17 Questions
What should the apprentice firefighter do if there is not enough residual volume and pressure left in the hydrant to flow both phases at once?
Run the deck gun at a lower pressure to flow the aerial master stream
What does the apprentice firefighter need to determine when arriving at a simulated incident and spotting a hydrant?
The residual volume and pressure left in the hydrant
What is the purpose of completing a porch drill for an apprentice firefighter?
To develop muscle memory for pulling hose lines
What should an apprentice firefighter do if temporarily transferred to a different firehouse that uses a specific hose load they are unfamiliar with?
Request assistance from another firefighter who is familiar with that hose load
What should an apprentice firefighter do if there is not enough residual volume and pressure in the hydrant to flow both phases at once?
Run the aerial master stream at a lower pressure to conserve water
What is an important aspect of bringing common hose loads knowledge for an apprentice firefighter?
It helps them adapt to different firehouse equipment and procedures
What is one of the main evaluation objectives for an apprentice firefighter related to hose loads?
Demonstrating proficiency in loading and deploying a specific hose load within a set time limit
What should an apprentice firefighter do when asked to pull a backup line off a different engine?
Familiarize themselves with common hose loads in case of such requests
What should the apprentice firefighter do before backflushing the pump?
Contact the Support Services Apparatus Maintenance Captain and ensure availability of replacement intake screens
What should be done if the skill sheet has been performed recently by another shift?
Walk through the skills but do not remove the intake screens and do not flow water for backflushing
What is the purpose of gathering all crew members and reviewing the Back Flushing the Pump section of the manual?
To guide the evaluation of backflushing the pump
What should the apprentice firefighter do to maximize the potential flow from a positive water source?
Flush all intakes and discharges as described in the Back Flushing the Pump Section
What should be done before completing the skill station for backflushing the pump?
Make sure replacement intake screens are available in case any get broken
What action should be taken after removing all steamer connections, intake screens, and discharge caps?
Open all applicable drains
What should be done if any intake screens get broken during backflushing?
Contact the Support Services Apparatus Maintenance Captain and ensure availability of replacement intake screens
What should be explained by the apprentice firefighter after completing the skills successfully?
How to get replacement screens if needed
What action should be taken after flushing all intakes and discharges as described in the Back Flushing the Pump Section?
Reinstall all screens, drains, and caps as appropriate
Test your knowledge and skills on back flushing a CFD engine as an apprentice firefighter. This quiz assesses the ability to back flush the pump and requires reference to the specific section of the manual. It emphasizes individual demonstration in front of the crew and encourages crew participation, practice, and feedback.
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free
