Ch 4 Lecture Notes - Chemistry PDF

Lecture Presentation Chapter 4 Reactions in Aqueous Solution © 2012 Pearson Education, Inc.  Solutions Solutions are defined as...

Lecture Presentation Chapter 4 Reactions in Aqueous Solution © 2012 Pearson Education, Inc.  Solutions Solutions are defined as homogeneous mixtures of two or more pure substances. The solvent is present in greatest abundance. All other substances are solutes. Aqueous Reactions © 2012 Pearson Education, Inc. Dissociation When an ionic substance dissolves in water, the solvent pulls the individual ions from the crystal and solvates them. This process is called dissociation. Aqueous Reactions © 2012 Pearson Education, Inc. Dissociation An electrolyte is a substances that dissociates into ions when dissolved in water. Aqueous Reactions © 2012 Pearson Education, Inc.  Solutions An electrolyte is a substance that dissociates into ions when dissolved in water. A nonelectrolyte may dissolve in water, but it does not dissociate into ions when it does so. Aqueous Reactions © 2012 Pearson Education, Inc. Electrolytes and Nonelectrolytes Soluble ionic compounds tend to be electrolytes. Aqueous Reactions © 2012 Pearson Education, Inc. Electrolytes and Nonelectrolytes Molecular compounds tend to be nonelectrolytes, except for acids and bases. Aqueous Reactions © 2012 Pearson Education, Inc.  Electrolytes A strong electrolyte dissociates completely when dissolved in water. A weak electrolyte only dissociates partially when dissolved in water. Aqueous Reactions © 2012 Pearson Education, Inc.  Strong Electrolytes Are… Strong acids Strong bases Aqueous Reactions © 2012 Pearson Education, Inc.  Strong Electrolytes Are… Strong acids Strong bases Soluble ionic salts Aqueous Reactions © 2012 Pearson Education, Inc. Which of the following will not form an electrolyte when dissolved in water? A. Sodium Chloride B. Nitric acid C. Ethanol D. Sodium hydroxide Aqueous Reactions © 2012 Pearson Education, Inc.  Which of the following will make the weakest electrolyte A. Calcium hydroxide B. Sodium hydroxide C. Sulfuric acid D. Ethanoic acid Aqueous Reactions © 2012 Pearson Education, Inc.  Precipitation Reactions When one mixes ions that form compounds that are insoluble (as could be predicted by the solubility guidelines), a precipitate is formed. Aqueous Reactions © 2012 Pearson Education, Inc.  Metathesis (Exchange) Reactions Metathesis comes from a Greek word that means “to transpose.” AgNO3(aq) + KCl(aq)  AgCl(s) + KNO3(aq) Aqueous Reactions © 2012 Pearson Education, Inc.  Metathesis (Exchange) Reactions Metathesis comes from a Greek word that means “to transpose.” It appears as though the ions in the reactant compounds exchange, or transpose, ions: AgNO3(aq) + KCl(aq)  AgCl(s) + KNO3(aq) Aqueous Reactions © 2012 Pearson Education, Inc.  Solution Chemistry It is helpful to pay attention to exactly what species are present in a reaction mixture (i.e., solid, liquid, gas, aqueous solution). If we are to understand reactivity, we must be aware of just what is changing during the course of a reaction. Aqueous Reactions © 2012 Pearson Education, Inc.  Molecular Equation The molecular equation lists the reactants and products in their molecular form: AgNO3(aq) + KCl(aq)  AgCl(s) + KNO3(aq) Aqueous Reactions © 2012 Pearson Education, Inc.  Ionic Equation In the ionic equation all strong electrolytes (strong acids, strong bases, and soluble ionic salts) are dissociated into their ions. This more accurately reflects the species that are found in the reaction mixture: Ag+(aq) + NO3−(aq) + K+(aq) + Cl−(aq)  AgCl(s) + K+(aq) + NO3−(aq) Aqueous Reactions © 2012 Pearson Education, Inc.  Net Ionic Equation To form the net ionic equation, cross out anything that does not change from the left side of the equation to the right: Ag+(aq) + NO3−(aq) + K+(aq) + Cl−(aq)  − AgCl(s) + K (aq) + NO3 (aq) + Aqueous Reactions © 2012 Pearson Education, Inc.  Net Ionic Equation To form the net ionic equation, cross out anything that does not change from the left side of the equation to the right. The only things left in the equation are those things that change (i.e., react) during the course of the reaction: Ag+(aq) + Cl−(aq)  AgCl(s) Aqueous Reactions © 2012 Pearson Education, Inc.  Net Ionic Equation To form the net ionic equation, cross out anything that does not change from the left side of the equation to the right. The only things left in the equation are those things that change (i.e., react) during the course of the reaction. Those things that didn’t change (and were deleted from the net ionic equation) are called spectator ions: Ag+(aq) + NO3−(aq) + K+(aq) + Cl−(aq)  − AgCl(s) + K (aq) + NO3 (aq) + Aqueous Reactions © 2012 Pearson Education, Inc.  Writing Net Ionic Equations 1. Write a balanced molecular equation. 2. Dissociate all strong electrolytes. 3. Cross out anything that remains unchanged from the left side to the right side of the equation. 4. Write the net ionic equation with the species that remain. Aqueous Reactions © 2012 Pearson Education, Inc.  Acids The Swedish physicist and chemist S. A. Arrhenius defined acids as substances that increase the concentration of H+ when dissolved in water. Both the Danish chemist J. N. Brønsted and the British chemist T. M. Lowry defined them as proton donors. Aqueous Reactions © 2012 Pearson Education, Inc.  Acids There are only seven strong acids: Hydrochloric (HCl) Hydrobromic (HBr) Hydroiodic (HI) Nitric (HNO3) Sulfuric (H2SO4) Chloric (HClO3) Perchloric (HClO4) Aqueous Reactions © 2012 Pearson Education, Inc.  Bases Arrhenius defined bases as substances that increase the concentration of OH− when dissolved in water. Brønsted and Lowry defined them as proton acceptors. Aqueous Reactions © 2012 Pearson Education, Inc.  Bases The strong bases are the soluble metal salts of hydroxide ion: Alkali metals Calcium Strontium Barium Aqueous Reactions © 2012 Pearson Education, Inc.  Acid-Base Reactions In an acid–base reaction, the acid donates a proton (H+) to the base. Aqueous Reactions © 2012 Pearson Education, Inc.  Neutralization Reactions Generally, when solutions of an acid and a base are combined, the products are a salt and water: CH3COOH(aq) + NaOH(aq) CH3COONa(aq) + H2O(l) Aqueous Reactions © 2012 Pearson Education, Inc.  Neutralization Reactions When a strong acid reacts with a strong base, the net ionic equation is HCl(aq) + NaOH(aq)  NaCl(aq) + H2O(l) Aqueous Reactions © 2012 Pearson Education, Inc.  Neutralization Reactions When a strong acid reacts with a strong base, the net ionic equation is HCl(aq) + NaOH(aq)  NaCl(aq) + H2O(l) H+(aq) + Cl−(aq) + Na+(aq) + OH−(aq)  Na+(aq) + Cl−(aq) + H2O(l) Aqueous Reactions © 2012 Pearson Education, Inc.  Neutralization Reactions When a strong acid reacts with a strong base, the net ionic equation is HCl(aq) + NaOH(aq)  NaCl(aq) + H2O(l) H+(aq) + Cl−(aq) + Na+(aq) + OH−(aq)  Na+(aq) + Cl−(aq) + H2O(l) H+(aq) + OH−(aq)  H2O(l) Aqueous Reactions © 2012 Pearson Education, Inc.  Gas-Forming Reactions Some metathesis reactions do not give the product expected. In this reaction, the expected product (H2CO3) decomposes to give a gaseous product (CO 2): CaCO3(s) + HCl(aq) CaCl2(aq) + CO2(g) + H2O(l) Aqueous Reactions © 2012 Pearson Education, Inc.  Gas-Forming Reactions When a carbonate or bicarbonate reacts with an acid, the products are a salt, carbon dioxide, and water: CaCO3(s) + HCl(aq) CaCl2(aq) + CO2(g) + H2O(l) NaHCO3(aq) + HBr(aq) NaBr(aq) + CO2(g) + H2O(l) Aqueous Reactions © 2012 Pearson Education, Inc.  Gas-Forming Reactions Similarly, when a sulfite reacts with an acid, the products are a salt, sulfur dioxide, and water: SrSO3(s) + 2HI(aq) SrI2(aq) + SO2(g) + H2O(l) Aqueous Reactions © 2012 Pearson Education, Inc.  Gas-Forming Reactions This reaction gives the predicted product, but you had better carry it out in the hood, or you will be very unpopular! But just as in the previous examples, a gas is formed as a product of this reaction: Na2S(aq) + H2SO4(aq)  Na2SO4(aq) + H2S(g) Aqueous Reactions © 2012 Pearson Education, Inc. 1. When a strong acid reacts with a strong base, the net ionic equation can best be described by which of the following? A. H+(aq) + OH- (aq)  H2O(l) B. H2O(l)  H+(aq) + OH- (aq) C. H+(aq) + OH- (aq)  H2(g) D. H2O(l)  H+(l) + OH- (l) Aqueous Reactions © 2012 Pearson Education, Inc. 1. Gas-forming reactions between carbonates and acids typically yield which of the following products? Aqueous Reactions © 2012 Pearson Education, Inc.  Oxidation-Reduction Reactions An oxidation occurs when an atom or ion loses electrons. A reduction occurs when an atom or ion gains electrons. One cannot occur without the other. Aqueous Reactions © 2012 Pearson Education, Inc.  Oxidation Numbers To determine if an oxidation–reduction reaction has occurred, we assign an oxidation number to each element in a neutral compound or charged entity. Aqueous Reactions © 2012 Pearson Education, Inc.  Oxidation Numbers Elements in their elemental form have an oxidation number of 0. The oxidation number of a monatomic ion is the same as its charge. Aqueous Reactions © 2012 Pearson Education, Inc.  Oxidation Numbers Nonmetals tend to have negative oxidation numbers, although some are positive in certain compounds or ions. – Oxygen has an oxidation number of −2, except in the peroxide ion, in which it has an oxidation number of −1. – Hydrogen is −1 when bonded to a metal, +1 when bonded to a nonmetal. Aqueous Reactions © 2012 Pearson Education, Inc.  Oxidation Numbers Nonmetals tend to have negative oxidation numbers, although some are positive in certain compounds or ions. – Fluorine always has an oxidation number of −1. – The other halogens have an oxidation number of −1 when they are negative; they can have positive oxidation numbers, however, most notably in oxyanions. Aqueous Reactions © 2012 Pearson Education, Inc.  Oxidation Numbers The sum of the oxidation numbers in a neutral compound is 0. The sum of the oxidation numbers in a polyatomic ion is the charge on the ion. Aqueous Reactions © 2012 Pearson Education, Inc.  1. What is the oxidation number of ‘S’ in H2S? A. -1 B. +1 C. -2 D. +2 Aqueous Reactions © 2012 Pearson Education, Inc.  Displacement Reactions In displacement reactions, ions oxidize an element. The ions, then, are reduced. Aqueous Reactions © 2012 Pearson Education, Inc.  Displacement Reactions In this reaction, silver ions oxidize copper metal: Cu(s) + 2Ag+(aq)  Cu2+(aq) + 2Ag(s) Aqueous Reactions © 2012 Pearson Education, Inc.  Displacement Reactions The reverse reaction, however, does not occur: x Cu(s) + 2Ag+(aq) Cu2+(aq) + 2Ag(s)  Aqueous Reactions © 2012 Pearson Education, Inc. Activity Series Aqueous Reactions © 2012 Pearson Education, Inc.  Molarity Two solutions can contain the same compounds but be quite different because the proportions of those compounds are different. Molarity is one way to measure the concentration of a solution: moles of solute Molarity (M) = volume of solution in liters Aqueous Reactions © 2012 Pearson Education, Inc. Mixing a Solution To create a solution of a known molarity, one weighs out a known mass (and, therefore, number of moles) of the solute. The solute is added to a volumetric flask, and solvent is added to the line on the neck of the flask. Aqueous Reactions © 2012 Pearson Education, Inc.  Dilution One can also dilute a more concentrated solution by – Using a pipet to deliver a volume of the solution to a new volumetric flask, and – Adding solvent to the line on the neck of the new flask. Aqueous Reactions © 2012 Pearson Education, Inc.  Dilution The molarity of the new solution can be determined from the equation Mc  Vc = Md  Vd, where Mc and Md are the molarity of the concentrated and dilute solutions, respectively, and Vc and Vd are the volumes of the two solutions. Aqueous Reactions © 2012 Pearson Education, Inc.  Using Molarities in Stoichiometric Calculations Aqueous Reactions © 2012 Pearson Education, Inc. 1. Calculate the molarity of a solution made by dissolving 40 g of sodium sulfate (Na 2SO4) in enough water to give 0.563 L of solution. A. 0.07 B. 0.50 C. 14.08 D. 0.01 Aqueous Reactions © 2012 Pearson Education, Inc. 1. How many milliliters of 6 M HCl must be diluted to prepare 775 ml of 0.30 M HCl solution? M1V1 = M2V2. A. 38.75 ml B. 0.039 ml C. 15.50 ml D. 1.40 ml Aqueous Reactions © 2012 Pearson Education, Inc.  Titration Titration is an analytical technique in which one can calculate the concentration of a solute in a solution. Aqueous Reactions © 2012 Pearson Education, Inc.