Shelf Life Testing 'Use-by' Dates for Food Safety PDF

Shelf life testing ‘Use-by’ dates for food safety NSW/FA/FI065/1002 Contents Contents.......................................................................................................................... 2 Executive summary.......................................................

Shelf life testing ‘Use-by’ dates for food safety NSW/FA/FI065/1002 Contents Contents.......................................................................................................................... 2 Executive summary.......................................................................................................... 3 When is date marking required?........................................................................................ 4 How is shelf life determined?............................................................................................ 6 Product development.................................................................................................... 6 Product stability and food safety.................................................................................... 6 Challenge tests............................................................................................................. 8 Expiry testing program.................................................................................................. 9 Use by estimation – an auditable program..................................................................... 9 Determination of best before dates................................................................................... 9 References.................................................................................................................... 10 Related reading.............................................................................................................. 10 Shelf life testing – use by dates for food safety Page 2 of 10 Executive summary Date marking of foods is regulated by Standard 1.2.5 – Date Marking of Food of the Australia New Zealand Food Standards Code. If: nutrient levels decline to unacceptable levels in a food intended by the manufacturer to form the sole source of nutrition for a person’s diet for a specified period or the food can become microbiologically unsafe before the food noticeably spoils then a use by date is applicable. Where deterioration of a food affects consumer acceptance without impacting health and safety a best before date is applicable. Foods with a shelf life of at least two years are not required to display a best before date. The length of the use by time for foods can be determined by using storage trials to estimate the physical, chemical and microbiological stability of the food. Interpretation of results requires technical experience and competence. Some products will require additional studies such as computer models of microbial growth or challenge studies. It is the manufacturer’s responsibility to determine shelf life. Reliable use by or best before times cannot be determined by guesswork or by copying the shelf life of a competitor’s product. Shelf life testing – use by dates for food safety Page 3 of 10 When is date marking required? Date marking of foods is regulated by Standard 1.2.5. A fact sheet (FSANZ 2003) and a user guide (ANZFA 2001) to this standard are available on the Food Standards Australia New Zealand (FSANZ) website. Standard 1.2.5, the guidance materials and other labelling standards should be consulted to understand the specific legal requirements relating to date marking. If food must be eaten within a certain period for health or safety reasons a use by date is required: The ‘health reason’ is applicable to food that is intended by the manufacturer to form the sole source of nutrition for a person’s diet for a specified period. This will apply where storage affects the critical nutrient profile of products such as infant formula or special dietary foods manufactured to provide the sole source of nutrition to persons who are ill or are unable to eat normal foods. The ‘safety reason’ is applicable to food that can become microbiologically unsafe before the food noticeably spoils. This will not apply to shelf stable, frozen or most raw foods but may apply to certain chilled ready-to-eat foods, for example chilled meals and salads. Development of use by dates for safety reasons is discussed below. A best before date is applicable to food where deterioration affects consumer acceptance without impacting on health and safety. Many product changes will affect consumer acceptance, including: rancidity texture changes moisture loss moisture gain staling flavour loss light induced changes enzymatic browning chemical browning, and microbial spoilage. There is an exemption from best before date marking for products with a shelf life of two years or longer. A scan of supermarket shelves identified few products that were not date marked. These included sugar, golden syrup, treacle, honey, some soft drinks, canned fruit, canned vegetables, canned soup, vinegar, some canned fish and some cook-in sauces. Apart from these products, a shelf life of two years or longer is uncommon. While is it not mandatory in Australia some international food regulators recommend that all food be date marked to support ‘first in – first out’ food consumption. The flow chart (over page), which is adapted from the user guide to Standard 1.2.5, helps with the decision between best before and use by date marking. Shelf life testing – use by dates for food safety Page 4 of 10  Food safety date marking decision support Is the food shelf stable? Yes No Is the food frozen? Yes No Is the food a raw food that requires a process such as cooking to reduce food- Yes poisoning bacteria to make the food safe to eat? Best before date to be No applied if shelf life is less than 2 years. Is the food a chilled ready-to-eat No product? Yes Is there a reasonable likelihood that the food could contain one of the following food poisoning bacteria: Listeria No monocytogenes, Yersinia enterocolitica or cold tolerant strains of Bacillus cereus or Clostridium botulinum? Yes Will the food discernibly spoil before levels of bacteria would reach Yes dangerous levels? No Reference: ANZFA 2001 Use by date to be applied Shelf life testing – use by dates for food safety Page 5 of 10 How is shelf life determined? There are many answers to this question, depending on the type of deterioration that the product undergoes. The NSW Food Authority has food safety as a primary objective and so considers reliable use by dates to be essential. If use by or best before dates are overstated there is a substantial risk of damage to a business’s reputation and brands. Food businesses must attend to all date marking requirements but this document will focus on the setting of reliable use by dates. Product development Product development must be well advanced before a business can have confidence in shelf life estimates. The business must be able to reliably produce homogeneous product with consistency from batch to batch. Physical and chemical factors that impact on the capacity of bacteria to grow, such as pH, water activity and evenness of mix (distribution of moisture, salt, preservative or food acid) must be well controlled. The physical, chemical and microbiological profile of several batches of finished product must be established. The potential for product contamination must be evaluated. The packaging materials must be identified. Product stability and food safety Initial studies are likely to consist of storage trials under the recommended storage conditions. Refrigerated storage trials should be run at 5°C and under conditions of mild temperature abuse equal to what might be encountered in the commercial cold chain. Products should be inspected at suitable times and samples tested for stability of the critical physical and chemical characteristics. These trials also provide an opportunity to commence microbiological tests for both spoilage organisms and the cold-tolerant pathogens named in the flow chart above. The trials should continue beyond the targeted shelf life unless the product fails earlier. Subtle changes during storage can be significant: Does pH change eg due to microbial growth or failing buffering systems? Is water redistributed within the product eg due to syneresis, condensation or a broken emulsion? Is the preservative system stable? Are there any signs of surface growth of microorganisms? Does any modified atmosphere persist for required times? Do chemicals migrate from the food-contact materials into the food? Are there any unforeseen changes to the product? The trials should lead to an understanding of target levels and ranges for the critical physical and chemical characteristics of the product over the intended shelf life. The worst case or least restrictive values (maximum or minimum as the case may be) of the key chemical characteristics can then be compared to published values to evaluate the opportunity for microbial growth, particularly for the key cold-tolerant pathogens. The user guide to Standard 1.2.5 provides much of the information likely to be required to complete the evaluation. Critical values for individual factors are shown in Table 1. Shelf life testing – use by dates for food safety Page 6 of 10 Table 1: Limits for growth of cold-tolerant pathogens Pathogen Temperature Salt pH aw Comment Bacillus cereus 7%1