nIO PC Kit Outdoor Photocell Interface Kit PDF

Catalog Number: Date: Project: OVERVIEW The nLight nIO PC KIT provides an outdoor photocontrol solution for nLight networks. In addition to a weatherproof outdoor photocontrol that mounts to any...

Catalog Number: Date: Project: OVERVIEW The nLight nIO PC KIT provides an outdoor photocontrol solution for nLight networks. In addition to a weatherproof outdoor photocontrol that mounts to any 1/2" knockout, the nIO PC KIT includes an interface device with a normally low input. This device called a nIO NLI, detects the state of the photocontrol and communicates it over the nLight network to a relay(s) controlling a lighting load. The nIO NLI can also trigger local or remote control scenes to run when the photocontrol’s state changes. The nIO NLI is daisy-chain wired into any zone of nLight devices (sensors, power packs, WallPods) using CAT-5e cabling. Power to the nIO NLI device is provided by the CAT-5e connection to an nLight power pack/ nIO PC Kit supply within its zone, or a Bridge. Power to the outdoor photocontrol is provided via Class 2 wires from the Outdoor Photocell included PS 150 power supply or other low voltage source (for example the auxiliary power output on an ARP Panel. Interface Kit The nIO NLI can trigger one of several modes when the connected outdoor photocontrol changes states: WallPod Mode: Turns relays on/off within its zone Local Scene Mode: Initiates a scene to run on its local zone Remote Scene Mode: Requests the Gateway to run a system profile on non-local devices or zones FEATURES Kit Provides both Outdoor Photocell & Specialized nIO Interface Device nIO Interfaces Outdoor Photocell Using Normally Low Input Sends Toggle Signal to Relays within Local Zone Initiates a Local or Remote Scene Communicates w/ nLight Network Remotely Configurable/Upgradeable Push-Button Programmable *Outdoor Photocell (PC) is model Includes PS 150 Power Supply number LCS-624D from Precision Mulitple Controls Inc. nIO NLI 1S Action Daylight Condition PC Output WallPod Mode Scene Mode Night Time High Exert On Send Scene Day Time Low Exert Off Run Defaults Government Procurement BAA – Buy America(n) Act: Product with the BAA option qualifies as a domestic end product under the Buy American Act as implemented in the FAR and DFARS. Product with the BAA option also qualifies as manufactured in the United States under DOT Buy America regulations. BABA – Build America Buy America: Product with the BAA option also qualifies as produced in the United States under the definitions of the Build America, Buy America Act. Please refer to www.acuitybrands.com/buy-american for additional information. Warranty Five-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-conditions Note: Actual performance may differ as a result of end-user environment and application Specifications subject to change without notice. Capable This item is an A+ capable component, which has been designed and tested to provide out-of-the-box luminaire compatibility with simple commissioning, when included as part of an A+ Certified™ Solution. To learn more about A+, visit www.acuitybrands.com/aplus. ORDERING INFORMATION nIO PC KIT Example: nIO PC KIT Series Buy America(n) nIO PC KIT [blank] Standard BAA Buy America(n) Act and/or Build America Buy America Qualified Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitycontrols.com NIO PC KIT © 2014-2024 Acuity Brands Lighting, Inc. All rights reserved. Rev. 04/16/24 1 of 2 WIRING OPTION 1* OPTION 2* *Note, line connection to power supply not shown. Additional nLight devices are required to switch lighting load (e.g., nPP16). *Note, line and load connections to ARP Panel not shown. - BLK + RED - BLK + RED GRY GRY RED BLK - + RED BLK - + Outdoor Outdoor nIO NLI Photocontrol PS 150 Photocontrol nIO NLI nPANEL 4 ARP PANEL Unit Power Unit Supply ORN WHT CAT-5 ORN WHT CAT-5 CAT-5 Note: If wiring to ARP card, Red and Black class2 wire to be wired to the Sensor or Override inputs of the ARP panel. SPECIFICATIONS (nIO NLI) Size: 3.38"H x 2.53"W x 1.83"D (8.59 cm x 6.43 cm x 4.65 cm) Weight: 2 oz Color: White Network Connection: 2 RJ-45 each device Power Requirements: < 3 mA Wires: 20 AWG (3) RoHS Compliant (PC) Size: 3.50" H x 1.25" W x 0.25" D (8.89 cm x 3.18 cm x 0.64 cm) Mounting: 1/2" KO in any approved weatherproof outdoor box Weight: 4 oz Color: Gray PowerRequirements: < 35 mA @ 12-28 VDC Wires: 20 AWG (3) (PS150) Size: (not including ½" chase nipple) 3.00" H x 2.25" W x 1.88" D (7.62 cm x 5.72 cm x 4.78 cm) Weight: 6 oz Mounting: 1/2" KO Color: Black Operating Voltage: 120/277 Output Voltage, Current: 15 VDC, 150 mA Wires: 18 AWG (3) & 20 AWG (2) RoHS Compliant TN-704-02 Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitycontrols.com NIO PC KIT © 2014-2024 Acuity Brands Lighting, Inc. All rights reserved. Rev. 04/16/24 2 of 2