Aeroplane Systems: DEU A and DEU B
30 Questions
2 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the primary function of the DEU-B in the CIDS?

  • To control and monitor various cabin support systems
  • To control the aircraft's aerodynamics
  • To control the Area Call Panels, Attendant Indication Panels, and other systems (correct)
  • To power the aircraft's turbine

What determines which inputs/outputs are used on each DEU-B?

  • The installation of optional systems and cabin layout (correct)
  • The altitude of the aircraft
  • The number of passengers on board
  • The type of aircraft

What is the purpose of the coding switches on each DEU-B connection box?

  • To provide power to the DEU-B
  • To connect the DEU-B to the CIDS data bus
  • To give the installation address of the DEU-B (correct)
  • To monitor the aircraft's turbine

What happens if one connection box is not connected to the CIDS data bus?

<p>The data bus will be interrupted and a related message will be shown (A)</p> Signup and view all the answers

What is the purpose of the Forward Attendant Panel (FAP)?

<p>To control and monitor various cabin support systems (B)</p> Signup and view all the answers

What is found at the end of each DEU-B chain?

<p>A Bus Termination Resistor (BTR) (B)</p> Signup and view all the answers

What is the primary function of the antenna in the Cabin Network System?

<p>To receive signals from wirelessly connected devices and transmit them to the CWLUs (C)</p> Signup and view all the answers

What is the data rate of the Cabin Connector?

<p>Up to 100 Mbps (B)</p> Signup and view all the answers

Which system does the Cabin Network System NOT interface with?

<p>Aircraft Engine Control System (B)</p> Signup and view all the answers

What is the purpose of the Passenger Air-to-Ground Telephone/Fax System?

<p>To enable passengers to fax during flight (B)</p> Signup and view all the answers

What is the primary function of the Ethernet Switch Unit (ESU) in the CNS?

<p>To control the interfaces between the Cabin Network System units and devices (D)</p> Signup and view all the answers

What type of capability should Personnel Electronic Devices (PEDs) have to connect to the cabin wireless system?

<p>IEEE 802.3 (D)</p> Signup and view all the answers

What is the Satellite Communication system used for in the Passenger Air-to-Ground Telephone/Fax System?

<p>To enable transmission to the ground (C)</p> Signup and view all the answers

What is the function of the fax machine in the Cabin Network System?

<p>To establish voice and data connections to the public telephone network (B)</p> Signup and view all the answers

What is the frequency range of the RF signals operated by the antenna CWLU?

<p>2.4 to 2.5 GHz (A)</p> Signup and view all the answers

What is the primary function of the Cabin Network Server Unit (CNSU) in the CNS?

<p>To process and store data and files (D)</p> Signup and view all the answers

What is the purpose of the Centralised Maintenance Computer (CMC) in the CNS?

<p>To monitor the system integrity and provide defect reports (A)</p> Signup and view all the answers

What is the function of the Cabin Wireless LAN Unit (CWLU) in the CNS?

<p>To supply the aircraft cabin with a wireless network (C)</p> Signup and view all the answers

What happens to the NS, FSB, and EXIT signs in the event of a rapid decompression?

<p>They come on automatically. (D)</p> Signup and view all the answers

How does the CIDS control cabin illumination?

<p>Through push-button switches on the FAP. (B)</p> Signup and view all the answers

What triggers the EVAC signalling system?

<p>Either the cockpit EVAC panel or the FAP or AAP. (D)</p> Signup and view all the answers

What is the function of the DEU-As?

<p>To activate passenger signs. (A)</p> Signup and view all the answers

How does the Cabin Pressure Controller respond to a rapid decompression?

<p>It provides a discrete signal to the DIR. (D)</p> Signup and view all the answers

What is the function of the Decoder/Encoder Unit Type-A in an aircraft?

<p>To control passenger-related systems (C)</p> Signup and view all the answers

What is the purpose of the aural signal in the EVAC signalling system?

<p>To signal the start of an evacuation. (B)</p> Signup and view all the answers

How many DEU-As are installed in the A380's baseline configuration?

<p>85 (B)</p> Signup and view all the answers

What connects the DEU-As to the DIRs?

<p>A CIDS data-bus (A)</p> Signup and view all the answers

Why are there two top line data buses on each side of the left, centre, and right seat aisles?

<p>For redundancy purposes (C)</p> Signup and view all the answers

What is installed in each DEU-A connection box?

<p>Coding switches (B)</p> Signup and view all the answers

What is contained in the end connection box of each chain?

<p>A Bus Termination Resistor (BTR) (B)</p> Signup and view all the answers

More Like This

Use Quizgecko on...
Browser
Browser