Mikrotik MTCRE-01

Play an AI-generated podcast conversation about this lesson

When sending out an ARP request, an IP host is expecting what kind of address for an answer?

VLAN ID
802.11g
MAC Address (correct)
IP address (correct)

When adding a static route, you must always ensure that you add both the gateway and the interface.

False (B)

A MikoTik PPPoE Server can be used only within a broadcast domain, that is, users can not run PPPoE protocol with a server if there is a router between the customer and that PPPoE server.

True (A)

Router A and B are both running as PPPoE servers on different broadcast domains of your network. Is it possible to set Router A to use “/ppp secret” accounts from Router B to authenticate PPPoE customers ?

False (B) Signup and view all the answers

What is the protocol number used by the EoIP tunnel, to encapsulate Ethernet frames and send them to the remote side of the EoIP tunnel

47 (A) Signup and view all the answers

ECMP provides:

per connection load balancing to multiple (B) Signup and view all the answers

A MikroTik system administrator implemented OSPF Routing protocol in the network. But realized that he has a static route on the routers. What can be done to make the static route work as a failover whenever the dynamic routing protocol fails.

He should increase the administrative distance of the static route (B) Signup and view all the answers

When adding a user to your local ppp secrets/ppp profiles database, it is possible to:

Allow/deny use of more than one login by this user (A), Allow login by pppoe and pptp, but deny login by l2tp (C), Set max values for total transferred bytes (up- and download) (D), Allow only pppoe login (B) Signup and view all the answers

If ‘check-gateway’ is enabled for an ECMP route and one of the gateways is unreachable, then

the unreachable gateway is not going be used in Round Robin algorithm (C) Signup and view all the answers

You want to create a route to the network 192.168.0.0/24. Which of the following is a legal gateway?

pppoe-out1 (B), 192.168.0.1 (C), ether1 (D) Signup and view all the answers

ARP Request Answer

An ARP request is a network request for the physical (MAC) address of a device, given its IP address. The response (answer) provides the MAC address.

Static Route Gateway & Interface

When setting up a static route, you need to specify both the gateway IP address and the interface on which the packet should leave for the destination network.

PPPoE Server Broadcast Domain

A PPPoE server typically operates within a single broadcast domain; a router between the server and customer would prevent PPPoE connections.