Alberta Basic Licence Drivers Assessment

Alberta Drivers Assessment Key Points

• Basic speed limit outside city on primary highways is 100 km/h unless posted otherwise.
• When backing left, a driver should look over the left shoulder with occasional glances to the front.
• At an intersection with a green right-turn arrow and a red light, a driver may proceed safely in the direction of the arrow without stopping.
• A fully licensed driver in Alberta is suspended after accumulating 12 demerit points.
• When passing a large truck, a driver should return to their lane when the truck is no longer visible in the rear-view mirrors to ensure safety.
• Right turns at red lights require signaling, ensuring no sign prohibits the turn, stopping, looking both ways, and then proceeding.
• A single solid white line between lanes means do not change lanes, as it separates traffic going in the same direction.
• Minimum probationary period for a Class 5 driver under the Graduated Driver Licensing program is 12 months.
• A large "X" on the pavement indicates a railway crossing ahead.
• Collisions must be reported to police if damage exceeds $1,000 or if there are injuries or fatalities.
• Maintain sufficient space when stopping behind a vehicle; reconsider distance at least to allow lane changes.
• If being tailgated, slow down gradually to encourage the other vehicle to pass safely.
• Recovery from a skid involves steering in the direction you want the front of the vehicle to go.
• A vehicle with a maximum speed of 40 km/h must display a "slow-moving vehicle" sign.
• When turning left at a steady green light, do not cross the path of oncoming vehicles unless safe.
• A "Weave Zone" refers to a highway area where exits and entrances are close causing merging of vehicles.
• Road tests may be refused if the vehicle is not mechanically safe.
• It is never permitted to exceed the speed limit while passing other vehicles.
• The speed limit in construction zones must be obeyed at all times.
• Threshold braking in vehicles without anti-lock brakes involves applying even pressure until just before wheels lock.
• A driver must pull over to the right curb and stop when approached by an emergency vehicle.
• Recommended braking for a smooth stop involves applying and easing off pressure just before stopping.
• Seat belts must be worn properly at all times while driving.
• Entering a traffic circle requires the driver to yield to vehicles already in the circle.
• A deceleration lane is designated for reducing speed when exiting a highway.
• On a two-way road, turn left into the nearest lane to the left curb of the one-way road.
• At an uncontrolled “T” intersection, the vehicle on the left must yield to the right.
• To turn left from a one-way road, a driver must be in the left lane nearest the left curb.
• Proper reversing requires looking over the left shoulder through the rear window.
• An acceleration lane helps vehicles merge onto a highway safely.
• A flashing yellow light signals to proceed with caution.
• School zone speed limits apply during specific times: 8:00 A.M. to 9:30 A.M., 11:30 A.M. to 1:30 P.M., and 3:00 P.M. to 4:30 P.M.
• Drivers should safely adjust speed or move lanes when merging, ensuring smooth traffic flow.
• When parked uphill on a two-way road with a curb, turn the front wheels to the right to prevent rollback.
• Approaching a stopped school bus with red lights activated requires drivers to stop and wait until the lights stop flashing.

Test your knowledge on Alberta's basic driving rules and regulations. This quiz evaluates your understanding of speed limits and safe driving practices for passenger vehicles. Prepare for your driver's assessment with these essential questions.