Podcast
Questions and Answers
According to the text, what is the value of y for the SA-516 material at an operating temperature of 250°C?
According to the text, what is the value of y for the SA-516 material at an operating temperature of 250°C?
- 0.4 (correct)
- 0.6
- 0.5
- 0.7
What is the minimum required thickness, in millimeters, of the superheater outlet header operating at 510°C with a MAWP of 17 MPa?
What is the minimum required thickness, in millimeters, of the superheater outlet header operating at 510°C with a MAWP of 17 MPa?
- 20.04 mm
- 15.78 mm
- 5.26 mm (correct)
- 10.52 mm
What is the minimum thickness required for a seamless steel feedwater pipe of material SA-335-P1, with an outside diameter of 168.28 mm, operating pressure of 5200 kPa, and temperature of 510°C?
What is the minimum thickness required for a seamless steel feedwater pipe of material SA-335-P1, with an outside diameter of 168.28 mm, operating pressure of 5200 kPa, and temperature of 510°C?
- 282.16 mm
- 211.37 mm
- 70.79 mm (correct)
- 141.58 mm
According to the ASME BPVC I PG-27.2.2 equation, how can the minimum shell thickness be determined?
According to the ASME BPVC I PG-27.2.2 equation, how can the minimum shell thickness be determined?
What is the equation used to determine the minimum shell thickness according to the ASME BPVC I PG-27.2.2?
What is the equation used to determine the minimum shell thickness according to the ASME BPVC I PG-27.2.2?
What is the purpose of monitoring the corrosion in the boiler?
What is the purpose of monitoring the corrosion in the boiler?
What additional consideration must be given when ordering a pipe?
What additional consideration must be given when ordering a pipe?
According to ASME BPVC Section 1, PG-27.2.2, what are the different equations used to calculate the minimum required thickness for tubing and piping?
According to ASME BPVC Section 1, PG-27.2.2, what are the different equations used to calculate the minimum required thickness for tubing and piping?
According to ASME BPVC Section 1, PG-27.2.2, what are the different equations used to calculate the MAWP for tubing and piping?
According to ASME BPVC Section 1, PG-27.2.2, what are the different equations used to calculate the MAWP for tubing and piping?
In Example 3, what is the minimum required thickness, in millimetres, of the welded boiler drum with an inside diameter of 1.5 m?
In Example 3, what is the minimum required thickness, in millimetres, of the welded boiler drum with an inside diameter of 1.5 m?
