Abrasive Wear of Brittle Material Quiz
8 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the assumption regarding contact between two surfaces in terms of asperities?

  • The contact is limited to half of the individual asperity contact areas.
  • The contact area is inversely proportional to the normal load.
  • The contact occurs where asperities touch, and the true area of contact is equal to the sum of individual asperity contact areas. (correct)
  • The contact occurs only when the surfaces are perfectly smooth.

Which factor plays a major role in a material's resistance to corrosive wear?

  • Surface roughness
  • Applied load
  • Material properties (correct)
  • Temperature

What type of deformation is expected for the asperities during contact?

  • No deformation
  • Plastic deformation (correct)
  • Elastic deformation
  • Permanent deformation

What is the subject of Tribochemistry?

<p>Chemical reactions occurring in the contacting zone (C)</p> Signup and view all the answers

What significantly impacts the wear rate in corrosive environments?

<p>Type of relative motion (C)</p> Signup and view all the answers

What will the true area of contact between surfaces be proportional to?

<p>Normal load (B)</p> Signup and view all the answers

Which factor significantly affects the rate of wear and protective layer formation?

<p>Relative motion (A)</p> Signup and view all the answers

What plays a major role in determining a material's resistance to corrosive wear?

<p>Material properties (D)</p> Signup and view all the answers

More Like This

Use Quizgecko on...
Browser
Open
Browser
Browser