413 - Red Tag/ Yellow Tag Issue and Removal

• The Chesapeake Fire Department issues "Red Tags" and "Yellow Tags" to reduce the risk of fire and life-safety code violations.
• Any device or appliance deemed unsafe by Fire Department personnel will be placed out of service and a Red Tag will be issued.
• The owner or responsible party will be advised of the circumstances and the appliance/device cannot be used until repaired/replaced.
• A Red Tag survey must be completed while on-scene and Chesapeake Development and Permits will be notified.
• The Red Tag shall not be removed until the defective equipment is properly repaired or removed from service.
• Any fire suppression/detection system that presents a risk to life will be deemed unreliable and a Yellow Tag will be issued.
• The owner or responsible party will be advised of the circumstances and a fire watch must be maintained until the system is back online.
• A Yellow Tag survey must be completed while on-scene and Community Risk Reduction will be notified.
• The Yellow Tag and fire watch shall not be removed until the system has been properly repaired and documentation reviewed by the Fire Marshal.
• Replacement or repair of a fire suppression/detection system may require a permit and plans review through Community Risk Reduction.

Are you familiar with the Red and Yellow Tag system used by the Chesapeake Fire Department to reduce fire and life-safety code violations? Test your knowledge with our quiz and learn about the actions taken by the Fire Department when unsafe devices or appliances are found, and the steps required to repair or replace them. Discover the importance of maintaining fire suppression/detection systems and the role of Community Risk Reduction in the process. Take the quiz now and become an expert on the Red and Yellow Tag system!