Are you an expert in underfloor heating and plumbing installation for house exte...

Installation of Underfloor Heating and Plumbing for House Extension

• The underfloor heating system is being installed in the house extension.
• The pipe work for the underfloor heating manifold is being set up and will be dabbed off the wall.
• The electrician box is positioned 25mm off the wall, which will be plasterboarded before fitting the manifold.
• Copper flowing returns are being used to connect to the boiler as copper could not be used due to the joist's layout.
• Radiator and kitchen plumbing are being installed in Copper.
• Hair fat lagging is used to protect the plumbing from the wall and coldness of the blocks.
• The hot and cold pipes for the kitchen sink are being brought out and will be placed behind the wall.
• The pipes are labeled and connected with an elbow, and copper is being used to run the pipes.
• The pipes are lagged and clipped to the wall to hold them in position.
• The utility sink plumbing will be brought down in the stud work, and copper pipes will be used to feed them.
• The pipes are being brought out in Copper, and hot and cold feeds are being set up in the stud work.
• The ceiling is up, and the plumbing is being done for the bathroom in the next video.