyle's Law, Charles' Law, and the Ideal Gas Law, describe the behavior of gases.
    • Concentrations of vapors, gases, and particulates can be calculated using formulas.
    • Standard temperature and pressure (STP) are standard conditions used to calculate concentrations.
    • Time-weighted average (TWA) is a measure of the average concentration of a substance over a period of time.
    • Calculating PELs/TLVs for periods greater than 8 hours involves multiplying the TWA by the number of hours.
    • Gaseous mixtures can be calculated using formulas.
    • Liquid mixtures can be calculated using formulas.
    • Percentage of TLV mixture can be calculated using formulas.
    • Converting mg/m3 to ppm and vice versa involves using formulas.
    • Lower flammability limit (LFL) of mixtures can be calculated using formulas.

    Water Properties

    • Hydrostatic pressure is the pressure exerted by a fluid at equilibrium.
    • Torricelli's Law describes the relationship between the pressure of a fluid and its height.
    • Head pressure is the pressure exerted by a fluid at a certain height.
    • Velocity head is the pressure exerted by a fluid in motion.
    • Velocity pressure at constant laminar velocity can be calculated using formulas.
    • Flow rates and pressure drops can be calculated using formulas.
    • Bernoulli's Principle describes the relationship between the pressure and velocity of a fluid.
    • Key information to remember on hydrostatics and hydraulics includes formulas and concepts related to pressure and flow.

    Ventilation

    • Purpose of ventilation: to remove contaminants and provide a safe working environment.
    • Types of ventilation: general ventilation, dilution ventilation, and local (exhaust) ventilation.
    • General concepts of ventilation notes: ventilation is used to remove contaminants, and there are different types of ventilation.
    • Principles of air movement: air movement is necessary for ventilation, and it can be calculated using formulas.
    • Calculating volumetric air flow: the volume of air flowing through a ventilation system can be calculated using formulas.
    • Calculating static pressure, velocity pressure, and total pressure: these pressures can be calculated using formulas.
    • Calculating velocity of air: the velocity of air can be calculated using formulas.
    • Contaminant generation: contaminants can be generated through various means, such as chemical reactions.
    • Calculating purge rates: the rate at which contaminants are removed from an area can be calculated using formulas.
    • Steady-state concentration: the concentration of a contaminant in an area can be calculated using formulas.
    • Calculating rate of generation for liquid solvents: the rate at which a contaminant is generated from a liquid solvent can be calculated using formulas.
    • Calculating vapor or gaseous concentrations: the concentration of a vapor or gas can be calculated using formulas.
    • Calculating room air changes: the number of air changes in a room can be calculated using formulas.
    • Calculating concentration of a contaminant with dilution ventilation: the concentration of a contaminant can be calculated using formulas.
    • Local exhaust ventilation: used to remove contaminants at the source.
    • Canopy hood: a type of local exhaust ventilation hood.
    • Down draft hood: a type of local exhaust ventilation hood.
    • Enclosure hood: a type of local exhaust ventilation hood.
    • Receiving hood: a type of local exhaust ventilation hood.
    • Openings: openings in a ventilation system can affect its performance.
    • Calculating hood entry losses: the losses in a ventilation system can be calculated using formulas.
    • Calculating air flow velocity: the velocity of air in a ventilation system can be calculated using formulas.
    • Calculating capture velocity for plain opening hood: the velocity of air required to capture contaminants can be calculated using formulas.
    • Ducts: used to transport air in a ventilation system.
    • Fans: used to move air in a ventilation system.
    • Calculating static pressure of the fan (SPh): the static pressure of the fan can be calculated using formulas.
    • Air-cleaning devices: used to remove contaminants from the air.
    • Ventilation measurement equipment: used to measure the performance of a ventilation system.
    • Pitot tubes: used to measure the velocity of air.
    • Rotating vane anemometers: used to measure the velocity of air.
    • Thermal anemometers: used to measure the velocity of air.
    • Key information to remember on ventilation: formulas and concepts related to ventilation.

    Board of Certified Safety Professionals

    • The Board of Certified Safety Professionals has definitions and requirements for the ASP and CSP examinations.

    Minimum Qualifications to Sit for the ASP Examination

    • Academic requirements: [insert specific requirements]
    • Professional safety experience: [insert specific requirements]

    Minimum Qualifications to Sit for the CSP Examination

    • Academic requirements: [insert specific requirements]
    • Professional safety experience requirements: [insert specific requirements]

    ASP/CSP Process

    • The ASP/CSP process involves an examination blueprint that outlines the domains and percentages of each domain.

    Examination Blueprint

    • Associate Safety Professional (ASP) Examination Blueprint:
      • Domain #1: Mathematics (18%)
      • Domain #2: Safety Management Systems (23%)
      • Domain #3: Ergonomics (13%)
      • Domain #4: Fire Prevention and Protection (11%)
      • Domain #5: Occupational Health (11%)
      • Domain #6: Environmental Management (15%)
      • Domain #7: Training, Education, and Communication (9%)
    • Certified Safety Professional (CSP) Examination Blueprint:
      • Domain #1: Advanced Sciences and Math (9.95%)
      • Domain #2: Management Systems (13.34%)
      • Domain #3: Risk Management (14.49%)
      • Domain #4: Advanced Application of Key Safety Concepts (14.69%)
      • Domain #5: Emergency Preparedness, Fire Prevention, and Security (10.59%)
      • Domain #6: Occupational Health and Ergonomics (12.05%)
      • Domain #7: Environmental Management Systems (7.38%)
      • Domain #8: Training and Education (10.18%)
      • Domain #9: Law and Ethics (7.33%)

    Particulates and Gases

    • The periodic table of the elements lists elements by their atomic number and atomic mass.
    • Atomic number is the number of protons in an atom's nucleus.
    • Atomic mass is the total number of protons and neutrons in an atom's nucleus.
    • Atoms are the building blocks of matter and are made up of protons, neutrons, and electrons.
    • Chemical bonding occurs when atoms share or exchange electrons.
    • Moles are a unit of measurement that represents 6.022 x 10^23 particles.
    • Molecules are groups of atoms that are chemically bonded together.
    • Mixtures are combinations of two or more substances that are not chemically bonded together.
    • Chemical formulas represent the types and numbers of atoms in a molecule.
    • Atomic weight of compounds is the total number of atoms in a molecule multiplied by their atomic mass.
    • Percentage of element in a compound (by weight) is the percentage of the total weight of the compound that is made up of a particular element.
    • Acids, bases, and pH's are related to the concentration of hydrogen ions in a solution.
    • Gas laws, such as Boyle's Law, Charles' Law, and the Ideal Gas Law, describe the behavior of gases.
    • Concentrations of vapors, gases, and particulates can be calculated using formulas.
    • Standard temperature and pressure (STP) are standard conditions used to calculate concentrations.
    • Time-weighted average (TWA) is a measure of the average concentration of a substance over a period of time.
    • Calculating PELs/TLVs for periods greater than 8 hours involves multiplying the TWA by the number of hours.
    • Gaseous mixtures can be calculated using formulas.
    • Liquid mixtures can be calculated using formulas.
    • Percentage of TLV mixture can be calculated using formulas.
    • Converting mg/m3 to ppm and vice versa involves using formulas.
    • Lower flammability limit (LFL) of mixtures can be calculated using formulas.

    Water Properties

    • Hydrostatic pressure is the pressure exerted by a fluid at equilibrium.
    • Torricelli's Law describes the relationship between the pressure of a fluid and its height.
    • Head pressure is the pressure exerted by a fluid at a certain height.
    • Velocity head is the pressure exerted by a fluid in motion.
    • Velocity pressure at constant laminar velocity can be calculated using formulas.
    • Flow rates and pressure drops can be calculated using formulas.
    • Bernoulli's Principle describes the relationship between the pressure and velocity of a fluid.
    • Key information to remember on hydrostatics and hydraulics includes formulas and concepts related to pressure and flow.

    Ventilation

    • Purpose of ventilation: to remove contaminants and provide a safe working environment.
    • Types of ventilation: general ventilation, dilution ventilation, and local (exhaust) ventilation.
    • General concepts of ventilation notes: ventilation is used to remove contaminants, and there are different types of ventilation.
    • Principles of air movement: air movement is necessary for ventilation, and it can be calculated using formulas.
    • Calculating volumetric air flow: the volume of air flowing through a ventilation system can be calculated using formulas.
    • Calculating static pressure, velocity pressure, and total pressure: these pressures can be calculated using formulas.
    • Calculating velocity of air: the velocity of air can be calculated using formulas.
    • Contaminant generation: contaminants can be generated through various means, such as chemical reactions.
    • Calculating purge rates: the rate at which contaminants are removed from an area can be calculated using formulas.
    • Steady-state concentration: the concentration of a contaminant in an area can be calculated using formulas.
    • Calculating rate of generation for liquid solvents: the rate at which a contaminant is generated from a liquid solvent can be calculated using formulas.
    • Calculating vapor or gaseous concentrations: the concentration of a vapor or gas can be calculated using formulas.
    • Calculating room air changes: the number of air changes in a room can be calculated using formulas.
    • Calculating concentration of a contaminant with dilution ventilation: the concentration of a contaminant can be calculated using formulas.
    • Local exhaust ventilation: used to remove contaminants at the source.
    • Canopy hood: a type of local exhaust ventilation hood.
    • Down draft hood: a type of local exhaust ventilation hood.
    • Enclosure hood: a type of local exhaust ventilation hood.
    • Receiving hood: a type of local exhaust ventilation hood.
    • Openings: openings in a ventilation system can affect its performance.
    • Calculating hood entry losses: the losses in a ventilation system can be calculated using formulas.
    • Calculating air flow velocity: the velocity of air in a ventilation system can be calculated using formulas.
    • Calculating capture velocity for plain opening hood: the velocity of air required to capture contaminants can be calculated using formulas.
    • Ducts: used to transport air in a ventilation system.
    • Fans: used to move air in a ventilation system.
    • Calculating static pressure of the fan (SPh): the static pressure of the fan can be calculated using formulas.
    • Air-cleaning devices: used to remove contaminants from the air.
    • Ventilation measurement equipment: used to measure the performance of a ventilation system.
    • Pitot tubes: used to measure the velocity of air.
    • Rotating vane anemometers: used to measure the velocity of air.
    • Thermal anemometers: used to measure the velocity of air.
    • Key information to remember on ventilation: formulas and concepts related to ventilation.

    Board of Certified Safety Professionals

    • The Board of Certified Safety Professionals has definitions and requirements for the ASP and CSP examinations.

    Minimum Qualifications to Sit for the ASP Examination

    • Academic requirements: [insert specific requirements]
    • Professional safety experience: [insert specific requirements]

    Minimum Qualifications to Sit for the CSP Examination

    • Academic requirements: [insert specific requirements]
    • Professional safety experience requirements: [insert specific requirements]

    ASP/CSP Process

    • The ASP/CSP process involves an examination blueprint that outlines the domains and percentages of each domain.

    Examination Blueprint

    • Associate Safety Professional (ASP) Examination Blueprint:
      • Domain #1: Mathematics (18%)
      • Domain #2: Safety Management Systems (23%)
      • Domain #3: Ergonomics (13%)
      • Domain #4: Fire Prevention and Protection (11%)
      • Domain #5: Occupational Health (11%)
      • Domain #6: Environmental Management (15%)
      • Domain #7: Training, Education, and Communication (9%)
    • Certified Safety Professional (CSP) Examination Blueprint:
      • Domain #1: Advanced Sciences and Math (9.95%)
      • Domain #2: Management Systems (13.34%)
      • Domain #3: Risk Management (14.49%)
      • Domain #4: Advanced Application of Key Safety Concepts (14.69%)
      • Domain #5: Emergency Preparedness, Fire Prevention, and Security (10.59%)
      • Domain #6: Occupational Health and Ergonomics (12.05%)
      • Domain #7: Environmental Management Systems (7.38%)
      • Domain #8: Training and Education (10.18%)
      • Domain #9: Law and Ethics (7.33%)

    Particulates and Gases

    • The periodic table of the elements lists elements by their atomic number and atomic mass.
    • Atomic number is the number of protons in an atom's nucleus.
    • Atomic mass is the total number of protons and neutrons in an atom's nucleus.
    • Atoms are the building blocks of matter and are made up of protons, neutrons, and electrons.
    • Chemical bonding occurs when atoms share or exchange electrons.
    • Moles are a unit of measurement that represents 6.022 x 10^23 particles.
    • Molecules are groups of atoms that are chemically bonded together.
    • Mixtures are combinations of two or more substances that are not chemically bonded together.
    • Chemical formulas represent the types and numbers of atoms in a molecule.
    • Atomic weight of compounds is the total number of atoms in a molecule multiplied by their atomic mass.
    • Percentage of element in a compound (by weight) is the percentage of the total weight of the compound that is made up of a particular element.
    • Acids, bases, and pH's are related to the concentration of hydrogen ions in a solution.
    • Gas laws, such as Boyle's Law, Charles' Law, and the Ideal Gas Law, describe the behavior of gases.
    • Concentrations of vapors, gases, and particulates can be calculated using formulas.
    • Standard temperature and pressure (STP) are standard conditions used to calculate concentrations.
    • Time-weighted average (TWA) is a measure of the average concentration of a substance over a period of time.
    • Calculating PELs/TLVs for periods greater than 8 hours involves multiplying the TWA by the number of hours.
    • Gaseous mixtures can be calculated using formulas.
    • Liquid mixtures can be calculated using formulas.
    • Percentage of TLV mixture can be calculated using formulas.
    • Converting mg/m3 to ppm and vice versa involves using formulas.
    • Lower flammability limit (LFL) of mixtures can be calculated using formulas.

    Water Properties

    • Hydrostatic pressure is the pressure exerted by a fluid at equilibrium.
    • Torricelli's Law describes the relationship between the pressure of a fluid and its height.
    • Head pressure is the pressure exerted by a fluid at a certain height.
    • Velocity head is the pressure exerted by a fluid in motion.
    • Velocity pressure at constant laminar velocity can be calculated using formulas.
    • Flow rates and pressure drops can be calculated using formulas.
    • Bernoulli's Principle describes the relationship between the pressure and velocity of a fluid.
    • Key information to remember on hydrostatics and hydraulics includes formulas and concepts related to pressure and flow.

    Ventilation

    • Purpose of ventilation: to remove contaminants and provide a safe working environment.
    • Types of ventilation: general ventilation, dilution ventilation, and local (exhaust) ventilation.
    • General concepts of ventilation notes: ventilation is used to remove contaminants, and there are different types of ventilation.
    • Principles of air movement: air movement is necessary for ventilation, and it can be calculated using formulas.
    • Calculating volumetric air flow: the volume of air flowing through a ventilation system can be calculated using formulas.
    • Calculating static pressure, velocity pressure, and total pressure: these pressures can be calculated using formulas.
    • Calculating velocity of air: the velocity of air can be calculated using formulas.
    • Contaminant generation: contaminants can be generated through various means, such as chemical reactions.
    • Calculating purge rates: the rate at which contaminants are removed from an area can be calculated using formulas.
    • Steady-state concentration: the concentration of a contaminant in an area can be calculated using formulas.
    • Calculating rate of generation for liquid solvents: the rate at which a contaminant is generated from a liquid solvent can be calculated using formulas.
    • Calculating vapor or gaseous concentrations: the concentration of a vapor or gas can be calculated using formulas.
    • Calculating room air changes: the number of air changes in a room can be calculated using formulas.
    • Calculating concentration of a contaminant with dilution ventilation: the concentration of a contaminant can be calculated using formulas.
    • Local exhaust ventilation: used to remove contaminants at the source.
    • Canopy hood: a type of local exhaust ventilation hood.
    • Down draft hood: a type of local exhaust ventilation hood.
    • Enclosure hood: a type of local exhaust ventilation hood.
    • Receiving hood: a type of local exhaust ventilation hood.
    • Openings: openings in a ventilation system can affect its performance.
    • Calculating hood entry losses: the losses in a ventilation system can be calculated using formulas.
    • Calculating air flow velocity: the velocity of air in a ventilation system can be calculated using formulas.
    • Calculating capture velocity for plain opening hood: the velocity of air required to capture contaminants can be calculated using formulas.
    • Ducts: used to transport air in a ventilation system.
    • Fans: used to move air in a ventilation system.
    • Calculating static pressure of the fan (SPh): the static pressure of the fan can be calculated using formulas.
    • Air-cleaning devices: used to remove contaminants from the air.
    • Ventilation measurement equipment: used to measure the performance of a ventilation system.
    • Pitot tubes: used to measure the velocity of air.
    • Rotating vane anemometers: used to measure the velocity of air.
    • Thermal anemometers: used to measure the velocity of air.
    • Key information to remember on ventilation: formulas and concepts related to ventilation.

    Studying That Suits You

    Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

    Quiz Team

    Related Documents

    W. David Yates - Safety professional's reference and study guide (2020).pdf

    Description

    Prepare for the Board of Certified Safety Professionals (BCSP) exam with this quiz. Test your knowledge on the definitions, minimum qualifications, and academic requirements to sit for the ASP examination.

    More Like This

    BCSP Supplied Equations for Mechanics
    320 questions

    BCSP Supplied Equations for Mechanics

    StablePraseodymium avatar
    StablePraseodymium
    BCSP Certifications: ASP and CSP
    100 questions

    BCSP Certifications: ASP and CSP

    StablePraseodymium avatar
    StablePraseodymium
    BCSP Certification Process
    240 questions

    BCSP Certification Process

    StablePraseodymium avatar
    StablePraseodymium
    BCSP Procedures and Health Organizations
    41 questions

    BCSP Procedures and Health Organizations

    StablePraseodymium avatar
    StablePraseodymium
    Use Quizgecko on...
    Browser
    Open
    Browser
    Browser