new.pdf

Questions and Answers PDF 1/43 Product Questions: 151 Version: 4.0 Question: 1 Which three of the following actions are native log entry actions? (Choose three.) A. add a tag to the log entry B. continue...

Questions and Answers PDF 1/43 Product Questions: 151 Version: 4.0 Question: 1 Which three of the following actions are native log entry actions? (Choose three.) A. add a tag to the log entry B. continue rule processing but do not save C. halt further rule processing for the log entry D. send an email notification Answer: A, B, C Question: 2 If a NetFlow collector service is showing a “down” status, which two of the following steps are possible troubleshooting options? (Choose two.) A. Confirm the database connection is up and server has free resources. B. Delete and re-add NetFlow collector service. C. Start or restart SolarWinds’ collector service. D. Start or restart SolarWinds’ NetFlow service from Orion service manager. Answer: A, D Question: 3 What is the minimum amount of RAM required for setting up log collection in hybrid cloud observability? A. 4 GB B. GB C. 16 GB D. 32 GB Answer: C https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 2/43 Question: 4 A universal device poller (UDP) was created on the main polling engine to collect CPU temperature for routers polled by the main polling engine and switches polled by the additional polling engine. It is noted that statistics from the switches are missing. What is the likely cause of the missing statistics? A. routers are not monitored on the additional polling engine B. switches are not monitored in the additional polling engine C. UDPs are tied to polling engine on which they are hosted D. UDPs do not work with additional polling engines Answer: C Question: 5 A probe is to be built to test connections to Office 365 from two different locations. How would this be accomplished? A. Create a probe, duplicate it, and change the source agent to the agent in another location. B. Create both probes on hybrid cloud observability (HCO) server and designate each location. C. Create two probes and assign each to an agent in each location. D. Create two probes and assign each to an agent in one location. Answer: C Question: 6 Flow data is not generating from a device in the web console. Wireshark was used to confirm the flows are being sent from the device to the poller and not blocked by the firewall. Why is the data not showing in the web console? A. device is not monitored by hybrid cloud observability (HCO) features B. device is using IPv6 and HCO only supports IPv4 C. missing source address field in flow configurations D. flow monitoring was not enabled as device type in web console settings Answer: C Question: 7 Which two of the following tasks must be accomplished to monitor servers and connections in a load-balancing environment? (Choose two.) A. add Cisco Nexus device in network device configuration manager B. add Cisco Nexus device in network health / performance monitoring C. enable CLI polling D. enable F5 iControl polling Answer: B, D Question: 8 What is a possible result of decreasing the top talking optimization value? https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 3/43 A. increased storage requirement B. reduced database performance C. reduced page load times D. slower reporting speed Answer: A Question: 9 Which two of the following troubleshooting steps can be performed when a node is “up” and the data cannot be found in SolarWinds’ platform web console? (Choose two.) A. Add a remote site node and make sure the firewall rules are configured to allow SNMP traffic. B. Ping the device from the polling engine the device is assigned to using the command line. C. Verify hardware health sensors on the device provide both status and values. D. Wait ten minutes after a device is added to the console. Refresh the screen. Answer: B, D Question: 10 Which tool can be used to display the physical layout of interfaces on graphical stencils? A. device studio B. device view C. NetPath D. network insight Answer: B Question: 11 Which two of the following best practices are used when creating a universal device poller (UDP)? (Choose two.) A. Call SolarWinds support for object ID (OID) options. B. Consult vendor documentation for OID. C. Perform SNMPwalk to determine if OID exists. D. Run WBemtest to test communication to OID. Answer: B, C Question: 12 A poller is to be built that will add two values together to show a single value in the web console using the universal device poller (UDP) tool. How would this be accomplished? A. add both object IDs (OIDs) to the poller and combine values in a single value for the web console B. build a poller for each OID then use transform results to combine values from the two pollers C. UDP tool does not support more than one OID per poller, another OID is needed D. UDP tool does not support more than one OID per poller, another tool is needed Answer: B https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 4/43 Question: 13 Which two of the following flow sources are supported by hybrid cloud observability? (Choose two.) A. Cisco B. cFlow C. J-Flow D. NetStream Answer: A, C Question: 14 Which two of the following statements explain creating alerts for NBAR2 applications? (Choose two.) A. Applications and NBAR2 applications in top applications are sorted by bits. B. Applications and NBAR2 applications in top applications are sorted by bytes. C. It is not possible to combine applications and NBAR2 applications. D. It is possible to combine applications and NBAR2 applications. Answer: B, D Question: 15 Which port allows log analysis in the SolarWinds platform to accept secure syslog messages? A. TCP port 601 B. TCP port 6514 C. UDP port 514 D. UDP port 10514 Answer: B Question: 16 Which three of the following traffic flow protocols (supported by hybrid cloud observability’s flow monitoring) support flow sampling? (Choose three.) A. Cisco NetFlow B. IPF1X C. NetFlow Lite D. NetFlow V1 Answer: A, B, C Question: 17 Which custom filter allows a user to view specific statistics about an entire network and its devices without having to navigate through the web console by single-device views? A. flow alert B. flow navigator https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 5/43 C. NBAR2 D. top 10 applications Answer: B Question: 18 Which three of the following data points does NetFlow use to confirm traffic is in the same flow? (Choose three.) A. interface name B. IP address C. L3 protocol D. port number Answer: B, C, D Question: 19 Which custom poller supports multiple object IDs (OIDs)? A. component monitor B. device studio C. hardware health D. universal device poller (UDP) Answer: D Question: 20 Which custom poller supports interface traffic, UPS battery status, and CPU temperature? A. device studio B. hardware health C. universal device poller D. visualization integration Answer: C Question: 21 An unknown traffic event is noted in the web console. What is the likely cause? A. a firewall is blocking the traffic flow configurations B. incorrectly configured source or destination port in the flows C. missing a byte group from flow field configurations D. receiving flows from a device not monitored by the network Answer: D Question: 22 What can be done to show the description of an object ID (OID)? https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 6/43 A. Contact vendor to obtain the latest SNMPwalk. B. Download the latest OlD.cfq from customer portal. C. Perform an SNMPwalk on the tarqet device. D. Update the MIB database via SolarWinds support. Answer: C Question: 23 Which NetFlow component can be applied to an interface to track IPv4 traffic? A. flow exporter B. flow monitor C. flow record D. Iflow sampler Answer: B Question: 24 It is noted that the hardware health monitoring for a Cisco switch is generating false positives. It is verified that the alerted hardware issues are not occurring. What is causing the issue? A. Hardware sensors were incorrectly assigned to another switch. B. MIB on the device is not the preferred MIB that is being polled. C. Modify the widget thresholds to filter out the false positives. D. Restart SNMP on the device to refresh the hardware statistics. Answer: B Question: 25 Which SNMP version allows usernames and passwords? A. version 1 B. version 2c C. version 3 D. version 4 Answer: C Question: 26 Which port needs to be open in order to analyze flow and monitor CBQoS? A. Flow (SNMP, 161), CBQoS (TCP, 2055) B. Flow (SNMP, 161), CBQoS (UDP, 2055) C. Flow (TCP, 2055), CBQoS (SNMP, 161) D. Flow (UDP, 2055), CBQoS (SNMP, 161) https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 7/43 Answer: D Question: 27 If the data collected for hardware health is incorrect, which step could rectify the issue? A. Change the MIB tree used for polling. B. Change the poller assigned to sensor. C. Create a custom goller in device studio for fan speed, power supply, and temperature. D. Download the MIB file from the SolarWinds website and add it to the device's firmware. Answer: A Question: 28 If an IP address group is hidden in IP address groups management, what impact will it have on the data? A. group historical data will be deleted B. group will be shown in compliance reports C. group will not be shown in charts or reports D. group will not be shown in IPAM Answer: C Question: 29 In which two of the following cases does duplicate flow data occur? (Choose two.) A. both IP flow ingress and egress applied for all interfaces B. both IP flow ingress and egress applied on one interface C. IP flow ingress applied on all interfaces, no egress usage D. IP flow ingress on some interfaces and egress on others Answer: A, B Question: 30 Several resources are showing duplicate flow dat a. What is the most likely cause? A. interfaces have duplicate entries in flow sources management B. interfaces in flow sources management are set to drop C. SolarWinds' NetFlow service needs to be restarted D. source devices are configured to export flow data on ingress and egress Answer: D Question: 31 SNMP get type defines the SNMP polling method used by a universal device poller (UDP) to get the device’s object ID (OID) values. Which SNMP get type retrieves values from a particular column? A. column https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 8/43 B. data C. next D. table Answer: D Question: 32 It is noted in flow source view that some devices are showing “never received” in the last received flow column. It is verified that the flows are not being blocked by a firewall. What is the likely cause? A. flows are IPv6 and not supported by the network monitoring features B. interface is no longer monitored by the network monitoring features C. node is no longer monitored by the monitoring features D. a primary field of data is missing and being dropped Answer: D Question: 33 Which two of the following flow technologies are supported? (Choose two.) A. GFlow B. HFlow C. J-Flow D. sFlow Answer: C, D Question: 34 One NetPath probe is showing a “no data found” error, however other probes are returning data without issue. What is the most likely resolution? A. add the probe ID to the engines table manually B. delete the probe, reinstall the agent manually, and re-add the probe C. probe was added in NetPath without an agent installed on its node D. restart the SolarWinds agent service on the node Answer: B Question: 35 Which two of the following Windows versions are supported for log collection in hybrid cloud observability? (Choose two.) A. Windows 10 B. Windows server 2012 C. Windows server 2019 D. Windows Vista Answer: A, C Question: 36 https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 9/43 From which two of the following locations can the status of the flow collector service be checked? (Choose two.) A. flow and CBQoS sources B. NetFlow collector services C. NetFlow settinqs D. top XX receivers Answer: B, C Question: 37 Which two of the following processing policies are processed independently and at the same time? (Choose two.) A. global post B. global pre C. svslog D. traps Answer: C, D Question: 38 Which tool presents live flow traffic data sourced from / to a main polling engine server, providing basic insight into traffic on the main polling engine? A. CBQoS/flow sources B. collector service C. flow navigator D. local NetFlow source Answer: D Question: 39 Which method is used to add new UPS battery status statistics onto an existing node that does not have the default value polled? A. create new custom device poller B. custom statistics cannot be added to 3n existing node C. define custom statistic with universal device poller (UnDP) D. update SolarWinds' MIB database Answer: C Question: 40 SNMP traps are being received from several devices. While most of the traps are normal, traps from one of the devices contain fields that are unreadable. The device is not being monitored in any other way. Which two of the following points should be checked? (Choose two.) A. Verify the device is not using SNMFV3 and is added as a node. B. Verity the device supports hybrid cloud https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 10/43 C. Verify the device supports SNMP and is added as a node. D. Verify the device's MIBfile is in SolarWinds' MIB database. Answer: C, D Question: 41 What is the unit of data used for alerting on flows? A. bPs B. gps C. mbps D. ms Answer: A Question: 42 On a single node, one or more interfaces are showing an “unknown” status. What is the best way to resolve the issue? A. Change node's polling method to ICMP. B. Delete and rediscover the node showing affected interfaces. C. Delete and re-add the affected interfaces. D. Verify the interfaces are assigned to SolarWinds' native poller. Answer: C Question: 43 What is the correct sequence of steps to create a device studio poller? A. Assign the poller to node, select the technology, specify the data source, and save the poller. B. Select the technology, assign the poller to node, specify the data source, and save the poller. C. Select the technology, specify the data source, assign the poller to node, and save the poller. D. Select the technology, specify the data source, save the poller, and assign the poller to node. Answer: D Question: 44 Network wide node and interface changes were recently made to several fields including names and IP addresses on nodes, captions, and aliases for their interfaces. Those changes are not updated in the hybrid cloud observability web console, even if a new polling is forced. What should be done to resolve the issue? A. Delete and re-add each of the nodes and their interfaces. B. Manually update the changed information in each poller. C. Run a rediscovery on both nodes and interfaces to refresh the data. D. Run a rediscovery on the node, which will also update the interfaces. Answer: C https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 11/43 Question: 45 Which additional polling method is needed after adding Cisco ASA and Cisco Nexus for SNMP monitoring? A. API B. ICLI C. Control D. WMI Answer: B Question: 46 A universal device poller (UDP) is being built for a metric to monitor in a radial gauge of a web console. When a gauge resource in the poller is to be selected, it is found that the resource is grayed out. What could be causing this? A. object ID (OID) polled does not support radial gauge. B. OID polled is not in current MIB file of MIB database. C. OID polled is not supported by the device. D. UDP does not support gauges to display polled information. Answer: A Question: 47 Event logs are to be collected from Windows servers in order to be analyzed in hybrid cloud observability. Which two of the following actions must be taken in order to accomplish this ask? (Choose two.) A. configure a rule on hybrid cloud observability to poll the server and collect logs B. configure a rule on hybrid cloud observability to read event log folder locations C. configure server to send logs to another server running the platform D. deploy and configure the platform agent to collect the logs Answer: C, D Question: 48 Which statement depicts the relationship between device studio pollers’ supported technologies and universal device pollers’ (UDPs) supported technologies? A. device studio pollers can poll for CPU utilization of SNMP enabled devices, UDPs cannot B. device studio pollers can poll for node details of SNMP enabled devices, UDPs cannot C. UDPs can poll for hardware status of SNMP enabled devices, device studio pollers cannot D. UDPs can poll for memory utilization of SNMP enabled devices, device studio pollers cannot Answer: C Question: 49 A NetPath probe is to be built to monitor the paths between two sites. No Windows servers are available to run the agent. Which two of the following options can be used to set up the probe? (Choose two.) https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 12/43 A. Install the agent on a red hat Linux server. B. Install the agent on a Windows 10 computer. C. Run the probe from the hybrid cloud observability (HCO) server. D. Use the network device agent to run the probe from the router. Answer: B, C Question: 50 A universal device poller (UDP) and a transformer are built to display a transform value for a node’s CPU temperature, however the value is not transformed as displayed on the web console. Which two of the following reasons could have caused the issue? (Choose two.) A. custom poller used for transformation is not assigned to same node B. custom poller and transformer are not using same polling interval C. node polling interval does not match the custom poller interval D. polling interval for the custom poller is using the default value Answer: A, B Question: 51 Which three of the following switch port report errors can cause a duplex mismatch? (Choose three.) A. 100 MB full B. CRC C. > 0.5% receive D. are collision Answer: B, C, D Question: 52 In device studio, which three of the following technologies are supported for custom polling? (Choose three.) A. interface traffic B. multi-CPU / memory C. node details D. single CPU / memory Answer: B, C, D Question: 53 Which two of the following technologies are used when building device studio pollers? (Choose two.) A. CPU and memory load of single processor B. machine type for node details widget C. power supply status for vital statistics view D. VLAN and VRF on a dedicated widget Answer: B, C https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 13/43 Question: 54 A new node has been added to hybrid cloud observability; however, certain data being polled on similar devices is not being polled on the new node. How can this be resolved? A. assign existing universal device poller (UDP) to new node B. assign the new node to the same polling engine C. UDP must be re-created for new node D. verily the credentials for the new node are valid Answer: A Question: 55 Which three of the following setting can be used to customize the thresholds for an object in SolarWinds’ platform? (Choose three.) A. single poll B. X concurrent polls C. X consecutive polls D. X of Y polls Answer: B, C, D Question: 56 Upon examining bandwidth utilization, it is confirmed that the total utilization and flow numbers do not match. What is the likely cause? A. a firewall is blocking the data flow configuration B. flows do not contain all traffic in bandwidth numbers C. receiving both IPv4 and IPv6 flows and not all are counted in total bandwidth D. SNMP bandwidth numbers for the interface need to be adjusted in the console Answer: B Question: 57 What network capacity planning method is suitable for important devices and connections? A. average calculation B. default calculation C. forecast calculation D. peak calculation Answer: D Question: 58 A device studio poller is being built for the node details widget. The plan is to add a field for serial numbers. How would this be accomplished? A. Add the object ID (QID) to an existing data source and edit the field name in the widget. https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 14/43 B. Change one data source field to serial number and supply the OID for the data source. C. Default widgets are being used, fields cannot be added to the device studio D. Create a serial number universal device poller (UDP) and link to the node details widget. Answer: D Question: 59 A node is being polled. The only data visible is response time and packet loss. Detailed statistics are needed. How should this issue be resolved? A. switch polling method from ICMP to SNMP B. switch polling method from SNMP to API C. switch polling method from SNMP to ICMP D. switch polling method from WMI to SNMP Answer: A Question: 60 Which tool in the web console will verify the object ID (OID) being used is a match for the node being created for a custom poller? A. CLI settings B. component library C. firmware repository D. MIB browser Answer: D Question: 61 The below error message is received. How should this error be resolved? A. change the IP address on the node or enable "allow matching nodes by another IP" B. ensure the collector service is up C. ensure the device is configured to send flow data to hybrid cloud observability (HCO) D. only IP flow ingress applied on interfaces Answer: A Question: 62 Which three of the following are effects of enabling the “resolve IPv4 and IPv6 addresses to DNS hostname” option and disabling the “resolve and store IPv4 hostname immediately when a flow record is received” option? (Choose three.) A. amount of database memory used to store DNS information is reduced B. amount of database space used to store received flows is reduced C. DNS names will not be displayed on top domain resources/reports https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 15/43 D. number of reads/writes on SQL server linked to name resolution is reduced Answer: A, C, D Question: 63 Which statement related to flow alerts is true? A. based on custom SQL query B. can be triggered even when NetFlow service is down C. have no trigger actions D. object of the alert selected from create a flow alert panel Answer: A Question: 64 A custom application is to be monitored in hybrid cloud observability’s flow monitoring features. How is this application added for monitoring? A. Add the application ports, then assign it to a machine. B. Add the source or destination machine, then map it to application ports. C. Custom application ports cannot be added they may only be edited. D. Ensure the application is using IPv6 then map it to a source. Answer: B Question: 65 A device studio poller is being built for node detail information. For the values supported, it has been decided to enter textual values instead of object IDs (OIDs). Which statements is true? A. If the textual value changes, it will update automatically. B. If the textual value changes on the node, the poller must be manually updated. C. If the textual value is misspelled, it will not poll correctly. D. Only textual values can be used for host names, all other values must be OlDs. Answer: B Question: 66 Which two of the following points can be checked when the node status is “unknown”? (Choose two.) A. OID B. ping response C. polling method D. view method Answer: B, C Question: 67 https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 16/43 NetFlow and CBQoS monitoring can be disabled through web console settings. If NetFlow monitoring is disabled for a node or interface, the data collection is stopped. Which two of the following statements are true regarding disabling NetFlow monitoring? (Choose two.) A. enabling and disabling flow collection can result in gaps within NTA graphs B. enabling and disabling flow collection will not cause gaps within NTA graphs C. historical data is retained within the database D. historical data is removed from the database Answer: A, C Question: 68 A node has been added to hybrid cloud observability and shows an “unknown” status until the data is polled. The default interval for polling status is two minutes. If the node stays in the “unknown” status longer than the polling interval, which three of the following steps can be performed to resolve the issue? (Choose three.) A. Ping device from assigned polling engine. B. Run SNMP walk on the appropriate node. C. Verify the appropriate polling method is set for this node. D. Verify a ping response for this node is received through the ICMP. Answer: A, C, D Question: 69 Which Cisco IOS feature is enabled to pinpoint an application causing slow network performance? A. IPSLA B. Net Flow C. SNMP D. SPAN Answer: B Question: 70 The status of the parent node of several interfaces is showing red. It is determined that several operationally down and administratively shutdown interfaces are included for monitoring of the parent node. Which menu in the node details summary page of SolarWinds’ platform allows users to remove interfaces that are operationally down and administratively shutdown? A. add alert B. edit node C. List resources D. polling settings Answer: C Question: 71 https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 17/43 Which status rollup mode displays groups defined as collections of redundant or backup devices? A. show best B. show mixed C. show worst D. show zero Answer: A Question: 72 Which three of the following data points directly affect the precision of capacity forecasting? (Choose three.) A. amount of historical data used B. exhaustion calculation method C. polling interval D. warning thresholds Answer: A, B, C Question: 73 Which two of the following requirements apply to network capacity planning? (Choose two.) A. All object IDs (QIDs) of network devices are polled in hybrid cloud B. Enough historical data is available for the last 7 days. C. Nodes, interfaces, and volumes must be managed in HCO. D. Updated MIB database for network performance forecasting. Answer: B, C Question: 74 Which two of the following tools are available for troubleshooting network node connectivity issues? (Choose two.) A. asset inventory B. MIB browser C. NetPath D. network insight Answer: B, C Question: 75 The web console is showing the status of a network router as “down”, however the node is up and running. Which two of the following causes could be creating the issue? (Choose two.) A. agent connection status with the polling engine is "down' B. ICMP is blocked between the device and the polling engine C. router is configured as a parent in a node dependency D. SNMP is blocked between the device and the polling engine https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 18/43 Answer: B, D Question: 76 How is HA mode monitored and configured for site-to-site VPN tunnels within a Cisco ASA firewall? A. Agent > CLI Polling B. SNMP > CLI Polling C. SNMP > ICMP > CLI Polling D. WMI > ICMP > CLI Polling Answer: B Question: 77 Which two of the following technologies does device studio support? (Choose two.) A. baseline and thresholds B. |multi-CPU and memory C. node details D. throughput Answer: B, C Question: 78 Which two of the following requirements must be met to detect duplex mismatches? (Choose two.) A. nodes must be described in MIB B. nodes must be in "up" status C. nodes must be in 'warning' status D. nodes must be monitored Answer: B, D Question: 79 A router has been added for health and performance monitoring in hybrid cloud observability, however default SNMP polling data is not visible. Additional network devices have been added and SNMP metrics for those devices are now visible. How should this issue be resolved? A. Perform a firmware upgrade on the device to update its MIB file. B. Perform an MIB database update and build custom pollers to monitor the device. C. Perform an MIB database update to update the default D. Perform an SNMP walk and add the devices MIB file to SolarWinds' MIB database. Answer: D Question: 80 https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 19/43 To which port does log analyzer forward secure syslog when a log forwarding custom rule action is set to TCP? A. 161 B. 162 C. 514 D. 6514 Answer: D Question: 81 Which switch model is supported in network insight? A. Brocade G620 B. Cisco Nexus C. Juniper EX D. Meraki MX Answer: B Question: 82 Which three of the following devices are supported on SolarWinds’ hybrid cloud observability IP flow monitor? (Choose three.) A. IPF1X B. J-Flow C. nFlow D. sFlow Answer: A, B, D Question: 83 When creating a new rule action, what is the best option to enable if too many events trigger the rule within a short time? A. entry count B. excessive event C. flood protection D. time window Answer: C Question: 84 What is the maximum number of resources that can be displayed in flow charts created by SolarWinds’ platform views? A. 25 B. 50 C. 75 D. 100 Answer: D https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 20/43 Question: 85 When a parent object goes down or becomes unresponsive, all interfaces on the switch will also be unresponsive. Though they may be working, “unreachable” status is used because the parent node reports as “down” and a status cannot be determined. Any alerts where the trigger condition includes node status equal to “down” are not triggered. In which section of SolarWinds’ platform can an administrator configure the status of child objects as “unreachable” instead of “down” or “unknown”? A. core thresholds B. manage dependencies C. node status participation D. polling settings Answer: B Question: 86 Flow traffic in the web console is reviewed and it is noted that there is unclassified traffic. Which two of the following reasons are possible causes for the issue? (Choose two.) A. The flows from the device are generated by an application not mapped in hybrid cloud B. The flows from the device are generated by an application using a different port than what is mapped in HCO. C. The flows from the device are not supported by HCO. D. The flows from the device are set to ingress instead of egress. Answer: A, B Question: 87 If an SNMP community string is changed on a device, which two of the following steps are required to re-establish successful polling on the node? (Choose two.) A. Delete and add the node back into the platform. B. Edit the node properties and save the changes. C. Restart the SNMP service on the source device. D. Update the community string in node properties. Answer: B, D Question: 88 NetPath can be used to diagnose a slow connection caused by an internal network. Details shown on the dashboard will be needed to help diagnose the problem. Which three of the following data points should be considered as possible causes? (Choose three.) A. Date, time, and duration of performance issue. B. Detailed alert description shown on NetPath. C. IP addresses of the nodes in question. D. Latency and packet loss information. Answer: A, C, D https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 21/43 Question: 89 Which three of the following flow protocols does hybrid cloud observability support? (Choose three.) A. J-Flow B. NetFlowv6 C. NetFlowv9 D. sFlow Answer: A, C, D Question: 90 Which option is available when choosing the collect Windows events without an agent so that Windows event logs can be recognized? A. Convert Windows events to log files with SolarWinds event log forwarder. B. Convert Windows events to svslog with SolarWinds event log forwarder. C. Convert Windows events to traps with SolarWinds event log forwarder. D. Convert Windows events to VMware with SolarWinds event log forwarder. Answer: B Question: 91 Through which means does NetFlow traffic analysis (NTA) process flow data? A. agent B. collector C. configuration D. polling method Answer: B Question: 92 Which two of the following advantages apply to choosing to resolve and store IPv4 hostnames immediately when a flow record is received? (Choose two.) A. database query times are decreased B. domain widgets and reports with DNS names run C. endpoint domain name is resolved when requested D. flow views and widgets load faster Answer: B, D Question: 93 Which two of the following actions can be taken to resolve unknown flow traffic events? (Choose two.) A. Add the devices and interfaces to SolarWinds' database. B. Configure devices to send all flow data. C. Enable automatic addition of flow sources. D. Ensure flow-enabled devices send data to appropriate port. https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 22/43 Answer: A, D Question: 94 Which application classification system is used with deep packet inspection technologies to provide better visibility into network traffic and is a mechanism used by certain Cisco routers/switches to recognize dataflow by inspecting some of the packets sent? A. autonomous systems B. CBQoS drops C. flow navigator D. NBAR2 applications Answer: D Question: 95 What can be done to display the average CPU utilization of a node in a web console widget, if the device studio poller returns a table of multi-core CPU utilizations? A. Configure the web console widget to calculate the average of the returned table values. B. Contact the device vendor to provide an SNMP object ID (OID)forthe averaqe CPU utilization statistic. C. Display the returned table of values in the web console widget and manually calculate the average. D. Select the add calculated value option and use the average function for returned values. Answer: D Question: 96 A network router node using ICMP polling has a green status icon and shows basic information (i.e., status) but is not showing more detailed statistics. What might resolve this issue? A. Edit the node properties to verily proper polling credentials. B. Run ping tests to verily communication. C. Switch polling to SNMP to gather additional polling statistics. D. Unmanage and re-manage the node. Answer: C Question: 97 Some of the flows received are mapping to an IP address that does not match any of the nodes being monitored. It has been verified that all flow sources are also being monitored by NPM and SNMP polling. The known source nodes for these flows have the correct IP address. What could be causing this issue? A. flows are coming from a non-primary address and the setting to match the node by another IP is turned off B. flows are IPv6 and the network monitoring does not recognize that version C. IP address for the node is incorrect in SNMP polling but correct in the flows D. source machine field in the flows is not configured and the setting to match the node by another IP is turned off Answer: A https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 23/43 Question: 98 After creating a new device studio poller that appears to be returning values on a test device, it is then applied to additional nodes. One of these new devices is not returning the statistics of the test node. Which two of the following reasons might be the cause of the issue? (Choose two.) A. communication issue exists in new device B. devices have different firmware versions C. new device needs to be rebooted D. object IDs (QIDs) are not supported Answer: B, D Question: 99 Probing interval determines how often and how long information is polled from the network path. Which two of the following statements are true regarding probing intervals? (Choose two.) A. probing less frequently allows the data to update more slowly and increases data accuracy B. probing less frequently allows the data to update faster but decreases data accuracy C. probing more frequently allows the data to update faster but decreases data accuracy D. probing more frequently allows the data to update more slowly and increases data accuracy Answer: A, C Question: 100 How does data collection with a flow collector differ from data collection with a polling engine? A. flow collector is a type of polling engine for flow data B. flow data is collected by flow collector and processed by polling engine C. flow data is processed by flow collector or polling engine D. source devices must be configured to send their data to a flow collector Answer: D Question: 101 A network discovery profile for a network area completes with most devices discovered, except for a few SNMP enabled network devices. These undiscovered devices are verified to be operational and respond to SNMP queries. What could be the cause? A. device MIB is not in SolarWinds' MIB database B. discovery timeout value is set too low C. no SNMP pollers match the device D. SNMP community strings in profile are invalid Answer: D https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 24/43 Question: 102 Which two of the following statistics are available for network capacity planning? (Choose two.) A. disk space forecast B. memory usage data on nodes C. node temperature D. receive utilization on interfaces Answer: B, D Question: 103 The unclassified traffic in the web console has been identified as MSSQL traffic. It is known as an application mapping that hybrid cloud observability maps by default. Which two of the following reasons explain why the traffic is showing as unclassified? (Choose two.) A. A different port is being used. B. A firewall is blocking the traffic. C. The source or the destination port field is not present. D. The version of MSSQL being used is not supported. Answer: A, C Question: 104 In live mode, how frequently is log viewer data automatically refreshed? A. 1 second B. 10 seconds C. 1 minute D. 10 minutes Answer: B Question: 105 Which statement is true regarding universal device pollers (UDP)? A. perform operations /transformations on polled data B. poll multiple object IDs (QIDs) for a given technology C. polled values are displayed in dedicated resources D. polled values are displayed in existing resources Answer: A Question: 106 A “no data” message is displayed in NetFlow charts. How can this be resolved? A. Confirm account has viewing permissions. B. Refresh the current window. C. Restart collector service. D. Shorten the time for view and resource. https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 25/43 Answer: A Question: 107 Which two of the following standards does hybrid cloud observability use to capture flow data and CBQoS data? (Choose two.) A. IP Fix B. J-Flow C. Net Flow D. SNMP Answer: A, C Question: 108 Which tool is used to establish flow alerts? A. create alert flows B. create a flow alert panel C. flow alert wizard D. manage flow alert pane Answer: B Question: 109 In setting up a storage and search retention period for log analyzer, what is the default retention period? A. 24 hours B. 7 days C. 21 days D. 31 days Answer: B Question: 110 A brocade G620 switch is not able to poll for hardware health statistics after adding a node using SNMPv3 as the polling method. Why are hardware health statistics not showing in the node details summary page? A. device does not support SNMFV3 B. MIB database needs to be updated C. switch is not supported for collection D. server configuration box is not checked Answer: C Question: 111 A problem occurred on the main polling engine and the server fails. It is noted that statistics for the networking devices https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 26/43 polled by a universal device poller (UDP) custom monitor are missing. Which two of the following reasons are possible causes of this event? (Choose two.) A. data collection for any UDPs stops on the server B. networking devices are not assigned to the UDP C. UDPs do not collect data from failover or hot standby engines D. UDPs are tied to the polling engine on which they are hosted Answer: A, D Question: 112 Which three of the following technologies are supported to create device studio pollers? (Choose three.) A. multi-CPU / memory B. node details C. single CPU / memory D. VLAN details Answer: A, B, C Question: 113 Which additional polling method is needed after adding an F5 load balancing node for SNMP monitoring? A. API B. CLI C. iControl D. WM1 Answer: C Question: 114 Which two of the following functions are tied to SolarWinds’ MIB database? (Choose two.) A. SolarWinds’ MIB database defines what kind of pollers can be built for the metric. B. SolarWinds’ MIB database enables automatic polling of devices. C. SolarWinds’ MIB database maps object IDs (OIDs) to their textual names. D. aSolarWinds’ MIB database updates OIDs on the device during the polling process. Answer: A, C Question: 115 Which custom poller can display the poller results as a chart, gauge, or table? A. device studio poller B. hardware health C. network insight D. universal device poller (UnDP) Answer: D https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 27/43 Question: 116 In customizing the flow direction of SolarWinds’ platform views, which statement is true? A. Both ingress and egress views are available for the current session only. B. Both ingress and egress views are available for the next two sessions. C. Both ingress and egress views are available for 24 hours. D. Both ingress and egress views are available for 48 hours. Answer: A Question: 117 Which two of the following actions are recommended for more precise forecasting of capacity trends on critical devices? (Choose two.) A. Monitor devices with platform agents. B. More historical data used in calculations. C. Set calculation methods to use average daily values. D. Set warning and critical thresholds to lower percentages. Answer: B, C Question: 118 What is the default amount of historical data needed for calculating capacity forecast? A. 1 to 30 days B. 1 to 90 days C. 7 to 30 days D. 7 to 180 day Answer: D Question: 119 Upon logging into the web console to check node statuses, it is noted that several nodes display a “down” status when they are up and running. Which two of the following situations are the likely causes of this issue? (Choose two.) A. ICMP blocked from polling engine to target node B. node status must be set to au management C. nodes using incorrect SNMP credentials D. polling interval set to value other than default Answer: A, C Question: 120 Which two of the following components are required to successfully create a NetPath probe? (Choose two.) A. connection port B. Linux agent https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 28/43 C. source IP address D. Windows agent Answer: A, D Question: 121 In device studio, the test node being built for a new custom poller is returning four usage values for the CPU (one for each CPU core). If the goal is to have one value for the entire CPU, how can that be accomplished? A. create a new calculated value to average the four individual values B. device studio would not be the correct tool to use in this situation C. there is not an object ID (OJD) for CPU usage, nothing can be done D. values can be combined after the poller is created in poller settings Answer: A Question: 122 Which two of the following locations can hardware health be enabled? (Choose two.) A. asset inventory B. list resources C. main settings D. manage MIB Answer: B, D Question: 123 What is needed to edit trigger conditions in flow alerts? A. PowerShel B. Python C. SQL D. SVVQL Answer: D Question: 124 What is the most efficient way to create a custom NetFlow view to access at a later time? A. Create the view from charting and graphing in NetFlow settings. B. Create the view from flow navigator and click the submit button. C. Create the view from flow navigator and save to the menu bar. D. Create the view from NetFlow settings and save to menu bar. Answer: C Question: 125 Which two of the following actions can be taken to resolve duplicate flows? (Choose two.) https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 29/43 A. Enable the flow de-duplication feature. B. Enable automatic addition of flow sources. C. Ensure NetFlow is enabled for ingress interfaces. D. Ensure NetFlow export is enabled on sub-interfaces. Answer: A, C Question: 126 Which two of the following services can be monitored in network insight with network health, performance monitor, and NCM features installed in hybrid cloud observability? (Choose two.) A. access lists B. global protect VPN C. high availability details D. policy details Answer: B, C Question: 127 It is taking longer than normal for a single mission critical node to poll for dat a. Where would the polling interval for the node be changed? A. Node Details Summary > Edit Node > Polling B. Node Details Summary > Resources > Memory C. Settings > All Setting > Core Thresholds D. Settings > All Settings > Polling Settings Answer: A Question: 128 A node is not able to calculate CPU load threshold. Where in SolarWinds’ platform can a user confirm CPU load is included in the node status calculation? A. core thresholds B custom poller thresholds C. node status contributors D. polling settings Answer: C Question: 129 Which two of the following locations can be checked for network hardware health functionality? (Choose two.) A. device view B. node properties C. list resources D. manage sensors Answer: B, C https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 30/43 Question: 130 The fan of a network device has failed; however, the status shows as “up” on the current hardware health resource in the node details view. Which two of the following causes could be creating the issue? (Choose two.) A. hardware sensors are disabled B. resource is showing outdated information C. threshold of the fan sensor has been forced D. wrong MIB being used for polling Answer: B, D Question: 131 How is an object ID (OID) verified as included in SolarWinds’ MIB database and polled on a device? A. add routers to the additional polling engine B. go to manage pollers and find OID C. run SNMPwalk on the device with the OID D. verify the OID using the MIB browser Answer: D Question: 132 A device studio poller is being built for a router statistic. It is determined that its object ID (OID) does not exist in SolarWinds’ MIB database. What is the best workaround for this situation? A. consult vendor and add OID to the database B. download database from customer portal C. select manually define object identifier and specify SNMP D. select SNMP and ICMP as the router's polling method Answer: C Question: 133 On which two of the following occasions do custom pollers need to be created? (Choose two.) A. monitor equipment that does not support WMI B. monitor special equipment C. monitor specific metric that is not out-of-the-box D. monitor unsupported object ID Answer: B, C Question: 134 Which two of the following data sources can be used for polling devices in device studio? (Choose two.) A. calculated result from transformation of polled values https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 31/43 B. night and day standard deviation of calculated value C. polled value by a device on an object ID D. predicted value from OID baseline Answer: A, C Question: 135 Which SNMP version will support MD5, SHA1, SHA256, and SHA512 authentication in SolarWinds’ platform? A. version 1 B. version 2 C. version 2c D. version 3 Answer: D Question: 136 How are additional collection ports added? A. replace existing port with new port in the NetFlow collector services widget B. separate listed ports with a comma in the NetFlow collector services widget C. stop SolarWinds' NetFlow service and separate listed ports with a comma in the NetFlow collector services widget D. stop SolarWinds' NetFlow service and change the collection port in the NetFlow collector services widget Answer: B Question: 137 Which two of the following effects would apply to a situation where a NetPath probe polling interval is increased to 15 minutes from the default value of 10 minutes? (Choose two.) A. accuracy is decreased B. accuracy is increased C. probe is more likely to show all routes D. probe will not complete successfully Answer: A, C Question: 138 An agent is deployed to the Windows server in order to monitor logs, however logs are not coming in from the related agent. It is confirmed that the agent software is deployed and installed on the target machine. What additional setting needs to be checked? A. correct rule to read logs is configured B. log forwarding feature is enabled C. polling method is set to agent D. polling method is set to WMI Answer: A https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 32/43 Question: 139 Which two of the following requirements are needed to set up network devices and export NetFlow data? (Choose two.) A. Each device can be optionally configured to export NetFlow data to SolarWinds’ NTA. B. Each device that exports NetFlow data to SolarWinds’ NTA must be monitored in NCM. C. Each device that exports NetFlow data to SolarWinds’ NTA must be monitored in NPM. D. The interface through which a device exports NetFlow data must be monitored in NPM. Answer: C, D Question: 140 When attempting to add universal device poller (UDP) results to a new chart widget, none of the custom poller results are displayed. If the web console switches to another view, the data appears in the chart. What is the most likely resolution? A. user does not have correct permissions to view the data B. unassign and reassign custom poller in UDP application C. UDP application under web display, chart box must be checked for each view to be used D. UDP application, click transform results to convert them into a format viewable in a chart Answer: C Question: 141 An existing NetPath probe is examined, and it is noted that the thickness of connection lines is different on various routes between devices. What does this indicate? A. The probing interval for the probe is shorter on one path than on the other. B. The thicker line indicates the more likely path of traffic from source to destination. C. The thicker line is monitored in hybrid cloud observability (HCO) and contains other metrics. D Two probes with different probing intervals are monitoring the same path Answer: B Question: 142 In which scenario would the device studio poller tool be considered the best tool for building a required poller? A. Building a poller for ARP tables to display in the web console. B. Building a poller to add missing information to node details. C. Building a poller to monitor VPN tunnel status. D. Building a poller to show CPU and memory status. Answer: B Question: 143 What is required to submit an MIB database update request to SolarWinds? https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 33/43 A. polling interval to monitor the metric B. SNMP or MIB walk from the device C. specific object ID (QID) for polling D. type of widget to populate data Answer: B Question: 144 Which three of the following steps should be taken to troubleshoot a ‘test failed’ result for SNMP nodes in hybrid cloud observability? (Choose three.) A. Add remote site node and confirm firewall rules are configured to allow SNMP traffic. B. Confirm the use ofSNMPv3 with authentication keys. C. Verify the node can be pinged from the application server. D. Verify the SNMP service on the node has been restarted after changing the community string. Answer: A, C, D Question: 145 Which two of the following reasons should NetFlow data be collected on a company network? (Choose two.) A. authorize user network access B. diagnose slow network performance C. identity applications causing congestion D. report network link up / down instances Answer: B, C Question: 146 Which two of the following reasons explain why device MIB files are important for SNMP polling in hybrid cloud observability? (Choose two.) A. MIB files contain all metrics available for polling on the device. B. MIB files enable automatic discover/ of devices added to hybrid cloud C. MIB files enable hybrid cloud observability to display the metric in a user-friendly format. D. MIB files enable SolarWinds to create object IDs (OlDs) for customers to monitor. Answer: A, B Question: 147 Which two of the following requirements are needed to monitor an application on a server? (Choose two.) A. Add application and ports using server as source and destination IP addresses. B. Add the IP address of the server into an IP address group. C. Click the monitor recommendation applications button. D. Find the application to monitor in the list of available applications and enable it. Answer: A, D https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html  Questions and Answers PDF 34/43 Question: 148 Which two of the following authentication methods are supported when configuring a database log collection in hybrid cloud observability? (Choose two.) A. Kerberos B. mixed mode C. oAUTH D. Windows Answer: A, D Question: 149 To drill down into a log summary for a specific node, where in SolarWinds’ platform can a user view these logs? A. Alerts & Activity > Message Center B. My Dashboard > Logs > Log Viewer C. Node Details Summary > Management > Analyze Logs D. Node Details Summary > Management > List Resources Answer: C Question: 150 On which two of the following port does log analyzer listen for TCP syslog messages? (Choose two.) A. 162 B. 514 C. 1463 D. 6514 Answer: B, C Question: 151 The status of the interfaces for a network switch shows as “unknown” in SolarWinds’ platform web console, although the node status is “up”. What could be the reason? A. hardware sensors are disabled on the node B. ICMP is blocked between the node and the polling engine C. interface details have changed on the device D. interfaces are not managed in hybrid cloud observability (HCO) Answer: C https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html Questions and Answers PDF 35/43 https://www.validexamdumps.com/Hybrid-Cloud-Observability-Network-Monitoring.html