Podcast
Questions and Answers
/ip route can have DS flags simultaneously.
/ip route can have DS flags simultaneously.
False (B)
When using routing option 'check-gateway=ping' what is the ICMP echo request interval
(in seconds)?
When using routing option 'check-gateway=ping' what is the ICMP echo request interval (in seconds)?
- 60s
- 20s
- 30s
- 10s (correct)
In OSPF interface configuration what effect will a “passive=yes” option have on a
specific interface ?
In OSPF interface configuration what effect will a “passive=yes” option have on a specific interface ?
- It will prevent all traffic through that interface
- It will prevent all OSPF traffic through that interface (correct)
- It will prevent routes learned through the interface from being listed in the routing table
- It will action a mirroring of all routing upgrades to that interface
If one of two gateways is unreachable in an ECMP route with check gateway set, 50% of
packets will be lost .
If one of two gateways is unreachable in an ECMP route with check gateway set, 50% of packets will be lost .
There is no way to establish OSPF adjacency when the link doesn't support multicast
traffic
There is no way to establish OSPF adjacency when the link doesn't support multicast traffic
To assign specific traffic to a route – traffic must be identified by a routing mark. Each
packet can only have one routing mark.
To assign specific traffic to a route – traffic must be identified by a routing mark. Each packet can only have one routing mark.
In case it is not administratively defined, how is OSPF Router ID determined?
In case it is not administratively defined, how is OSPF Router ID determined?
It is possible to create a configuration where VLAN and PPTP interfaces are bridged
together.
It is possible to create a configuration where VLAN and PPTP interfaces are bridged together.
Which routing table is used to apply recursive routing at MikroTik RouterOS
Which routing table is used to apply recursive routing at MikroTik RouterOS
Which static-route rule will have priority for destination 192.168.0.18?
Which static-route rule will have priority for destination 192.168.0.18?
Flashcards
DS flags in /ip route
DS flags in /ip route
Simultaneous DS flags are not possible in /ip route.
ICMP echo request interval (check-gateway=ping)
ICMP echo request interval (check-gateway=ping)
The ICMP echo request interval is 10 seconds when using the 'check-gateway=ping' routing option.
OSPF passive interface effect
OSPF passive interface effect
The 'passive=yes' option on an OSPF interface prevents OSPF traffic from passing through that interface.
ECMP gateway unavailability and packet loss
ECMP gateway unavailability and packet loss
Signup and view all the flashcards
OSPF adjacency and multicast
OSPF adjacency and multicast
Signup and view all the flashcards
Multiple routing marks per packet
Multiple routing marks per packet
Signup and view all the flashcards
OSPF router ID default
OSPF router ID default
Signup and view all the flashcards
VLAN and PPTP bridging
VLAN and PPTP bridging
Signup and view all the flashcards
Recursive routing table (MikroTik)
Recursive routing table (MikroTik)
Signup and view all the flashcards
Static route priority (destination 192.168.0.18)
Static route priority (destination 192.168.0.18)
Signup and view all the flashcards
