CSI3120A Fall 2023 Lecture 6 PDF

Chapter 7 Expressions and Assignment Statements ISBN 0-321-49362-1 Chapter 7 Topics • • • • • • • • Introduction Arithmetic Expressions Overloaded Operators Type Conversions Relational and Boolean Expressions Short-Circuit Evaluation Assignment Statements Mixed-Mode Assignment Copyright © 2018...

Chapter 7 Expressions and Assignment Statements ISBN 0-321-49362-1 Chapter 7 Topics • • • • • • • • Introduction Arithmetic Expressions Overloaded Operators Type Conversions Relational and Boolean Expressions Short-Circuit Evaluation Assignment Statements Mixed-Mode Assignment Copyright © 2018 Pearson. All rights reserved. 1-2 Introduction • Expressions are the fundamental means of specifying computations in a programming language • To understand expression evaluation, need to be familiar with the orders of operator and operand evaluation • Essence of imperative languages is dominant role of assignment statements Copyright © 2018 Pearson. All rights reserved. 1-3 Arithmetic Expressions • Arithmetic evaluation was one of the motivations for the development of the first programming languages • Arithmetic expressions consist of operators, operands, parentheses, and function calls • In most languages, binary operators are infix, except in Scheme and LISP, in which they are prefix; Perl also has some prefix binary operators • Most unary operators are prefix, but the ++ and –operators in C-based languages can be either prefix or postfix Copyright © 2018 Pearson. All rights reserved. 1-4 Arithmetic Expressions: Design Issues • Design issues for arithmetic expressions – – – – – – Operator precedence rules? Operator associativity rules? Order of operand evaluation? Operand evaluation side effects? Operator overloading? Type mixing in expressions? Copyright © 2018 Pearson. All rights reserved. 1-5 Arithmetic Expressions: Operators • A unary operator has one operand • A binary operator has two operands • A ternary operator has three operands Copyright © 2018 Pearson. All rights reserved. 1-6 Arithmetic Expressions: Operator Precedence Rules • The operator precedence rules for expression evaluation define the order in which “adjacent” operators of different precedence levels are evaluated • Typical precedence levels – – – – – parentheses unary operators ** (if the language supports it) *, / +, - Copyright © 2018 Pearson. All rights reserved. 1-7 Arithmetic Expressions: Operator Associativity Rule • The operator associativity rules for expression evaluation define the order in which adjacent operators with the same precedence level are evaluated • Typical associativity rules – Left to right, except **, which is right to left – Sometimes unary operators associate right to left (e.g., in FORTRAN) • APL is different; all operators have equal precedence and all operators associate right to left • Precedence and associativity rules can be overriden with parentheses Copyright © 2018 Pearson. All rights reserved. 1-8 Expressions in Ruby and Scheme • Ruby – All arithmetic, relational, and assignment operators, as well as array indexing, shifts, and bit-wise logic operators, are implemented as methods - One result of this is that these operators can all be overriden by application programs • Scheme (and Common Lisp) - All arithmetic and logic operations are by explicitly called subprograms - a + b * c is coded as (+ a (* b c)) Copyright © 2018 Pearson. All rights reserved. 1-9 Arithmetic Expressions: Conditional Expressions • Conditional Expressions – C-based languages (e.g., C, C++) – An example: average = (count == 0)? 0 : sum / count – Evaluates as if written as follows: if (count == 0) average = 0 else average = sum /count Copyright © 2018 Pearson. All rights reserved. 1-10 Arithmetic Expressions: Operand Evaluation Order • Operand evaluation order 1. Variables: fetch the value from memory 2. Constants: sometimes a fetch from memory; sometimes the constant is in the machine language instruction 3. Parenthesized expressions: evaluate all operands and operators first 4. The most interesting case is when an operand is a function call Copyright © 2018 Pearson. All rights reserved. 1-11 Arithmetic Expressions: Potentials for Side Effects • Functional side effects: when a function changes a two-way parameter or a non-local variable • Problem with functional side effects: – When a function referenced in an expression alters another operand of the expression; e.g., for a parameter change: a = 10; /* assume that fun changes its parameter */ b = a + fun(&a); Copyright © 2018 Pearson. All rights reserved. 1-12 Functional Side Effects • Two possible solutions to the problem 1. Write the language definition to disallow functional side effects • • • • No two-way parameters in functions No non-local references in functions Advantage: it works! Disadvantage: inflexibility of one-way parameters and lack of non-local references 2. Write the language definition to demand that operand evaluation order be fixed • • Disadvantage: limits some compiler optimizations Java requires that operands appear to be evaluated in left-to-right order Copyright © 2018 Pearson. All rights reserved. 1-13 Referential Transparency • A program has the property of referential transparency if any two expressions in the program that have the same value can be substituted for one another anywhere in the program, without affecting the action of the program result1 = (fun(a) + b) / (fun(a) – c); temp = fun(a); result2 = (temp + b) / (temp – c); If fun has no side effects, result1 = result2 Otherwise, not, and referential transparency is violated Copyright © 2018 Pearson. All rights reserved. 1-14 Referential Transparency (continued) • Advantage of referential transparency – Semantics of a program is much easier to understand if it has referential transparency Copyright © 2018 Pearson. All rights reserved. 1-15 Overloaded Operators • Use of an operator for more than one purpose is called operator overloading • Some are common (e.g., + for int and float) • Some are potential trouble (e.g., * in C and C++) – Loss of compiler error detection (omission of an operand should be a detectable error) – Some loss of readability Copyright © 2018 Pearson. All rights reserved. 1-16 Overloaded Operators (continued) • C++, C#, and F# allow user-defined overloaded operators – When sensibly used, such operators can be an aid to readability (avoid method calls, expressions appear natural) – Potential problems: • Users can define nonsense operations • Readability may suffer, even when the operators make sense Copyright © 2018 Pearson. All rights reserved. 1-17 Type Conversions • A narrowing conversion is one that converts an object to a type that cannot include all of the values of the original type e.g., float to int • A widening conversion is one in which an object is converted to a type that can include at least approximations to all of the values of the original type e.g., int to float Copyright © 2018 Pearson. All rights reserved. 1-18 Type Conversions: Mixed Mode • A mixed-mode expression is one that has operands of different types • A coercion is an implicit type conversion • Disadvantage of coercions: – They decrease in the type error detection ability of the compiler • In most languages, all numeric types are coerced in expressions, using widening conversions • In ML and F#, there are no coercions in expressions Copyright © 2018 Pearson. All rights reserved. 1-19 Explicit Type Conversions • Called casting in C-based languages • Examples – C: (int)angle – F#: float(sum) Note that F#’s syntax is similar to that of function calls Copyright © 2018 Pearson. All rights reserved. 1-20 Errors in Expressions • Causes – Inherent limitations of arithmetic e.g., division by zero – Limitations of computer arithmetic e.g. overflow • Often ignored by the run-time system Copyright © 2018 Pearson. All rights reserved. 1-21 Relational and Boolean Expressions • Relational Expressions – Use relational operators and operands of various types – Evaluate to some Boolean representation – Operator symbols used vary somewhat among languages (!=, /=, ~=, .NE., <>, #) • JavaScript and PHP have two additional relational operator, === and !== - Similar to their cousins, == and !=, except that they do not coerce their operands Copyright © 2018 Pearson. All rights reserved. 1-22 Relational and Boolean Expressions • C89 has no Boolean type--it uses int type with 0 for false and nonzero for true • One odd characteristic of C’s expressions: a < b < c is a legal expression, but the result is not what you might expect: – Left operator is evaluated, producing 0 or 1 – The evaluation result is then compared with the third operand (i.e., c) Copyright © 2018 Pearson. All rights reserved. 1-23 Short Circuit Evaluation • An expression in which the result is determined without evaluating all of the operands and/or operators • Example: (13 * a) * (b / 13 – 1) If a is zero, there is no need to evaluate (b - 1) /13 • Problem with non-short-circuit evaluation index = 0; while (index <= length) && (LIST[index] != value) index++; – When index=length, LIST[index] will cause an indexing problem (assuming LIST is length - 1 long) Copyright © 2018 Pearson. All rights reserved. 1-24 Short Circuit Evaluation (continued) • C, C++, and Java: use short-circuit evaluation for the usual Boolean operators (&& and ||), but also provide bitwise Boolean operators that are not short circuit (& and |) • All logic operators in Ruby, Perl, ML, F#, and Python are short-circuit evaluated • Short-circuit evaluation exposes the potential problem of side effects in expressions e.g. (a > b) || (b++ / 3) Copyright © 2018 Pearson. All rights reserved. 1-25 Assignment Statements • The general syntax <target_var> <assign_operator> <expression> • The assignment operator = Fortran, BASIC, the C-based languages := Ada • = can be bad when it is overloaded for the relational operator for equality (that’s why the C-based languages use == as the relational operator) Copyright © 2018 Pearson. All rights reserved. 1-26 Assignment Statements: Conditional Targets • Conditional targets (Perl) ($flag ? $total : $subtotal) = 0 Which is equivalent to if ($flag){ $total = 0 } else { $subtotal = 0 } Copyright © 2018 Pearson. All rights reserved. 1-27 Assignment Statements: Compound Assignment Operators • A shorthand method of specifying a commonly needed form of assignment • Introduced in ALGOL; adopted by C and the C-based languaes – Example a = a + b can be written as a += b Copyright © 2018 Pearson. All rights reserved. 1-28 Assignment Statements: Unary Assignment Operators • Unary assignment operators in C-based languages combine increment and decrement operations with assignment • Examples sum = ++count (count incremented, then assigned to sum) sum = count++ (count assigned to sum, then incremented count++ (count incremented) -count++ (count incremented then negated) Copyright © 2018 Pearson. All rights reserved. 1-29 Assignment as an Expression • In the C-based languages, Perl, and JavaScript, the assignment statement produces a result and can be used as an operand while ((ch = getchar())!= EOF){…} is carried out; the result (assigned to ch) is used as a conditional value for the while statement • Disadvantage: another kind of expression side effect ch = getchar() Copyright © 2018 Pearson. All rights reserved. 1-30 Multiple Assignments • Perl and Ruby allow multiple-target multiple-source assignments ($first, $second, $third) = (20, 30, 40); Also, the following is legal and performs an interchange: ($first, $second) = ($second, $first); Copyright © 2018 Pearson. All rights reserved. 1-31 Mixed-Mode Assignment • Assignment statements can also be mixed-mode • In Fortran, C, Perl, and C++, any numeric type value can be assigned to any numeric type variable • In Java and C#, only widening assignment coercions are done • In Ada, there is no assignment coercion Copyright © 2018 Pearson. All rights reserved. 1-32 Summary • • • • • Expressions Operator precedence and associativity Operator overloading Mixed-type expressions Various forms of assignment Copyright © 2018 Pearson. All rights reserved. 1-33