Podcast
Questions and Answers
At what speed does ALTA operate on the collective axis?
At what speed does ALTA operate on the collective axis?
- 20 KIAS
- 40 KIAS (correct)
- 30 KIAS
- 60 KIAS
What controller is used for the primary tuning of the VHF radios?
What controller is used for the primary tuning of the VHF radios?
- NAV controller
- Navigation controller
- Audio controller
- COM controller (correct)
What is the use of the CCD with regards to the function of the radios?
What is the use of the CCD with regards to the function of the radios?
- For tuning the VHF radios
- For controlling the COM frequencies
- For displaying the radio frequencies (correct)
- For selecting the audio mode
If an AHRS fails, what control is used to shift a failed AHRS to a non-failed AHRS?
If an AHRS fails, what control is used to shift a failed AHRS to a non-failed AHRS?
What happens to the cabin audio facilities when the Audio Mode selector is in the back-up position?
What happens to the cabin audio facilities when the Audio Mode selector is in the back-up position?
When the ATT button on the cyclic is pressed, what status will the helicopter be placed in?
When the ATT button on the cyclic is pressed, what status will the helicopter be placed in?
What happens to an AHRS failure?
What happens to an AHRS failure?
What is the primary means of tuning the VHF radios?
What is the primary means of tuning the VHF radios?
If the ADS 2 has failed, where will the ADS cross appear?
If the ADS 2 has failed, where will the ADS cross appear?
What is the secondary means of tuning the VHF radios?
What is the secondary means of tuning the VHF radios?
What is the result of a VENT FAIL amber CAS caution message?
What is the result of a VENT FAIL amber CAS caution message?
How many switches are required to activate transmission (TX)?
How many switches are required to activate transmission (TX)?
What is the minimum flight/rotor running gross weight?
What is the minimum flight/rotor running gross weight?
How do the QNH or Baro settings work on the DCP or altimetre selection?
How do the QNH or Baro settings work on the DCP or altimetre selection?
Can the pilot use the CCD for frequency changing?
Can the pilot use the CCD for frequency changing?
What effect does a VENT FAIL, NOSE FAN 1 OFF, and NOSE FAN 2 OFF failure have on the flight?
What effect does a VENT FAIL, NOSE FAN 1 OFF, and NOSE FAN 2 OFF failure have on the flight?
Which panel must the pilot use when the AHRS has failed?
Which panel must the pilot use when the AHRS has failed?
What is the result of pushing the DH button test in the DCP?
What is the result of pushing the DH button test in the DCP?
